• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.39-44
• /
• 2009

Geothermal energy is the heat contained in the earth and its internal fluids. Geothermal energy is stored as sensible or latent heat. Supplied by both internal and external sources, it represents a vast supply which is only started to be tapped for generation of electric power. In general, this is natural dry or wet medium to high enthalpy steam at temperatures above $150^{\circ}C$. For some time, binary systems employing substances with a lower boiling point than water in a secondary circuit have been used to generate vapor for driving turbines at a lower temperature level. The utilization of binary plants and the possibility of production from enhanced geothermal systems can expand its availability on a worldwide basis. The geothermal electricity installed capacity is approaching the 10,000GW threshold. Geothermal energy is not present everywhere, but its baseload capability is a very important factor for its success.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.440-447
• /
• 2000

The effects of DP finishing conditions including process technique and finishing agent on the mechanical properties and hand of cotton fabrics were investigated. 100% cotton fabrics were treated with NMA/DMDHEU and NMA/YF using wet-fixation and steam-fixation process. For comparison, conventional pad-dry-cure process was used with DMDHEU. After DP finishing, tensile and compressional resilience increased and bending hysteresis decreased, resulting in the improvement of dimensional stability of cotton fabric. WF and SF process rendered fabrics better shear properties, tensile energy, and compressional linearity and energy than PDC process. However, SF process produced fabrics with higher geometrical roughness than WF process. After DP finishing, primary hand values except Koshi increased, resulting in the increase of total hand value of cotton fabric.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.7
• /
• pp.1005-1010
• /
• 2010

This study was carried out to investigate the steaming and wet grinding conditions to save effective compositions and to utilize whole roots of ginseng. The sweetness at the 3 different steaming conditions of non steaming group (A), $95^{\circ}C$/3 hr group (B) and $121^{\circ}C$/15 min group (C) resulted in 7.7, 10.7 and $11.2^{\circ}Brix$, and the browning intensity of 0.37, 1.97 and 1.50, respectively. The contents of crude saponin at the different steam heat treatments were 7.19 (A), 6.99 (B) and 8.83 mg/g (C). When sensory evaluation was conducted, the ginseng products processed at C condition showed the highest scores in the evaluation categories of bitter taste reduction, sweetness and overall acceptance. These results suggest that sensory characteristics of ginseng could be enhanced by the steam heat treatments. When the wet grinding with water addition volume to the steamed ginseng treated at $121^{\circ}C$ for 15 min was also investigated, the smallest particle size resulted from the water addition volume of 300%. The grinding efficiency of ginseng was found to be high at 30 min of grinding time and 3 times of grinding frequency with the mean particle size of $67.66\;{\mu}m$. The content of effective component did not show significant differences by grinding time and grinding frequency. Based on the results, the steam heat treatments ($121^{\circ}C$/15 min) and wet grinding procedures were found to be effective in utilizing whole roots and saving the effective compositions of ginseng.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.10 no.1
• /
• pp.96-99
• /
• 2014

The aim of the study was to evaluate the water treatment of pressurized water reactor secondary side by the mixed amine of ammonia and ethanolamine, from the standpoint of corrosion control, as compared with all volatile treatment of ammonia. The pressurized water reactor systems have switched a secondary side pH control agent to minimize the corrosion in the moisture separator/reheater and feedwater heater systems and the transport of corrosion products into steam generator. As results of field test, pH was increased in the steam generator and the wet steam area of moisture separator/reheater and the concentration of Fe were decreased by more than 50% as compared with water treatment of ammonia.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.11
• /
• pp.911-917
• /
• 2008

It was found that more than 60% of the steam turbine blade damages occurred under the condition alternatively repeated wet and dry of vapor and condensed vapor at the lower pressure stage. And also, it has been well known that both the mechanical properties and environmental strength of the steam turbine blade can be changed by the crystal structure. However, in spite of these common facts, it is difficult to find out the quantitative results including the particular environmental condition as well as the actual service conditions. In this study, as a fundamental investigation to provide design information and reliability evaluation of the 12Cr alloy steel used for a steam turbine blade, stress corrosion strength of the 12Cr alloy steel of which its crystal structure is different was assessed under $2.5{\sim}3.5wt.%$ NaCl solution at 90oC. From the results, S-t curves for predicting damage life and design criterion of the 12Cr alloy steel including corrosion environment as well as S.C.C. condition were obtained.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.9-16
• /
• 2015

This study was carried out to investigate the effect of delignification on properties of lignocellulose nanofibers (LCNFs) prepared by wet disk-milling (WDM) after steam and ozone oxidation pre-treatments and their nanopaper sheets. Delignification treatment was effective to obtain fine morphology with uniform fiber diameter less than 35 nm without aggregation, and increased the specific surface area (SSA) and filtration time of LCNFs. In particular, SSA and filtration time of the LCNFs prepared by WDM after ozone pretreatment increased 1.5 and 5.4 times after further delignification. Delignification also increased whiteness and decreased the redness of nanopaper sheets. The highest color difference (41.9) before and after the delignification was obtained in LCNFs prepared by WDM after the steam pretreatment. Tensile properties of nanopaper sheets were also increased by further delignification. The highest tensile strength was found to be 142 MPa.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.504-510
• /
• 2004

Two experiments were conducted. In expt. 1, a total of fifty-four pigs (L$\times$Y$\times$D, 56.14$\pm$1.7 kg) were used for a feeding trial to determine the effect of wet feeding of a commercial-type diet without food waste (FW). Treatments were dry (Control), wet (WF) and wet+dry feeding (WDF). For wet feeding, the diet was mixed with water at a ratio of 1:2.5 (feed:water). A wet feed was given during the whole experimental period for the WF group, but the dry feed was given during the finisher period for the WDF group. In expt. 2, a total of fifty-four pigs(L$\times$Y$\times$D, 55.7$\pm$1.8 kg) were used for a feeding trial to determine the effect of wet feeding of FW. Treatments were a commercial-type dry (Control), wet fermented food waste (WFFW) and WFFW+dry feeding (WFFW+DF). For wet feeding of fermented food waste, however, some ingredients (concentrate) were added to make nutrient contents comparable to the control diet. The FW collected was ground ($\leq$5 mm), heated with a steam jacket (140$\pm$3$^{\circ}C$) and fermented with probiotics for one day in a steel container at 30-40$^{\circ}C$. For the WFFW group, the wet feed was given during the whole experimental period, but a dry feed was given during finisher period for the WFFW+DF group. In expt. 1, during the grower period, pigs fed wet feed showed higher average daily gain (ADG) and feed conversion ratio (FCR) than those fed only dry feed (p<0.05). During the finisher period, pigs in the WDF group showed better ADG and FCR than the control group. During the entire experimental period, pigs in the WDF group grew faster (p<0.05) than those in the control group, and the same trend was found in FCR. Also, dressing percentage, backfat thickness, lean %, and pork color were not affected by the wet feeding of diets in this study. In expt. 2, during the grower period, pigs fed diets containing FW showed lower (p<0.05) ADG than those fed the control diet. But FCR was better (p<0.05) in pigs fed FW than in the control group. During the finisher period, pigs in the WFFW+DF group grew faster (p<0.05) than those in the control and WFFW groups. During the entire experimental period, pigs fed the control diet showed better ADG (p<0.05) than those fed FW, but feed intake and FCR were vice versa. Dressing percentage was lower (p<0.05) in the WFFW than in the control group, but backfat was thinner in the WFFW group than in the control group. In summary, it can be concluded that wet feeding of formula feed can improve daily gain, however, feeding fermented wet food waste may reduce daily gain of finishing pigs, even though it was fermented and the nutrient was fortified with concentrates. In addition, dry feeding of a formula feed during the finishing period can improve daily gain in pigs fed a wet feed with or without food waste during the grower period.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.4
• /
• pp.54-62
• /
• 2009

The feedwater heaters are Critical components in a nuclear power plant. As the operation years of heaters go by, the maintenance costs required for continuous operation increase. When the carbon steel components in nuclear make contact with running fluid, the wall thinning caused by FAC (flow accelerated corrosion) can be generated. Local wall thinning is inevitable at the area around wet steam entrance to be attacked due to the long term operation. Sometimes the shell with thinned wall is eventually ruptured. To identify the relationship between the local wall thinning and fluid behavior of the feedwater heater, the practical data of a plant, which were based on ultrasonic thickness measurement tests, were analyzed and CFD(Computed Fluid Dynamics) analyses were performed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.615-616
• /
• 2006

A micro-fuel processor system integrating steam reformer and partial oxidation reactor was manufactured using low temperature cofired ceramic (LTCC). A CuO/ZnO/$Al_2O_3$ catalyst and Pt-based catalyst prepared by wet impregnation were used for steam reforming and partial oxidation, respectively. The performance of the LTCC micro-fuel processor was measured at various operating conditions such as the effect of the feed flow rate, the ratio of $H_2O/CH_3OH$, and the operating temperature on the LTCC reformer and CO clean-up system. The catalyst layer was loaded with "Fill and Dry" coating for small volume. The product gas was composed of $70\sim75%$ hydrogen, $20\sim25%$ carbon dioxide, and $1\sim2%$ carbon monoxide at $250\sim300^{\circ}C$, respectively.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.1
• /
• pp.1-11
• /
• 2015

Feedwater Heaters are important components in a nuclear power plant. As the age of heater increases, the maintenance cost required for continuous operation also increases. Most heaters have the carbon steel shells, tube support plates and flow baffles. The carbon steel is susceptible to flow-accelerated corrosion. This is especially true if the flow has a two-phase mixture of steam and condensate. The wall thinning around the wet steam entrance area of the shell is inevitable during some long term operation. The structural integrity of the feedwater heater shell affects the safe operation of the nuclear power plant. Therefore, it is needed for the thinned shell to be repaired. The maintenance method for preventing failure of the shell should be determined by investigating various factors including the stress distribution of thinned area. The stress analysis of the shell including the steam entrance region is studied in this paper. The results of thinned shell is compared with that of intact shell.