• Applied Biological Chemistry
• /
• 제14권2호
• /
• pp.165-169
• /
• 1971

Slushed ice와 dry chilling chamber에 각각 도계 직후 냉장한 12주생 영계의 가슴 및 다리 근육으로부터 KCl-phosphate buffer를 사용하여 도계후 $1{\sim}25$시간 사이에 함질소물을 추출했다. Extractable nitrogen의 변화는 주로 myosin의 extractability 감소, 그리고 어느정도 actomyosin의 extractability 증가 결과로 일어남이 밝혀졌으며, 한편 stroma. sarcoplasmic protein 및 비단백함질소물(none protein nitrogen)의 변화는 적었다. Myosin extractability는 도계후 처음 3시간 동안에 급격히 감소하여 그후 계속적으로 wet chilling 동안 감소했으나 dry chilling의 경우 myosin extractability의 감소는 가슴근육보다 다리근육에서 더 많았으며 extractability는 도계 17시간 후부터 증가했다. Actomyosin은 wet chilling의 경우 계속적으로 소량밖에 추출되지 않았으나 dry chilling의 경우 도계후 17시간 이후부터 증가했는데, 이런 경향은 breast muscle과 leg muscle이 동일했다.

• 대한치과보철학회지
• /
• 제41권6호
• /
• pp.732-746
• /
• 2003

Statement of problem. Soft lining materials, also referred to as tissue conditioning materials, tissue heating materials, relining materials, soft liners or tissue conditioners, were first introduced to dentistry by a plastic manufacturer in 1959. Since the introduction of the materials to the dental field, their material properties have been continually improved through the effort of many researchers. Soft lining materials have become widely accepted, particularly by prosthodontists, because of their numerous clinical advantages and ease of manipulation. Unfortunately, few reports have been issued upon the topic of increasing the bond strength between the base metal alloy used in cast denture bases and PMMA soft liner modified with 4-META, nor upon the pattern of debonding and material change in wet environment like a intra oral situation. Purpose. The purposes of this study were comparing the bond strength between base metal alloy used for the cast denture bases and PMMA soft liner modified with 4-META, and describing the pattern of debonding and material property change in wet environment like the intraoral situation. Material and Methods. This study consisted of four experiments: 1. The in vitro measurement of shear bond strength of the adhesive soft liner. 2. The in vitro measurement of shear bond strength of the adhesive soft liner after 2 weeks of aging. 3. A comparison of debonding patterns. 4. An evaluation the Relation time of modified soft liner. The soft liner used in this study was commercially available as Coe-soft (GC America.IL.,USA), which is provided in forms of powder and liquid. This is a PMMA soft liner commonly used in dental clinics. The metal primer used in this study was 4-META containing primer packed in Meta fast denture base resin (Sun Medical Co., Osaka, Japan). The specimens were formed in a single lap joint desist which is useful for evaluating the apparent shear bond strength of adhesively bonded metal plate by tensile loading. Using the $20{\times}20mm$ transparent grid, percent area of adhesive soft liner remaining on the shear area was calculated to classify the debonding patterns. To evaluate the change of the initial flow of the modified adhesive soft liner, the gelation time was measured with an oscillating rheometer (Haake RS150W/ TC50, Haake Co., Germany). It was a stress control and parallel plate type with the diameter of 35mm. Conclusion. Within the conditions and limitations of this study, the following conclusions were drawn as follows. 1. There was significant increase of bond strength in the 5% 4-META, 10% 4-META containing groups and in the primer coated groups versus the control group(P<0.05). 2. After 2 weeks of aging, no significant increase in bond strength was found except for the group containing 10% 4-META (P<0.05). 3. The gelation times of the modified soft liner were 9.3 minutes for the 5% 4-META containing liner and 11.5 minutes for the 10% 4-META liner. 4. The debonding patterns of the 4-META containing group after 2 weeks of aging were similar to those of immediaely after preparation, but the debonding pattern of the primer group showed more adhesive failure after 2 weeks of aging.

• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.993-999
• /
• 2013

This study aimed to measure the amount of sweating on 12 parts of the upper body using absorption fabric and analyze subjective sensations. The study was conducted with 9 male subjects in climate chamber controled at $30{\pm}0.5^{\circ}C$, and $55{\pm}5%$ RH. The result was that sweating amount of the upper back part was significantly more than upper front part. We assumed that forced convection flow cased by exercise decreased the sweating rate in the front. The skin temperature of upper front body rapidly decreased as soon as exercise starts and gradually increased with cessation of exercise. On the other hand, the skin temperature of palm increased with exercise and showed continuous increasing even exercise stopping all the experimental period. This is caused by thermoregulatory responses through vasodilatation on the peripheral area. Subjective sensations, such as thermal sensation, wet sensation, and thermal comfort showed the highest score at the time of exercise stop. This means the subjects felt more hot, wet, and uncomfortable after exercise stopped. Bur after wiping of sweat, subjective sensation scores were recovered rapidly. The present study has provided more detailed information on the upper body sweat distribution than previously available, which can be used in clothing design, thermo-physiological modeling, and thermal manikin design. We also think that results of the present study will play an important role in making the sweat distribution map.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.530-537
• /
• 2008

This paper describes the results of a study on the tracking performance of outdoor insulating materials based on the rotating wheel dip test(RWDT). And, the influence of surface degradation was evaluated through such as measurement of the flashover voltage after and before tracking test, also aspects of surface degradation using scanning electron microscopy. The time to tracking breakdown of treated filled specimen is longer than untreated filled specimen. And, after the RWDT, the surface of specimen by adding untreated filler appeared heavy erosion. It was found that the addition to surface treated filler, the better tracking resistance. In the RWDT, the breakdown specimen is not affected by the dry flashover voltage, despite the fact that the surface degradation of tracking test has different state on each specimen. This suggests that wet flashover voltage play an important role in evaluating of tracking and erosion on the surface degradation in tracking test. And, the flashover voltage of specimen under wet conditions are greatly affected by the salt concentration and degree of degradation by the RWDT Because of hydrophobicity and degree of degradation by the RWDT, the flashover voltage of treated filled specimen is higher than that of untreated filled specimen. Different types of specimen may have different hydrophobicity and their surface state under contaminated conditions may not be the same.

• 자원리싸이클링
• /
• 제15권3호
• /
• pp.46-57
• /
• 2006

본 연구는 불순물을 포함하는 인산부생석고로부터 정제석고를 얻을 목적으로 수행되었다. 인산부생석고를 일정조건에서 탈수하고 수화시켜 석고성분만을 선택적으로 미립화 시킨 다음 325mesh로 습식사분하여 사하산물로 정제석고를 얻었다. 이 과정에서 석고의 회수율에 미치는 탈수온도, 탈수시간, 탈수율, aging시간, 수화농도, 수화온도, 초음파조사시간, 첨가제 등의 영향을 조사하였다. 실험결과, 인산부생석고를 $140^{\circ}C$에서 6시간 동안 건조하여 완전히 무수석고 상태가 되도록 탈수 한 다음, 슬러리 농도 $3{\sim}10%,\;20{\sim}30^{\circ}C$의 수화온도, 수화시간 2시간의 조건에서 수화하여 사분하면 석고회수율이 95% 이상이 됨을 알았다. 회수된 석고의 품위는 회수율이 높을수록 높아지는 경향을 보였으며 회수율이 90%이상 일 때 품위는 $94{\sim}96%$를 보였다. 이 밖에도 석고회수율을 높이기 위해서는 탈수된 석고가 공기와 접촉하는 시간이 16시간을 넘어서는 아니 되며, 구연산나트륨을 0.005M 정도 첨가하는 것과, 수화반응 초기에 $5{\sim}10$분 동안 초음파를 조사하는 것이 매우 유용한 수단임을 알았다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제2권5호
• /
• pp.591-600
• /
• 1998

We have examined 24 human aortas aged $46{\sim}90$ years obtained from autopsies. Most exhibited gross lesions of some degree on the lumenal surface. Using hot alkaline treatment (0.1 N NaOH) at $70{\sim}75^{\circ}C$ for 5 hours, we extracted and quantitated elastin portions from the aortic wall in 3 different segments (UTA=upper thoracic aorta, LTA=lower thoracic aorta, AA=abdominal aorta). We have found UTA had $70.6%{\pm}1.39$ (SE), LTA $61.6%{\pm}1.94$ (SE), AA $49.2%{\pm}1.84$ (SE) elastin respectively based on wet weight. The differences between segments are statistically significant (p＜0.05, 0.025). However, there is no significant correlation between the age of the patients and the relative amounts of elastin in each segment. We have also observed the structure of elastin in the internal elastic lamina (IEL) and tunica media (TM) with SEM (scanning electron microscopy), and discovered that the IEL shows various forms of elastolysis- broken sheets, discontinuity, various sizes of lumps, vesicles, and possible newly formed elastin in the aortic lesions (Song and Roach submitted to YMJ). From these studies we conclude that elastin in the aortic wall remains well balanced quantitatively with age in spite of evidence suggesting vigorous degeneration and regeneration in the atherosclerotic lesions.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.539-552
• /
• 2013

To establish an aging management plan considering seawater influx and changes in groundwater within nuclear power plant sites, the characteristics of groundwater flow must be understood. This study investigated the characteristics of groundwater flow within the site and analyzed groundwater level recorded by monitoring wells to evaluate groundwater flow characteristics and elements that affected these characteristics for supplying the information to conduct the appropriate aging management for ensuring the safety of the safety-related structures in Shin Kori Unit 1 and 2. The increase in groundwater level during the wet season results from high sea-level conditions and the large amount of precipitation. As a result of the analysis of groundwater distribution and change characteristics, the site could be divided into a rainfall-affected area and a tide-affected area. First, the rainfall-affected area can further be divided into areas that are affected simultaneously by excavation, backfill, and a permanent dewatering system. Secondly, areas that are not affected by excavation, or the dewatering system, or by structure arrangement and excavation. Analysis of the spectrum for wells affected by tides resulted in confirmation of the M2 component (12.421 hr) and S2 component (12.000 hr) of the semidiurnal tides, and the O1 component (25.819 hr) of the diurnal tides. In the cross-correlation results regarding tides and groundwater levels, the lag time occurred diversely within 1-3 hours by the effect of the well location from sea, the distribution of the backfill material with depth, and the concrete structure.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.299-307
• /
• 2015

Reduction in pollution performance of polymeric insulators, aged due to water absorption stress and thermal stress, is a major threat to the reliable operation of power transmission and distribution system. Formation of partial discharges on the surface of wet polluted insulator plays a major role in determining the life time and pollution performance of outdoor polymeric insulators. However, reports on partial discharge characteristics of water absorption stress aged and thermal aged polymeric insulators are scanty. This paper discusses the pollution performance characteristics of accelerated aged polymeric insulators using the advanced ultra wide band PD signal measurement and analysis. Laboratory experiments on accelerated aged polymeric insulators were carried out as per IEC 60507 under AC voltage, at different humidity and contamination levels using NaCl as a contaminant. PRPD pattern and Time-Frequency map analysis of PD signals were carried out. From the results, it can be speculated that PD analysis is a well suited technique to understand the pollution performance of aged polymeric insulators.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.85-91
• /
• 2002

A research on the performance of retrofit anchors was conducted using adhesives for rehabilitation. From the pull-out tests of the chemical anchors, the effect of the hole diameter, spacer, temperature, moisture, embedment depth, and aging time were investigated. The spacer did not directly increased the pull-out load hilt increased post-yielding resistance therefore the ductility of the retrofit anchors. When the hole was cleaned and dried after the immersion, the pull-out load was greatly increased compared to the wet hole. A design equation was unposed depending on the embedment depth of the anchor bolt.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.42-45
• /
• 1996

A residue from the newsprint waste was investigated as a filler in adhesive for bonding southern pine plywood. The residue was prepared by drying the wet residue to 8% moisture content and grinding the dry material using a laboratory Wiley mitt with a 75-${\mu}m$(200-mesh) screen. The residue was compared to a commercial filler commonly used in structural plywood adhesives. A total of 48 three-ply panels. 12.7mm nominal thickness and 0.3 by 0.3 m in size, were fabricated at two press times(4 and 5 min) and three assembly times(20, 40 and 60 min). Evaluations of the residue were carried out by performance tension shear tests after two 4-hour boil accelerated aging tests on plywood. The test results included tension shear strength and estimated wood failure values. All plywood made with the residue filler were comparable to the control-bonded plywood. These results indicate that residue from the newsprint waste streams would be suitable as filler for plywood adhesives.