• Journal of Periodontal and Implant Science
• /
• 제31권2호
• /
• pp.451-463
• /
• 2001

Following the extensive use of implant, the incidence of peri-implantitis increases. Guided bone regeneration has been used for the optimal treatment of this disease. Because implant surface was contaminated with plaque and calculus, cleaning and detoxification were needed for the reosseointegration when guided bone regeneration was performed. Various mechanical and chemical methods have been used for cleaning and detoxification of implant surface, air-powder abrasive and oversaturated citrate were known to be most effective among these methods. However, these methods were incomplete because these could not thoroughly remove bacteria of implant surface, moreover deformed implant surface. Recent studies for detoxification of the implant surface using laser were going on, $CO_2$ laser and Soft Diode laser were known to be effective among these methods. The purpose of this study was to obtain clinical guide by application these laser to implant surface. 15 experimental machined pure titanium cylinder models were fabricated. The $CO_2$ laser treatment under dry, wet and hydrogen peroxide condition or the Soft Diode laser treatment under Toluidine blue O solution condition was performed on the each of models. Each groups were examined with SPM and SEM to know whether their surface was changed. The results were as follows : 1. Surface roughness and surface form weren't changed when $CO_2$ laser was usedunder dry condition(P>0.05). 2. Surface roughness and surface form weren't changed when $CO_2$ laser was used under wet condition(P>0.05). 3. Surface roughness and surface form weren't changed when $CO_2$ laser was used under hydrogen peroxide condition(P>0.05). 4. Surface roughness and surface form weren't changed when Soft Diode laser was used under toluidine blue O solution condition(P>0.05). From the result of this study, it may be concluded that the $CO_2$ laser having relatively safe pulse mode and the Soft Diode laser used with photosensitizer can be used safely to treat peri-implantitis.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.2300-2305
• /
• 2010

대한민국 대표 축제로 자리 잡은 보령머드축제의 핵심 프로그램인 머드 셀프마사지 행사의 재미와 다양성을 부여하기 위하여, 색상이 함유된 머드에 관한 연구를 수행하였다. 머드 고유의 낮은 명도를 조절하고, 황색계열의 색상발현도를 연구하였던 일차적인 연구를 기반으로 하여, 한국의 전통 색을 근간으로 하는 다양한 색상의 유색머드 개발을 하고자, 무기색소(적색산화철, 울트라마린핑크, 울트라마린블루, 크롬옥사이드 그린)를 첨가하여, 각각의 색상발현도를 색차계, 육안검사, 사용감 등으로 판단하였다. 결정된 색상은 물에 젖음 시 발색정도와 세척상태를 검토하여 보령머드 축제 프로그램인 머드 셀프마사지 행사에 사용하여 축제의 다양성을 높이고, 또한 한국의 전통 색을 나타낼 수 있는 유색머드를 개발하고자 하였다.

• 복식
• /
• 제36권
• /
• pp.219-238
• /
• 1998

For the purpose of this Study, the situation of Korean costume properties in the collection of overseas museums was investigated through correspondence, interviews with their curators and persons in charge and survey. As results were made about the situation of museum science (conservation) and practical utilization of costume properties. So, the study result were drawn as follows : Krean costume properties unexplaind of 'Korean cultural Properties' could be found in the Metropolitan Museum of Art of New York(135 pieces), the Brooklyn Museum of New York(20 pieces), the Newark Museum of New Jersey(15 pieces), and the Victoria Albert Museum of London(100 pieces). Korean costume properties in the collection of over-seas museums mostly fall under the rang of period between the 19th century and the early 20th century and are classified into everyday clothing, wedding costume and armors for the most part. In 1900s, museum in several countries began to collected Korean cultural properties through foreign missionaries or diplomats as well as merchants or travellers in who bought Korean objects. Recently, scholars, traditional Korean costume designerss and diplomatic and consular offices in overseas have donated our Korean costume to many foreign museums. Korean costume properties were largely on display in the dependent display of folklore museums or in a part of exhibition gallery for Asian culture and there were the separate exhibition rooms in museums in the United Kingdom, Germany, Denmark, Austria, Japan and the United States America. But the size and level of display room for Korean cultural properties is one third as large as that for chinese or Japanese cultual properties. It was found in this study that the traditional Korean costume in the collection of overseas museums was largely recorded only as general items rather than given their proper names. The typical example of misnaming included bridal's Kimono for Wonsam(원삼) in the Metropolitan Museum of Art, Yeonroksaek-bumunsajeokori for Dangeui(당의) and Jissan-gryongwonmunsadurumagi for Kongdali(동달이) in the Okura collection of the Tokyo National Museum, and so on. And the Victoria Albert Museum modified the way of wearing Daenim(대님) and the National Museum of Ethnology in Osaka seemed to misplace the ornament of Keanggi(댕기) on Mubok(무복) and Josunjuk(조선족: Chinese-Korean) Museum also misplace hansam(한삼). On the one hand, the Newark museum of New Jersey mixed Chinese armor with the Korean one and the Photohraph of King Kojong(고종) with Chinese one. It is corrected to publish and disseminate the book concering Korean costume in order to inform foreign museums of thed proper names and wearing method of our traditional costumed. The repair of costume before cleaning in the process of conservation treatment can prevent damage likely to occur as the properties of fiber itself are weakened in liquid. It is recommended that western 8-figure stitch and tacking stitch is added to Korean traditional stitching method. Museums in the U.S.A and the U.K are concerned about the aftermath of cleaning it-self, specially conservation treatment may exert on remains and predominantly use the vacuuming method to remove dust or bits of straw before the exhibition beings. But in case of Korea, the dry cleaning and wet cleaning method are used according to the nature and state of a sample costume. This comprehensive cleaning method is gradually developing scientifically but it is expected that those concerned will make a chemical analysis of the solvent to be used and also the more precise test of costume properties will be conducted before cleaning them. A partial study was made here because the scope of study was too broad and vast. It is expected that more studies will be conducted concerning our costume culture under the long-term plan and active support at the government level.

• ETRI Journal
• /
• 제16권1호
• /
• pp.45-57
• /
• 1994

The effects of reactive ion etching (RIE) of $SiO_2$ layer in $CHF_3/C_2F_6$ on the underlying Si surface have been studied by X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometer, Rutherford backscattering spectroscopy, and high resolution transmission electron microscopy. We found that two distinguishable modified layers are formed by RIE : (i) a uniform residue surface layer of 4 nm thickness composed entirely of carbon, fluorine, oxygen, and hydrogen with 9 different kinds of chemical bonds and (ii) a contaminated silicon layer of about 50 nm thickness with carbon and fluorine atoms without any observable crystalline defects. To search the removal condition of the silicon surface residue, we monitored the changes of surface compositions for the etched silicon after various post treatments as rapid thermal anneal, $O_2$, $NF_3$, $SF_6$, and $Cl_2$ plasma treatments. XPS analysis revealed that $NF_3$ treatment is most effective. With 10 seconds exposure to $NF_3$ plasma, the fluorocarbon residue film decomposes. The remained fluorine completely disappears after the following wet cleaning.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.86-86
• /
• 2010

Micro- and nanoscale texturing and control of surface energy have been considered for superhydrophobicity on polymer and silicon. However these surfaces have been reported to be difficult to meet the robustness and transparency requirements for further applications, from self cleaning windows to biochip technology. Here we provided a novel method to fabricate a nearly superhydrophobic soda-lime glass using two-step method. The first step involved wet etching process to fabricate micro-sale patterns on soda-lime glass. The second step involved application of $SiO_x$-incorporated DLC to generate high intrinsic contact angle on the surface using chemical vapor deposition (CVD) process. To investigate the effect of surface roughness, we used both positive and negative micro-scale patterns on soda-limeglass, which is relatively hard for surface texturing in comparison to quartz or Pyrex glasses due to the presence of impurities, but cheaper. For all samples we tested the static wetting angle and transparency before and after 100 cycles of wear test using woolen steel. The surface morphology is observed using optical and scanning electron microscope (SEM). The results shows that negative patterns had a greater wear resistance while the hydrophobicity was best achieved using positive patterns having static contact angle up to 140 deg. with about 80% transparency. The overall experiment shows that positive patterns at etching time of 1 min shows the optimum transparency and hydrophobicity. The optimization of micro-scale pattern to achieve a robust, transparent, superhydrophobic soda-lime glass will be further investigated in the future works.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.532-537
• /
• 1998

본 연구는 반도체 공정중 습식세정시 사용되는 초순수내에서의 오존의 거동과 오존이 주입된 초순수와 실리콘 웨이퍼와의 반응성에 대해 연구하였다. 초순수내 오존의 용해도는 주입되는 오존의 농도와 초순수의 온도가 낮을수록 증가하였고 주입되는 오존의 농도에 정비례하여 증가하였다. 초순수내 오존의 반감기는 초순수내 오존의 용해농도와 초순수의온도가 낮을수록 증가함을 나타내었고 반응차수는 약 1.5로 계산되었다. 초순수의산화환원전위(redox potential)값은 오존 주입시 5분 이내에 포화되어 일정한 값을 나타내었고 주입되는 오존의 농도가 증가함에 따라 약간 증가하였다. HF처리된 실리콘 웨이퍼는 오존이 2ppm 이상 용해된 초순수에서 세정하였을 때 1분 이내에 접촉각이 $10^{\circ}$미만의 친수성 표면을 형성하였고 piranha 세정액($H_2SO_4$과 $H_2O_2$의 혼합액)에 의해 형성된 자연산화막보다 오존이 주입된 초순수에 의해 형성된 산화막이 약간 더 두꺼움을 Spectroscopic Ellip-someter에 의해 관찰하였다. 오존의 농도가 1.5ppm에서 90초내에 계면활성제로 오염된 실리콘 웨이퍼를 piranha용액과 오존이 함유된 황산 그리고 오존이 함유된 초순수에서 세정시 오존이 함유된 초순수가 가장 탁월한 오염제거능력을 나타내었다.

• 헤리티지:역사와 과학
• /
• 제53권2호
• /
• pp.222-241
• /
• 2020

조선왕릉 태릉은 중종의 계비인 문정황후의 무덤으로 다양한 종류의 석조물(석물 24기, 봉분석재 144개)이 배치되어 있다. 이 석조물은 모두 중조립질의 흑운모화강암을 사용하여 제작하였다. 석조물의 주요 손상양상은 물리적 손상과 생물오염으로 확인되며 이 중에서 박리박락(145기), 입상분해(138기), 보수물질(156기)과 함께 생물오염인 조류(154기), 지의류(165기), 선태류(97기)가 높은 발생빈도를 보인다. 특히 생물학적 손상(조류)이 가장 심각한 상태(3등급 이상이 전체 석물의 94%)로 즉각적인 보존처리가 요구되며 부분적으로는 박리박락과 입상분해 등도 중장기적인 보존관리가 필요할 것으로 판단된다. 에코팁 경도와 초음파탐사 결과, 석재의 약 70%이상이 물성이 상당히 취약한 것으로 나타났다. 초분광 분석에서도 봉분석재 표면의 80% 이상에서 생물이 서식하는 것으로 분석되었으며 이 부분에는 P(인), S(황), Cl(염소), Ca(칼슘)이 높게 검출되었다. 이는 태릉이 수백 년 동안 야외에 위치하고 있어 물리적, 화학적 및 생물학적 요인 등에 의해 풍화작용을 받아 왔기 때문이다. 따라서 태릉 석조물 중 물리적 풍화등급이 높은 석물은 물성을 보강하기 위해 강화처리가 필요한 것으로 판단되며 생물은 석재의 손상을 유발할 수 있는 가능성이 높기 때문에 건식 및 습식 세정으로 제거해야 한다. 또한 보존처리 이후 생물의 재발생을 지연하기 위해서는 봉분에 흘러내린 토사를 정기적으로 정리해줄 필요가 있고 장기적으로 보존상태에 대한 모니터링이 필요하다.