• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.105-109
• /
• 1970

Thiamin in the various materials which used for Takja braving was determined and its quantitative changes in the Takju mashes which were mashed with polished rice and wheat flour respectively using Nuruk only for the enzyme source, and with wheat flour and corn powder respectively using Nuruk and Koji, were checked at 24 hours intervals during the whole brewing period. The results obtained were as follows. a) The thiamin contents in 100 grams of each materials were: Polished rice 107.8${\gamma}$ Wheat Pour 185.0${\gamma}$ Corn powder 410.2${\gamma}$ Nuruk 347.4${\gamma}$ Koji of wheat flour 170.1${\gamma}$ Koji of corn powder 257.3${\gamma}$ b) About 40 to 50 percent of thiamin in the polished rice, wheat flour and, corn powder were losed by steaming at 10 wounds for 50 minutes. c) The quantitative changes of thiamin in the Takju meshes showed a similar tendency. Thiamin contents were decreased markedly during 2 days after mashing but thereafter, almost unchanged till the mashes were ripened. Its decreasing rates in tile two plots uses Nuruk and Koji wereless thaw those in the two plots used Nuruk only. d) Approximately 6${\gamma}$ of thiamin was determined in 100 ml. of the ripened mash of the rice plot and 7.5${\gamma}$ in tire whet flour plot in the case of using Nuruk only. 12.4${\gamma}$ of thiamin was determined in 100 ml. of the ripened mash of the wheat flour plot and 15.4${\gamma}$in the corn powder plot in the case of using Nuruk and Koji. e) It was assumed that 2.4 to 3.5${\gamma}$ of thiamin were contained in 100 ml. of finished Takju of the two plots used Nuruk only and 5 to 7${\gamma}$ in the two plots used Nuruk and Koji. f) About 43.7${\gamma}$ of thiamin were determined in 100 grams of Takju cake of the rice plot and 56.1${\gamma}$ in the wheat flour plat used Nuruk only, and 81.4${\gamma}$ in the corn powder plot and 57.7${\gamma}$ in the wheat flour plot used Nuruk and Koji.

• Journal of the Korean Society of Food Culture
• /
• v.7 no.3
• /
• pp.213-222
• /
• 1992

This investigation was undertaken for the purpose of studying the quality and acceptability during storage at room or refrigerator temperature of Yackwa containing waxy rice flour substituted for 0,10,30,50,70% of the wheat flour. The storage periods were 0,15,30 and 45 days. Chemical composition, composition of fatty acids, and value, and peroxide values of Yackwa were measured. Sensory evaluation was done by a panel of 5 judges majoring in food and nutrition. The evaluation was repeated 4 times. Objective evaluation was done by rheometer and color difference meter. Chemical composition of Yackwa were $5.9{\sim}6.8%$ for moisture, $3.43{\sim}4.09%$ for crude protein, $22.35{\sim}27.65%$ for crude fat, $0.27{\sim}0.31%$ for ash, $15.6{\sim}18.4%$ for fructose, $10.6{\sim}13.7%$ for glucose, $0.34{\sim}1.0%$ for sucrose, and $0.79{\sim}2.37%$ for maltose, respectively. Fatty acid contents of Yackwa were $10.54{\sim}10.73%$ for palmitic acid, $4.12{\sim}4.18%$ for stearic acid, $25.8{\sim}26.9%$ for oleic acid, $51.6{\sim}52.1%$ for linoleic acid, and $0.27{\sim}0.34%$ for linolenic acid, respectively. Acid value and peroxide value of Yackwa during storage showed little change. As a result of sensory evaluation for Yackwa made various levels of waxy rice flour, there were no significant differences in most of characteristics between the samples supplemented with waxy rice flour to 30% of wheat flour at 0.01% level. By the color difference meter, the value of L (lightness) and b (yellowness) were increased by increasing the amounts of waxy rice flour, however, there were no significant differences at 0.1% level between the samples supplemented with waxy rice flour to 30% of wheat flour, on the other hand, the value of a (redness) was decreased by increasing the amount of waxy rice flour. In the textural characteristics, brittleness, and chewiness were increased by increasing the amounts of waxy rice flour, and by lengthening the storage period, on the other hand, resilience and cohesiveness showed vice versa. In the correlation coefficient between sensory characteristics and mechanical characteristics, overall acceptability in sensory evaluation correlated significantly with cohesiveness, chewiness, and the values of L, a, and b in mechanical test in most of samples(p<0.001).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.981-985
• /
• 2011

The effects of germinated brown rice flour on the quality characteristics of white wheat flour noodles were investigated. The insoluble dietary fiber and soluble dietary fiber content of germinated brown rice flour were 5.1% and 4.2%, respectively. Water absorption, development time, and stability of farinogram decreased when germinated brown rice flour was added to white wheat flour. Brightness ($L^*$) decreased, but redness ($a^*$) increased in noodles made from germinated brown rice. Volume of cooked noodles did not change upon addition of germinated brown rice flour, but weight of cooked noodles decreased and the turbidity of cooked water increased. The cutting force of cooked noodles did not change upon addition of germinated rice flour. Addition of 10% germinated brown rice flour to white wheat flour did not have any effects on flavor, color, taste, appearance, and overall acceptability in sensory evaluation.

• Culinary science and hospitality research
• /
• v.12 no.2 s.29
• /
• pp.206-221
• /
• 2006

To establish an optimum formula for processing wet noodles with steam-dried Hizikia fusiformis flour(SHF), it was incorporated into wheat flour by the ratio of 0, 1, 3, 5, 10 and 20% based on a flour weight. Application of 2% mehthylcelluose(MC) to improve the texture of noodles mixed with SHF was also attempted. Evaluation was performed on the dough rheology and wet noodle quality, such as cooking characteristics, mechanical texture properties, sensory value and shelf-life. Water absorption rate of the composite flour increased linearly as the content of SHF increased from 1% to 10%, and noodle sheet-formation was also acceptable in the same content level. The weight and volume of cooked noodles were decreased, and turbidity of soup was, if exceeding more than 5% of SHF, increased constantly. However, these problems could be remarkably resolved in SHF plus 2% MC. Texture profile analysis of cooked noodles showed an increase of hardness, gumminess, and chewiness up to 5% SHF. The results of sensory evaluation showed that cooked noodles containing 5% SDF were acceptable as much as wheat four noodles in terms of color, texture, taste and flavor. Based on cooking properties, rheological and sensory evaluation, addition of 5% SHF plus 2% MC was suggested to be suitable for making wet noodles, of which the shelf-life was estimated to be 8 days at $5^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.28-32
• /
• 1976

This study was carried out to know the adaptability of barley flour, potato flour and white ash as extender and filler of urea-formaldehyde resin for plywood as a substitute material of wheat flour. The extenders and filler used at this study were extended by several groups of percentages. Shear strength, moisture contents, and specific gravities were compared among tested groups. The results obtained are summarized as follows. 1) Wet and dry shear strength of plywoods extended by 10% barley flour, 30% potato flour, and wheat flours were shown better results than non extended plywoods. 2) There was no significant difference between plywoods extended until 50% barley flours and non extended plywoods. 3) Shear strength of plywoods extended by 50% potato and 100% barley flours were shown worse result than non extended. 4) Dry and wet shear strength of plywoods extended by white ash were shown worst result. 5) The plywoods extended by potato flours were shown not only better shear strength, but also considered more profitable cost for extending.

• Journal of Korean Society of Forest Science
• /
• v.48 no.1
• /
• pp.40-50
• /
• 1980

This research was carried out to examine the substitutional feasibility of low-priced materials produced in waste of forest instead of wheat flour which is extended for plywood adhesives. Wheat, pine bark, wood flour and pine foliage of coniferous trees or poplar foliage of hardwood species were selected and pulverized into 60-100 mesh minute powder after they were dried at $100-105^{\circ}C$ during 24 hours in the drying oven. The prepared particles as above were added to urea formaldehyde resin, urea-melamine copolymer resin and water soluble phenol formaldehyde resin in the ratio of 10, 20, 30 and 50%. After plywoods were processed by the above extending ratios, shear strength of extended plywoods were analyzed and discussed. The results obtained at this study were summarised as follows; 1. In the case of urea formaldehyde resin, both dry and wet shear strength of plywoods extended by wheat flour were shown the highest value. 2. Dry shear strength of urea-melamine copolymer resin was better than that of urea formaldehyde resin on the whole, while plywoods extended by wheat flour were shown excellent results. 3. Among 10% and 20% extensions of urea-melamine copolymer resin, the best results were shown by poplar leaves powder, wheat powder and wood flour. They had no significant difference statistically. 4. In the case of water soluble phenol formaldehyde resin, although dry shear strength of pine leaves powder was higher than that of wheat flour in the ratio of 10%, there was no significant difference between them in the ratio of 10 and 20%. 5. Among 20, 30 and 50% extensions of water soluble phenol formaldehyde resin, wet shear strength of wood flour and bark powder was higher than that of wheat flour. Wet shear strength of wood flour in the ratio of 10% was shown the same tendency as above.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.406-411
• /
• 2007

In this study the replacement of wheat flour with 5 to 30% black rice flour was tested to examine its effect on sponge cake making properties. We evaluated the effects of the substitutions on various quality parameters of the cake, such as physicochemical and rheological properties, cake making quality, and texture characteristics. The water holding capacity value increased with increasing amounts of black rice flour, whereas the alkaline water retention capacity, Pelshenke value and sedimentation value decreased. The mixograph peak time and peak height, and the Rapid Visco Analyser peak, minimum, and final viscosity decreased with the addition of black rice flour. Increasing proportions of black rice flour resulted in reduced loaf volume. However, replacing 15% of the wheat flour with black rice flour did not significantly affect the characteristics of the sponge cake. The textural characteristics of the sponge cake crumb were influenced by the addition of black rice flour, and sponge cakes containing the additives showed increases in hardness, gummines, and chewiness.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1973

Noodles and cookies were made from composite flours based on domestic resources and their quality was assessed to obtain the following results. 1) Various flours containing $10{\sim}20%$ defatted soy flour did not form belt in noodle-making process, but the use of 1.5% GMS + 2% Methocel as binder was very effective in noodle-belt formation and cooking quality. 2) Out of four raw flours, naked barley flour was most suitable for noodle-making. Addition of wheat flour at 25% or 50% level into the four composite flours greatly improved the quality of noodles and particularly that based on naked barley was similar to wheat flour in color and gave rather palatable taste. 3) Though cookie could be made from any composite flours without using GMS or CSL, naked barley flour was the best in sensory evaluation of the product. 4) Addition of wheat flour at 25% or 50% level into above composite flours gave cookies comparable to standard wheat product except the case of composite flour based on defatted rice bran.

• Applied Biological Chemistry
• /
• v.33 no.3
• /
• pp.216-222
• /
• 1990

For the improvement of the nutritive value of extruded noodles, dry soymilk residue flour (DSRF) was mixed with wheat How. The effects of the addition of DSRF on the viscosity of wheat flour and the quality of cooked noodles were evaluated As the proportion of DSRF addition was in-creased the viscosity of composite flour was decreased And so were the texture and cooking quality of noodles. To improve noodle-making characteristics of extruded noodles with 10% DRFF, Na-alginate, Na-carboxymethyl cellulose, guar gum crude gluten and xanthan gum were added. Then, the noodle-making characteristics were examined. The viscosity increased with the increase in the concentration of additives and Bnnthan gum was the most effective. The texture of noodles supplemented by Na-alginate 2.0%, Na-carboxymethyl cellulose 2.0%, guar gum 2.0%, xanthan gum 1.0% was similar to that of wheat flour noodles. The results of sensory test (color and texture) was coincidal with the results of instumental tests.

• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.683-688
• /
• 1991

Wheat flour was extruded by a single-screw extruder, and used for the ethanol production of takju. The molecular structure and enzymic susceptability of extruded starch were compared to those of steam cooked one. The gel permeation chromatographic pattern of wheat flour extrudates was not significantly different from those of raw and steam cooked starches. However, the conversion rate of extruded starch into maltose by ${\alpha}-amylase$ hydrolysis was significantly faster than those of raw ad steamed starch. The molecular weight of starch estimated from GPC pattern and the intrinsic viscosity were remarkably reduced by extrusion cooking followed by the enzymic hydrolysis for 30 min, while steam cooking and enzymic hydrolysis for 30 min did not change them significantly. Extrusion-cooked flour produced alcohol 26% higher than that of steamed flour in the laboratory takju fermentation, and 10% more alcohol in the pilot plant scale takju production.