• Ocean and Polar Research
• /
• v.29 no.2
• /
• pp.123-134
• /
• 2007

Distribution patterns of sandy bottom macrobenthic communities were studied around the Hupo coastal area. The seasonal surveys were conducted at 15 chosen sites within a depth range of 10 to 50 m along 10 km of the coastline using a Smith-McIntyre grab $(0.05\;m^2)$ in 2005. Overall depth distribution following the direction of the offshore become deeper parallel to the coastline. A total of 319 macrobenthic species were sampled with a mean density of $1,972\;ind./m^2$, and mean biomass was 82.5 wet-weight $g/m^2$. The major individual-dominant species were three polychaetes Spiophanes bombyx ($436\;ind./m^2$), Scoletoma longifolia ($250\;ind./m^2$) and Magelona japonica ($170\;ind./m^2$), and bivalve Adontorhina subquadrata ($73\;ind./m^2$). Cluster analysis and non-metric multidimensional scaling (nMDS) analysis based on Bray-Curtis similarity identified 2 major station groups which corresponded to macrobenthic faunal assemblages and their characteristic species. In addition, environmental conditions were significantly different between station groups. Group I contained mostly 20 and 50 m deep sites and was associated with sandy mud. Group I was characterized by high abundance of S. bombyx, S. longifolia, A. subquadrata. It was divided into two sub-groups (I-I and I-II) in relation to depth. Sub-group I-I was associated with deeper sites than sub-group I-II. Group II included mostly inshore area shallower than 15 m and was associated with coarse and medium sand. Group II was characterized by Lumbrinerides hayashii and Urothoe grimaldii japonica.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.89-98
• /
• 1988

This research evaluated factors on cement-based solidification process designed for hazardous sludge produced from electroplating industry. Four factors of sand/cement ratio, water/cement ratio, amount of wet sludge and amount of a precipitator, were investigated in terms of leachability and compressive strength of the solidified materials. Results of triplicate tests and statistical analysis indicated that sand/cement ratio(S/C) had the greatest effect on leaching of Cr(VI) from the solidified materials while water/cement ratio(W/C) on Zn and compressive strength. Cr(VI) was fixed better than Zn by portland cement. An experimental modeing was developed to estimate leached metal concentration and compressive strength at a given condition. Proper mixing criteria were also suggested for the use of the solidified mixture as construction materials. In solidification of 30g dry sludge, optimal condition was studied for S/C ratio, W/C ratio and the weight of precipitator which were 1, 1.5 and 1.075g respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.1
• /
• pp.67-75
• /
• 1993

This study is to analyze both root growth and soil moisture extraction pattern during the growing period of upland crops with respect to soybean, redpepper, sesame. Field and lysimeter tests were conducted under 12 treatments of soil moisture level by the San Cristobal experimental design(1981) and 3 soil type(sand, sandy loam, silty loam) for 4 years('87-'90) at the experimental plot of Rural Development Administration located in Suwon. The results of this study are summarized as follows : 1.For soybean, redpepper and sesame, root growth in dry soil was better than that in wet soil and it could be expressed as a sin function in terms of time. Maximum root depth was about 55cm, 44cm, 40cm respectively. 2.The average soil moisture extraction pattern for soybean, redpepper and sesame were 61.4%, 62.8%, 79.5% for zone l(0-l5cm). 25.5%, 27.1%, 18.3%, for zone 2(15-30cm).11.4%, 9.8%, 2.3% for zone 3(30-45cm), 1.7%, 0.3%, 0.04% for zone 4(45-60cm) respectively. This means that Zone 1 would be the dominant zone in irrigation scheduling. 3.With respect to soybean, the soil moisture extraction pattern(SMEP) was varied somewhat according to the erent maintenance of soil moisture level. The average SMEP for high maintenance of soil moisture was 46%, 29%, 17%, 8%, for middle maintenance of soil moisture was 43%, 29%, 17%, 11 % and for low maintenance of soil moisture was 40%, 28%, 20%, 12%, respectively. 4.With respect to soybean, the soil moisture in the upper layer was distinctly consumed more than that in the lower layer for clay loam soil and the soil moisture of all layers was consumed evenly for sand soil. The SMEP for sandy loam soil showed a middle result compared with the above 2 soil types.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.1
• /
• pp.83-92
• /
• 2013

Backfill material with thermal resistivity which has $50^{\circ}C$-cm/Watt in wet and $100^{\circ}C$-cm/Watt in dry is requested to improve the power transfer capability for dissipation of heat production in underground power cables. In the field test performed by buried cable backfills, the backfill material developed from this study is compared with river sand and weathered soil (native soil) to investigate the effect of heat transfer in various seasons and locations of thermal sensors. As a result, the developed backfill material is faster approaching yielding temperature (critical heat) than that of river sand and weathered soil, and it has good dissipation capacity rather than other materials by keeping moisture content at dry season.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.371-381
• /
• 1997

Precipitation sampls were collected in Chonju-city during October 1994 to September 1995 and were analysed for major ions (N $a^{+}$, $K^{+}$, $Ca^{2+}$, $Mg^{2+}$, C $l^{[-10]}$ , NO/$_3$, S $O_4$$^{2-}$) and trace metals (Al, Cd, Ni, Pb, Sr, Zn) in addition to pH, in order to understand the chemical characteristics of acid rain and to estimate the origin of the determined ions. Most rain showed a neutral or alkaline character, and only 35% had a pH lower than 5.6. S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ are identified as the primary contributors to precipitation acidity in this region. Neutralization of precipitation acidity occurs as a result of the dissolution of alkaline compounds containing $Ca^{2+}$, $Mg^{2+}$ and $K^{+}$. S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ precipitation concentrations exhibit a seasonal pattern in which higher concentrations are observed during spring months and lower concentrations during summer months. However, the seasonal behavior of $H^{+}$ concentrations differs from this pattern, in that the highest concentrations occur during autumn months, owing to the different influence of neutralization processes. In all rain, S $O_4$$^{2-}$ concentration exceeded NO/$_3$$^{[-10]}$ concentration. The contribution of maritime sources to the total S $O_4$$^{2-}$ concentration was very low or negligible. For rain strongly affacted by yellow sand, $Ca^{2+}$, $Mg^{2+}$ and $K^{+}$ ions show a sharp increase in concentration, reflecting the increased amount of dust and soil suspended in atmosphere. At the same time, S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ concentrations are at their highest levels while $H^{+}$ values are not comparably elevated, presumably beacause much of the acidity has been neutralized by alkaline substances. The seasonal variance of trace metal concentrations in rainwater is similar to that of major cations. The annual wet flux of acidic pollutants and trace metals wat calculated to be as follows: N $O_3$$^{[-10]}$ ; 2.32 g/$m^2$, S $O_4$$^{2-}$, 5.34 g/$m^2$, Al; 6.30 mg/$m^2$, Cd; 0.62 mg/$m^2$, Ni; 4.08 mg/$m^2$, Pb: 9.76 mg/$m^2$, Sr; 5.94 mg/$m^2$, Zn; 111 mg/$m^2$./$m^2$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3C
• /
• pp.93-102
• /
• 2011

Most experimental studies on soil liquefaction are related to clean sands. However, soils in the field or reclaimed grounds commonly contain some amounts of silt and clay rather than clean sand only. Many researchers investigated the effect of fine contents on liquefaction resistance and mainly used non-plastic fines such as silts. In this study, 10% of plastic fines with various plasticity index (PI) such as 8, 18, 50, and 377 were mixed with wet Nakdong River sand and then loose, medium, and dense specimens were prepared by undercompaction method. A series of undrained cyclic triaxial tests were carried out by applying three different cyclic stress ratios. As a result, the liquefaction resistance tended to decrease as a PI of fines in the specimens with equal fine content increased. On the other hand, the difference between loose specimens with low and high plasticity fines was not clearly observed in terms of liquefaction resistance. However, in the case of dense specimens, liquefaction resistance decreased up to 40% as a plasticity of fines increased.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.186-193
• /
• 2002

This study was conducted to enhance the protein quality of wheat flour extrudates with the addition of fish sauce by-products and dried biji. The experimental design was used to determine the optimum ratio of each ingredient. The compositional and functional properties of test extrudate were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed that the influence of each ingredient on the mixture final product. Protein content of extrudate was increased by the addition of the dried biji, and bending failure stress of extrudate became hardened due to interaction effects between dried biji and pacific sand lance sauce by-product. Also, the addition of dried biji decreased ash and salt contents. An optimum formulation was obtained as 15.83 : 44.17 : 40% with numerical and 15.74 : 44.26 : 26.40% with graphical method (pacific sand lance sauce by-product : dried biji : wheat flour). Based on the growth performance, feed conversion efficiency was slightly lower than control group, but the protein content in feed extrudate increased to a large extent compared to that mixed with wet biji.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.339-348
• /
• 2000

This study was conducted to investigate the distribution pattern of plants on the streamside of Goggyochun, and to survey the distribution of heavy metal-contaminated soils and plants. A total of 11 survey sites were selected along the Goggyochun during the period of between June and September 1999. The wet land plants were composed of 44 species. The most frequently occurring species in the study sites were Rumex crispus, Persicaria hydropiper, Cyperus amuricus and Setaria viridis, and among them the Humulus japonicus, Erigeron canadensis and Phragnites communis species were dominants of the community. Analysis of soil properties showed that organic matter and clay contents were higher in the upstream region while sand content was higher in the downstream region. The pH and the organic matter contents of soils were at range of 6.70-9.94 and 2.39-15.16% respectively. The average contents of Pb and Cd in soils were 11.96mg/kg and 1.64mg/kg respectively, and these values were higher as compared with those of ordinary soil in Korea. The average contents of Zn and Pb in Persicaria hydropiper were 8.30mg/kg and 7.38mg/kg respectively, and these values were higher than other plants. The distribution of heavy metals in plants varied in accordance with the species regardless of the sites.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.1
• /
• pp.28-54
• /
• 2020

This study aims to investigate the food preservation methods adopted by the Joseon Dynasty, which existed before the 17^th century. A total of 232 food preservation methods were discovered in 25 books, and could be classified by their targeted food types: vegetables (84), sea foods (60), meats (41), fruits (37), and others (10). Depending on the preservation method applied, they are classified as food drying, soaking, mud cellar preservation, and other preservation. Food drying is further classified into 8 sub-types: drying, sun-drying, shadow-drying, wind-drying, dry heat, combined drying, smoking, and others. Soaking could be sub-divided into using salt, ash, dry sand, bran, fermented paste, wet distillers grains, oil, and others. Mud cellar preservation is sub-classified into installing shelf inside the mud cellar, making the mud cellar for food preservation, and making hole or underground tunnel for food preservation. Other food preservation methods include minimizing moisture loss by applying beeswax on a section of the vegetable stem, and cutting the vegetables or fruits with their branches and leaves for food preservation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.348-356
• /
• 2013

Denim washing is processed with different washing techniques such as stone washing, chemical washing, sand washing, and bio washing. Cellulase bio washing can meet environmental regulations that enhance and rectify problems associated with traditional decolorization techniques; however, stone washing needs to be added to the processing because it produces a low decolorization effect. There is also the problem of additional strength reduction. To prevent these problems, a new enzyme for bio washing is required. This study examines the optimum laccase treatment conditions on denim and evaluated the characteristics of laccase-treated denims to establish a database of eco-friendly new decolorization process on denim using a new laccase enzyme. The results show that the optimum conditions of laccase on denim are a pH of 4.0, $30^{\circ}C$, 7% (o.w.f.), and 6 hours in 10 mM of buffer concentration. UV absorbance and HPLC identified isatin coexist with anthranilic acid in solution after laccase treatment on denim. Results of the surface color, the surface morphology and the tensile strength indicate that laccase treatment shows an excellent decolorization effect without fiber damage. The wet cleaning fastness and the perspiration fastness also improved.