• Journal of the Korean Applied Science and Technology
• /
• v.12 no.1
• /
• pp.19-27
• /
• 1995

The 2-packaged polyurethane coatings were synthesized, blending pheylmodified polyesters(of which synthetic methods were reported in the previous paper), Desmodur L-75(polyisocyanate wide1y used for coatings), wetting-dispersing agent, white pigment. etc. A variety of coating properties were tested for the coating treatment polyurethane coationgs. Compared with conventional 2-packaged polyure-thane coating, abrasion resistance and lightness index difference of the ones synthesized in the present work were somewhat decreased, but the coating properties such as hardness, gloss specular, cross hatch adhesion. etc. were improved. Especially, resistance against chemical reagents and salt were strikingly improved. In addition. the coationgs had short drying time and long pot-life. This shows that the coationgs are appropriate for rapid drying coatings.

• Korean Journal of Materials Research
• /
• v.31 no.8
• /
• pp.427-432
• /
• 2021

This study uses silicone monomer, DMA, crosslinking agent EGDMA, and initiator AIBN as a basic combination to prepare hydrogel lenses using fluorine-based perfluoro polyether and iron oxide and zinc oxide nanoparticles as additives. After manufacturing the lens using iron oxide nanoparticles and zinc oxide nanoparticles, the optical, physical properties, and polymerization stability are evaluated to investigate the possibility of application as a functional hydrogel lens material. As a result of this experiment, it is found that the addition of the wetting material containing fluorine changes the surface energy of the produced hydrogel lens, thereby improving the wettability. Also, the addition of iron oxide and zinc oxide nanoparticles satisfies the basic hydrogel ophthalmic lens properties and slightly increases the UV blocking performance; it also increases the tensile strength by improving the durability of the hydrogel lens. The polymerization stability of the nanoparticles evaluated through the eluate test is found to be excellent. Therefore, it is judged that these materials can be used in various conditions as high functional hydrogel lens material.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.46-51
• /
• 2018

A basic sprinkler system is a fire extinguishing system that can be easily installed in a fire-vulnerable place such as a publicly used establishments. However, the publicly used establishments are not only complicated in structure, but also have a large amount of flammable interior materials, and the users are not normally in a normal state, which is a very dangerous fire-fighting object. Therefore, due to the low fire extinguishing performance of the basic sprinkler system installed in the publicly used establishments, the fire suppression control can not be performed quickly in case of fire, which may increase the life and property damage. In this study, the cases of quantitative changes of extinguishing water used in basic sprinkler system and the cases of addition of additives such as wetting agents, reinforced agents to improve extinguishing performance were compared. Experimental results showed that the extinguishing performance was improved as the quantity of extinguishing water increase and the reinforced agents showed similar performance to that of 60% increase in the amount of extinguishing water. The cooling time to $200^{\circ}C$ and oxygen concentration were improved up to 14.3% and 34.5%, respectively. In the case of using the wetting agent, the cooling time to $200^{\circ}C$ and oxygen concentration did not show any significant improvement, but showed the effect of preventing deep seated fire. In order to prevent loss of life and property, it is necessary to improve the performance of the basic sprinkler system by increasing amount of extinguishing water or using additives like reinforced agents.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.171-175
• /
• 2010

This study was carried out to find the effect on growing media and proper time for water supply in rice seedling stages. Plant height of rice seedling for SIPAN-BRL among current several growing medias was higher in Chuchungbyeo than Ilpumbyeo, and that of root length was higher in check among used growing medias. Fresh and dry weight of shoot and root of two rice cultivar. Water time to absorption on each treatment of growing media concentration took similarly in SIPAN-BNH and check were similar. But 500 minutes did in 100ppm and did 370 and 470minute in 300 and 500ppm, respectively. Wilting time of rice seedling was appeared highly at 300ppm of SIPAN-BRL in Chuchungbyeo and 100ppm of SIPAN-BRL in Ilpumbyeo, while it prolonged at 300ppm in Chuchungbyeo and 500ppm in Ilpumbyeo, respectively. Water content at wilting stage was appeared highly at SIPAN-BRL 500ppm in both Chuchungbyo and Ilpumbyeo, while SIPAN-BNL was high in 300ppm of Chuchung-byeo and Ilpumbyeo, respectively. Plant and root length of SIPAN-BNL treated with 300ppm in 10day-rice seedling were highly appeared, while dry weight of shoot was high at 300ppm SIPAN-BNL.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.43-52
• /
• 2007

Offset printing is one of the well known printing technique of lithographic process and consists of image area and 'non-image area on a flat image carrier. The surface tension of dampening water can be controlled by adding IPA after mixing of raw water and etching solution. The etching solution contains a surfactant for reducing surface energy, a clean agent for non-imaging area, wetting agent for protecting non-imaging area from oil components like ink and also an emulsifying agent for controlling emulsification. In this study, the present situation of dampening water maintenance has examined by collecting dampening water using at domestic companies. The pH related to dampening water, conductivity, contact angle, emulsification curve are measured to define the current situation of dampening water control of each companies and to analyze the relationship among measured properties. In the study most of companies among 16 printing companies tested controlling dampening water through pH value. However, the quality of printing has varied depending upon conductivity, contact angle, IPA content, and emulsification value. The control of dampening water should be carry at the state of the standard when adding proper ratio of etching solution. It would be more effective when pH or conductivity control carries out in parallel with controlling dampening water. Therefore the concept that pH5.5 is correct is based concept. Based on these initial tests it is defined that the standardization of dampening water control is required.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.237-245
• /
• 2001

A study was made on the chemical treatment of silica and silane coupling agents, bistriethox ysilylpropyltetrasulfide(Si 69) and ${\gamma}$-mercaptopropyltrimethoxy silane (MPS) for reinforcement of silica formulation. The effects of chemical treatment method and the most popular two coupling agents were examined. The results clearly indicate that the wet method, coupling agent is combined chemically with the silica prior to mixing, has more dispersion, wetting ability, dynamic properties and stability than the dry method, coupling agent is premixed directly with the silica. The mixing was done using a bench-type kneader having two mixing cam and a two-roll mill, under approximately similar conditions. The physical properties of SBR vulcanizates give rise to marked improvements by addition of Si 69 and MPS in comparison with without silane coupling agents. The optimum amount of Si 69 and MPS was 2 w/w% by experiments in the dry method but was 4 w/w% by EA and TGA analysis in the wet method.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.596-601
• /
• 2001

This study was carried out to determine the effect of base carriers such as zeolite or vermiculite on change of concentration of polyoxyethylene laury ether[$C_{12}H_{25}O(C_{2}H_{4}O)_{3}H$, PLE] and on initial wetting of peat-vermiculite medium in the development of a soil wetting agent using the mixture of PLE and polyoxyethylene+polyppro-pyleneoxide tridecylether (1:1, w/w, CM-1). The concentration of PLE in the treatment of vermiculite was higher than that of zeolite during the period from 2 to 6 weeks. The cumulative concentration of PLE released in the treatment of vermiculite was about $2800mg{\cdot}L^{-1}$ and zeolite was about $2300mg{\cdot}L^{-1}$. The treatments of PLE+CM-1 with zeolite or vermiculite as a carrier were effective in initial water retention of root media having more than 510 mL of water per pot, where as those of $AquaGro^{G}$ and control had 490 mL and 400 mL of water per pot, respectively. In the evaporative water loss, the treatment of zeolite and $AquaGro^{G}$ were faster than that of control and vermiculite. The control treatment had the fastest water movement in and the highest volume of water infiltrating into root medium among all treatments. Increased application rate of PLE+CM-1 did not increase water retention capacity. The treatment of $0.6g{\cdot}L^{-1}$ had the highest evaporative water loss and that of $0.3g{\cdot}L^{-1}$ had the highest amount of water infiltrating into root media among all other treatments.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.79-83
• /
• 2015

The fire accident is a representative type of disaster that can largely impact on business. Therefore, precautionary measures and rapid initial response is very important when a disaster occurs. The storage of porous combustibles is inevitable in coal yard, plywood processing industry, and others that are currently operating. Initial fire fighting of fire and identifying the ignition point in such a porous combustible storage space are so difficult that if the initial response is failed, being led to deep-seated fire, surface fire is likely to result in secondary damage. In addition, deep-seated fire can cause personal injuries and property damage due to a large amount of toxic gases and reignition. Therefore damage reduction measures is required around the storage space to handle a porous flammable. Improving the penetration performance of the concentration of the surfactant is carried out as underlying study, which is about an deep-seated fire extinguishing efficiency augmentation when using wetting agents. The porous materials used in the experiments is radiata pine wood flour, which occupies more than 75% of the domestic wood market. Fire fighting water is selected as Butyl Di Glycol (BDG), which is being used for infiltration extinguishing agent, and the experiment was carried out by producing a standard solution. The experiment was carried out on the basis of the Deep-Seated Fire Test of NFPA 18. The amount of watering, porous material to the internal amount of penetration, and runoff measurement out of the porous material was conducted. According to experimental results, as the surface tension is reduced, the surfactant concentration macroscopic penetration rate decreases, but infiltration to a porous material is shown to have growth characteristics.

• Clean Technology
• /
• v.24 no.4
• /
• pp.269-274
• /
• 2018

In this study, Life Cycle Assessment (LCA) of wet tissue manufacturing process was performed. The wet tissue manufacturing process consists of preparation of wetting agent (chemical liquid), impregnation of nonwoven fabric into wetting agent and primary and secondary packaging. Data and information were collected on the input and output of the actual process from a certain company and the database of the Korea Ministry of Environment and some foreign countries (when Korean unavailable) were employed to connect the upper and the lower process flow. Based on the above and the potential environmental impacts of the wet tissue manufacturing process were calculated. As a result of the characterization, Ozone Layer Depletion (OD) is 3.46.E-06 kg $CFC_{11}$, Acidification (AD) is 5.11.E-01 kg $SO_2$, Abiotic Resource Depletion (ARD) is $3.52.E+00\;1yr^{-1}$, Global Warming (GW) is 1.04.E+02 kg $CO_2$, Eutrophication (EUT) is 2.31.E-02 kg ${PO_4}^{3-}$, Photochemical Oxide Creation (POC) was 2.22.E-02 kg $C_2H_4$, Human Toxicity (HT) was 1.55.E+00 kg 1,4 DCB and Terrestrial Ecotoxicity (ET) was 5.82.E-04 kg 1,4 DCB. In order to reduce the environmental impact of the manufacturing process, it is necessary to improve the overall process as other general cases and change the raw materials including packaging materials with less environmental impact. Conclusively, the energy consumed in the manufacturing process has emerged as a major issue, and this needs to be reconsidered other options such as alternative energy. Therefore, it is recommended that a process system should be redesigned to improve energy efficiency and to change to an energy source with lower environmental impact. Due to the nature of LCA, the final results of this study can be varied to some extent depending on the type of LCI DB employed and may not represent of all wet tissue manufacturing processes in the current industry.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.72-81
• /
• 2000

Benzoic acid polyester/lactone polyol were synthesized by polycaprolactone 0201 as diol, trimethylolpropane as triol, adipic acid as dibasic acid, and benzoic acid as monobasic acid. Polyisocyanate prepolymer Desmodur N-100 of HDI-biuret type was used in this study. Two-component polyurethane coatings were prepared by blending benzoic acid polyester/polycaprolactone, polyisocyanate, wetting/dispersing agent, white pigment, and flowing agent. Various properties were examined on the film coated with the prepared polyurethane. They showed excellent physical properties such as abrasion resistance, accelerated weathering resistance, and yellowness index. They also showed good physical properties such as flexibility, impact resistance, 60$^{\circ}$ specular gloss, cross hatch adhesion, hydrocarbon resistance, and lightness index difference. Hardness of coating showed a little poor character. The introduction of polycaprolactone 0201 as diol in the polyurethane coatings improved the hydrocarbon resistance, impact resistance, and flexibility of coatings. According to the drying and curing behavior with the contents of benzoic acid, they seem to have reasonable coating properties such as drying time of 2 to 4 hours and pot-life time of 20 to 37 hours.