• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제56권3호
• /
• pp.223-229
• /
• 2020

We analyzed the cutting mechanism of laver harvesting machine in the sea area near Gooam Port in Goheung, Jeollanam-do, and investigated the change and efficiency of laver collecting operation in the working ship. The laver working ship slides uniformly from the bow to the upper part of the laver collecting machine on the deck and cuts the wet laver attached to the bottom of the net at the blade of the havesting machine. The laver farming net, which was loaded with laver turrets on the deck by gravity and collected primitives, consisted of a ship structure that led to the stern side and into the sea. The working ship operation is in harvesting process while driving in a S-shape that is separated by one space to efficiently collect the laver net. During laver working ship operation, the speed was 0.51 m/s in the access stage, 0.56 m/s in the havesting stage, and 0.52 m/s in the exit stage. Considering the cutting edge life and production efficiency of the laver harvesting machine, it is appropriate to harvest 1.15 to 1.26 kg/rpm by operating at a rotational speed of about 700 to 800 rpm rather than forcibly harvesting the product at high speed. On the deck of the working ship, 959.7 kg of starboard and 1048.7 kg of center were 964.7 kg of port side. Based on the starboard, 9.3% of the central part and 0.5% of the port side appeared. The reason for this was due to the difference in harvest time according to the turning direction of the working ship.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제22권4호
• /
• pp.339-347
• /
• 2004

This study aims at calculating the exact soil conversion factor of cutting and banking areas of weathering rocks in large-scaled construction sites where land is being developed into home lots. For this, we have excavated the respective 20 sites of the cutting and banking areas in the said site and then calculated the volume after the excavation. As a result, the relative accuracy of the difference was calculated at 0.5% in average. We have calculated the exact soil conversion factor by the use of function ratio as per the wet unit weight and the indoor soil quality test as per volume calculated. And then we have found out minor differences as a result of the comparison and analysis with soil conversion factor determined by the dry unit weight test as per sand replacement method. This may be judged as a rational design method for the calculation of soil conversion factor, as well as high reliability of site test as a precision photogrammetry is adopted for volume measurement of the irregular excavating areas.

• Journal of Korean Society of Forest Science
• /
• 제86권4호
• /
• pp.422-429
• /
• 1997

This study was conducted to maintain the productivity of forest production and byproducts production of natural forest. Distribution of wild edible herb species and correlations between wild edible herb species and forest-type, and site factors were surveyed on national forest in Changjeon-ni, Pyungchang-gun, Kang-won-do. Ligularia fischeri was distributed mainly on cutting sites or meadow or Quercus mongolica forest, Pimpinella brachycarpa did on broadleaved mixed forest, and Synurus deltoides did cutting sites or meadow. On conifer plantations major wild edible herb species were not distributed. Pimpinella brachycarpa and Ligularia fischera were distributed mainly on the site of wet soil-moisture condition, Codonopsis lanceolata, Saussurea grandifolia and Synurus deltoides were distributed randomly. The distribution of Ligularia fischeri and Pimpinella brachycarpa were significantly different between slope directions, but those of Codonopsis lanceolata, Saussurea grandifolia and Synurus deltoides were not significant. Ligularia fischeri and Pimpinella brachycarpa were distributed more frequently in north directed slope than the other. Highly positive correlations were proved Ligularia fischeri and Pimpinella brachycarpa, Aconitum jaluense and Veratrum patulum; Pimpinella brachycarpa and Smilacina japonica, Aconitum jaluense and Veratrum patulum.

• Journal of the Korea Institute of Building Construction
• /
• 제1권2호
• /
• pp.185-190
• /
• 2001

The purpose of this study is the development of practical Dry floor tile unit method that settle the defect of a wet method and designed for resin mat. With use of PE resin which is confirmed the basic property, it is developed that resin mat, joint-sealing compound with fixed form and space management to Dry floor tile unit method. The result of this study is below. 1) To acquire above the 4kgf/$\textrm{cm}^2$ - construction specification criterion, the bonding space that between resin mat and tile has to occupy the 50% of resin mat module space(10,000$\textrm{cm}^2$). 2) Criteria of bonding part plane is below. simpleness of metal form. productivity, uniform quality after injection molding cooling, easy cutting for remain space management, adhesive property, construction ability, transformation of a severed piece under pressure and so on. 3) To get the shape that could protect the interfacial breakdown, it is designed that resin mat and tile are unified after the bond input. 4) Adapted joint-sealing compound is the material of urethane kinds wedge form. Resin mat has the water passageway that could drain the water. 5) To manage the severed piece of tile, the resin mat is likely to divide the half and the quarter and the plastic drainage is developed in the severed piece.

• Journal of Powder Materials
• /
• 제16권1호
• /
• pp.43-49
• /
• 2009

Titanium carbides are widely used for cutting tools and grinding wheels, because of their superior physical properties such as high melting temperature, high hardness, high wear resistance, good thermal conductivity and excellent thermal shock resistance. The common synthesizing method for the titanium carbide powders is carbo-thermal reduction from the mixtures of titanium oxide($TiO_2$) and carbon black. The purpose of the present research is to fabricate nano TiC powders using titanium salt and titanium hydride by the mechanochemical process(MCP). The initial elements used in this experiment are liquid $TiCl_4$(99.9%), $TiH_2$(99.9%) and active carbon(<$32{\mu}m$, 99.9%). Mg powders were added to the $TiCl_4$ solution in order to induce the reaction with Cl-. The weight ratios of the carbon and Mg powders were theoretically calculated. The TiC and $MgCl_2$ powders were milled in the planetary milling jar for 10 hours. The 40 nm TiC powders were fabricated by wet milling for 4 hours from the $TiCl_4$+C+Mg solution, and 300 nm TiC particles were obtained by using titanium hydride.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.644-647
• /
• 2001

Amorphous As-Ge-Se-S thin films have been studied with the aim of identifying optimum etching condition which can be used to produce holographic grating structure for use as diffractive optical elements. In this study, holographic gratings have been formed using He-Ne laser(632.8nm), and fabricated by the method of wet etching using NaOH etchant with various concentration(0.26N, 0.33N, 0.40N). The diffraction efficiency was obtained by +1st order intensity of the diffracted beam. The formed grating profiles were observed by atomic force microscope and showed that the expected grating profile could be achieved by controlling the etching time. Over-etching resulted in under-cutting of the grating lines. The highest 1st order diffraction efficiency for these gratings was about 5.05%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제14권5호
• /
• pp.15-21
• /
• 2015

The glass used for Mobile Camera Window is required to have high strength. Cell type manufacturing by means of CNC is widely used for camera window. Individual loading and unloading is needed for each process, such as painting and PVD, in cell type manufacturing. The purpose of this study is to search the enhanced manufacturing process with sheet type throughout bulk unit production in painting and PVD. This study includes sheet type manufacturing processes such as laser cutting, wet etching, 2nd tempering, printing, and AF/AR coating.

• Journal of the Korean Society of Food Culture
• /
• 제35권1호
• /
• pp.28-54
• /
• 2020

This study aims to investigate the food preservation methods adopted by the Joseon Dynasty, which existed before the 17^th century. A total of 232 food preservation methods were discovered in 25 books, and could be classified by their targeted food types: vegetables (84), sea foods (60), meats (41), fruits (37), and others (10). Depending on the preservation method applied, they are classified as food drying, soaking, mud cellar preservation, and other preservation. Food drying is further classified into 8 sub-types: drying, sun-drying, shadow-drying, wind-drying, dry heat, combined drying, smoking, and others. Soaking could be sub-divided into using salt, ash, dry sand, bran, fermented paste, wet distillers grains, oil, and others. Mud cellar preservation is sub-classified into installing shelf inside the mud cellar, making the mud cellar for food preservation, and making hole or underground tunnel for food preservation. Other food preservation methods include minimizing moisture loss by applying beeswax on a section of the vegetable stem, and cutting the vegetables or fruits with their branches and leaves for food preservation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권5호
• /
• pp.483-493
• /
• 1996

Advances in silage technology, including precision chop forage harvesters, improved silos, polyethylene sheeting, shear cutting silo unloaders, and the introduction of total mixed rations, have made silage the principal method of forage preservation. A better understanding of the biochemistry and microbiology of the four phases of the ensiling process has also led to the development of numerous silage additives. Although acids and acid salts still are used to ensile low-DM forages in wet climates, bacterial inoculants have become the most widely used silage additives in the past decade. Commercial inoculants can assure a rapid and efficient fermentation phase; however, in the future, these products also must contribute to other areas of silage management, including the inhibition of enterobacteria, clostridia, and yeasts and molds. Nonprotein nitrogen additives have the problems of handling, application, and reduced preservation efficiency, which have limited their wide spread use. Aerobic deterioration in the feedout phase continues to be a serious problem, especially in high-DM silages. The introduction of competitive strains of propionic acid-producing bacteria, which could assure aerobically stable silages, would improve most commercial additives. New technologies are needed that would allow the farmer to assess the chemical and microbial status of the silage crop on a given day and then use the appropriate additive(s).

• Magazine of the Korean Society of Agricultural Engineers
• /
• 제23권1호
• /
• pp.86-102
• /
• 1981

The soil test data of 28 earth dams, scheduled to be constructed in Kore3, were selected for this study. The safety factors of their side slops were computed using Fellenius' "slice Method" by computer. The results summarized in this study are as follows; 1. Dam sections can be easily determined by fig.10 without a time consuming trial and error calculations of assumed sections. 2. For the economical design of earth dam sections, it was found that more cohesive soil was suitable for lower dams(dam height less than 25m) and soils with a higher friction angle was better for higher dams 3. In the case that used soil materials have the same Internal friction angle, side slope increase was almost same. 4. The relationship between side slope and friction angle was found as log.S=a tan ø+b (Fig. 7) 5. The relationship between side slope and cohesion (c) was also found as log. S=a c+b (Fig. 8) 6. The change of safety factors due to the change of central core materials was very little (Table-2) 7. The decrease of safety factors according to the unit weight increase of embankment materials was negligible. 8. In general the relationship between the wet unit weight and the saturated unit weight was r sat = (rt)$^2$+0. 140. This study will contribute to the determination of economic and safe planning and designing of earth dams, embankments and cutting side slopes.