• 펄프종이기술
• /
• 제47권6호
• /
• pp.147-153
• /
• 2015

Wet-tissue has been used for baby wipe, cleansing pads, industrial wipes, pain relief, personal hygiene, pet care, and healthcare at home, care facilities, restaurant, and hospital. Raw materials of wet-tissue are mainly natural fibers and synthetic fibers such as cotton, rayon, PET (polyethylene terephthalate) and so on. In this study, electrolytic water of NaCl solution was used as fluid in wet-tissue, and the effect of raw materials on antibacterial rate of wet-tissue was investigated. Rayon (100%) showed an excellent antibacterial rate compared with cotton (100%) and rayon:PET (50:50). Antibacterial rate increased as Cl concentration of electrolytic water increased. Absorption of rayon:PET (50:50) was uneven and antibacterial rate of wet-tissue slightly increased by increase of Cl concentration. Antibacterial rate of wet-tissue was 100% under the conditions of more than 1.5 mL of electrolytic water dosage, and dropped under 50% after storage period of 48 hours.

• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.113-122
• /
• 2010

Two kinds of oxide-dispersion-strengthened (ODS) 316L stainless steel were manufactured using a wet mixing process(wet) and a mechanical alloying method (MA). An MA 316L ODS was prepared by a mixing of metal powder and a mechanical alloying process. A wet 316L ODS was manufactured by a wet mixing with 316L stainless steel powder. A solution of yttrium nitrate was dried after being in the wet 316L ODS alloy. The results showed that carbon and oxygen were effectively reduced during the degassing process before the hydroisostatic process (HIP) in both alloys. It appeared that the effect of HIP treatment on increase in impact energy was pronounced in the MA 316L ODS alloy. The MA 316L ODS alloy showed a higher yield strength and a smaller elongation, when compared to the wet 316L ODS alloy. This seemed to be attributed to the enhancement of bonding between oxide and matrix particles from HIP and to the presence of a finer oxide of about 20 nm from the MA process in the MA 316L ODS alloy.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제21권1호
• /
• pp.145-150
• /
• 2010

The regenerated silk fibroin with various molecular weights (MW) was prepared by different dissolution condition and the effect of coagulant on the wet spinnability of the various MW silk fibroin solutions dissolved in formic acid was investigated by the observation of wet spun filament in coagulant and the measurement of maximum draw ratio. The observation on the wet spun filament in coagulation bath revealed that good fibers without bead were formed in a high MW and a very high MW silk fibroin samples. In contrast, beads were observed in the silk fibroin sample with medium MW. The maximum draw ratio of wet spun silk fibroin filament decreased with MW reduction. The decrease of maximum draw ratio in isopropanol, acetone, DMF and THF was remarkably higher than that in methanol and ethanol, indicating that the coagulant type strongly influenced the wet spinnability. The two simple evaluation methods used in this study showed complementary information for wet spinnability: (a) The observation of filament in coagulant was effective to check a continuous fiber formation and a bead formation, and (b) the maximum draw ratio measurement was useful to examine the post drawing ability related to molecular orientation.

• Applied Biological Chemistry
• /
• 제35권6호
• /
• pp.475-478
• /
• 1992

습식연미 도정조건 및 습식연미 도정쌀의 특성을 구명하기 위하여 일반도정시 강층 제거량별 및 가습량별로 습식연미 도정시험을 실시하였던 바 도정 적정 습식연미 도정조건은 일반도정으로 강층을 95% 제거한 후 5% 가습 연미하는 것이 가장 좋았다. 그리고 습식연미 도정쌀이 일반도정쌀 보다 현백률은 0.75% 낮았으며, 수분함량은 같았으나 백도는 3.5%나 높았고, 윤기가 매우 좋았다. 그리고 쌀을 수세하여 용출된 고형물 및 취반용액 중 용출고형물은 각각 0.30 및 2%, 정도 낮았다. 또한 습식연미 도정쌀의 저장성도 일반도정쌀 보다 좋았다.

• 한국농공학회지
• /
• 제26권3호
• /
• pp.46-58
• /
• 1984

This study was carried out to investigate the compressive strength and the other effects varying to seasons and curing days on the wet curing conditions of the plain concrete. The results obtained are summarized as follows; 1. The longer the wet curing days and the higher the temperature, the greater the compressive strength was expected. 2.。$_2$8, compressive strength of concrete at 28 days under the dry curing conditions showed a range in 64-76% of that under the wet curing conditions. 3. The seasonal variations in the compressive strength under the wet curing showed in order of summer>spring=autumn>winter, and that under the dry curing were in order of spring ≒autumn> summer> winter. 4. In order to obtain 90% of the design compressive strength, 7 days in spring or autumn and 2 weeks of the wet curing in summer were required. 5. The compressive strength of concrete under the wet curing by using wet straw bag cover was almost the same as that of water curing method. 6. Under the wet curing conditions, the higher the temperature, the greater the effect of the curing of concrete was obtained, however, the compressive strength of concrete was decreased under relatively higher (over 15$^{\circ}$ C) and lower temperature (below 4$^{\circ}$C). 7. Freezing damage was occured when temperature was below 0$^{\circ}$ C and humidity was relatively high. 8. A considerable differnce between estimation of $^{\circ}$$_2$8 from $^{\circ}$7 and measured one was appeared in case of the dry curing conditions. Oregon formula was appeared to be acceptable under the wet curing conditions. 9. In relationship between $^{\circ}$$_2$8 and $^{\circ}$7~, $^{\circ}$28=1. 52 $^{\circ}$7 under the wet curing conditions except winter season, and $^{\circ}$$_2$8 =(1.39-1, 48)$^{\circ}$7 under the dry curing conditions were shown.

• 한국산학기술학회논문지
• /
• 제21권7호
• /
• pp.176-183
• /
• 2020

구조함은 수색 및 구조작업을 위하여 크게 세 가지 형태의 잠수체계(Diver Stage Diving, Wet Bell Diving 및 Scuba Diving)를 보유하고 있다. 어떠한 잠수체계를 활용하더라도 잠수요원이 잠수작업 완료 후 상승 시에는 잠수병 예방을 위하여 잠수작업수심 및 잠수 총 시간에 해당하는 감압표에 따라 감압절차를 준수하여야 한다. 감압절차는 크게 수중감압방법과 수중 및 함상감압을 병행하여 수행하는 방법으로 나뉘게 된다. 특히 수중 및 함상감압을 함께 수행하는 방법의 경우 U.S Navy Diving Manual에 따라 수중감압에서 함상감압으로 넘어가는 단계인 Surface Interval이 5분을 초과하지 않아야 한다. 하지만 실선 테스트결과 Wet Bell Diving에서 Surface Interval이 5분을 초과하는 문제점이 발생하였다. 이에 본 논문에서는 모든 가능한 원인을 식별하여 원인분석을 실시하고, 이를 바탕으로 개선된 Wet Bell Diving의 측정결과를 나타내었다. 그 결과 개선된 잠수체계의 실선 테스트에서 Surface Interval이 5분 이내 만족함을 확인하였다. 본 논문의 연구결과는 향후 잠수체계의 운용 및 개선에 유용한 자료로 활용될 것으로 판단된다.

• Environmental Analysis Health and Toxicology
• /
• 제19권4호
• /
• pp.383-388
• /
• 2004

In order to elucidate the relationships between cadmium, copper, mercury, zinc levels and metallothionein in the liver and kidney cortex of Korean, the levels of Cd, Zn, Hg, Cu and metallothionein (MT) were determined in the kidney cortex and liver of 50 subjects deceased in the period of January-November, 2001 in the area of Seoul and Gyeonggi Province of Korea. The mean age of the population studied was 36.3+/-12.3 years. The tissues were digested with microwave digestion system and the elements were determined by inductively coupled plasma atomic emission spectrometry. MT was determined by the Cd-hemoglobin affinity assay. The determined levels (mean+/-SD) were: 33.9+/-18.9 micrograms Cd/g wet weight; 47.5+/-12.6 micrograms Zn/g wet weight; 2.5+/-0.57 microgram Cu/g wet weight; 0.26+/-0.31 micrograms Hg/g wet weight, 4.0+/-3.1 mg MT/g wet weight in renal cortex and 2.5+/-1.9 micrograms Cd/g wet weight; 46.9+/-15.0 micrograms Zn/g wet weight; 6.2+/-2.5 micrograms Cu/g wet weight; 0.10+/-0.15 micrograms Hg/g wet weight, 0.92+/-0.57 mg MT/g wet weight in the liver. Positive relationships between Cd and MT, sum of four divalent metal and MT in the kidney cortex were observed. No other correlation was found between Cu and MT, Hg and MT, Zn and MT in either organs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.150-150
• /
• 2008

본 연구에서는 Wet chemistry damage가 Nanopatterned p-ohmic electrode에 미치는 영향을 연구하였다. Nanopattern은 Metal clustering을 이용하여, P-GaN와 Ohmic형성에 유리한 Pd을 50$\AA$ 적층한 후 Rapid Thermal Annealing방법으로 $850^{\circ}C$, $N_2$분위기에서 3min열처리를 하여 Pd Clustering mask 를 제작하였다. Wet etching은 $85^{\circ}C$, $H_3PO_4$조건에서 시간에 따라 Sample을 Dipping하는 방법으로 시행하였다 Ohmic test를 위해서 Circular - Transmission line Model 방법을 이용하였으며, Atomic Force Microscopy과 Parameter Analyzer로 Nanopatterned GaN surface위에 형성된 Ni/ Au Contact에서의 전기적 분석과, 표면구조분석을 시행하였다. AFM결과 Wet처리시간에 따라서 Etching형상 및 Etch rate이 영향을 받는 것이 확인되었고, Ohmic test에서 Wet chemistry처리에 의한 Tunneling parameter와 Schottky Barrier Height가 크게 증/감함을 관찰하였다. 이러한 결과들은 Wet처리에 의해서 발생된 Defect가 GaN의 표면과 하부에서 발생되며, Deep acceptor trap 및 transfer거동과 밀접한 관련이 있음을 확인 할 수 있었다. 보다 자세한 Transport 및 Wet chemical처리영향에 관한 형성 Mechanism은 후에 I-V-T, I-V, C-V, AFM결과 들을 활용하여 발표할 예정이다.

• 한국수정란이식학회지
• /
• 제3권1호
• /
• pp.13-23
• /
• 1988

These studies were undertaken to examine the interaction of tamoxifen with sex steroid hormones in rat uterine activity. The uterine wet weights of the immature Tat uterus were examined after the administration of estradiol-l7$\beta$(1$\mu$g), tamoxifen(50$\mu$g), progesterone(lmg). The uterotropic activity in immature ovariectomized rats was observed under various treatment conditions following pretreatment with above drugs. The results obtained were as follows:1) Tamoxifen produced significant increase (p <0.01) in uterine wet weight compared with control group, although the increase was not as great as that seen with estradiol-17$\beta$. Administration of estradiol-17$\beta$ together with tamoxifen inhibited significantly the increase of uterine wet weight by estradiol-17$\beta$ (p < 0.01). Coadministration of progresterone with tamoxifen partly blocked the increase of tamoxifen-induced uterine wet weights by progesterone. 2) Estradiol-17$\beta$after the estradiol-17$\beta$ pretreatment discontinued the declining uterine wet weights due to the absence of estrogen support, but uteri continued to increase in weight if daily estradiol-17 $\beta$ was maintained. Administration of tamoxifen on the fourth day of estradiol-17$\beta$ treatment reduced uterine wet weights within 24 hours, and the weights continued to decline with additional tamoxifen. 3) The modest growth of the uterus induced by three daily injections of 5Opg tamoxifen remained stable for five days, with or without additional tamoxifen treatment. Coadministration of tamoxifen with estradiol17$\beta$ increased slightly the increase of uterine wet weight by tamoxifen. Coadministration of tamoxifen with progesterone inhibited the increase of uterine wet weight by tamoxifen. 4) The modest growth of the uterus induced by three daily injections of lmg progesterone reduced uterine wet weight to the control level for five days. Commencement of tamoxifen or estadiol-17 $\beta$ injections on the fourth day of progesterone treatment rapidly elevated uterine wet weight.

• 한국식품영양학회지
• /
• 제31권4호
• /
• pp.511-519
• /
• 2018

The baking properties of rice bread with different percentages of butter and oil in wet and dry rice flour were investigated. The moisture, damaged starch, mean diameter, pasting properties by amylogram and RVA (Rapid Visco Analyzer), as well as thermal properties by DSC (Differential Scanning Calorimetry) of wet and dry rice flour were analyzed. The specific gravity and color (L, a, b) of the dough, as well as the appearance, color (L, a, b) and texture of the rice bread with different percentages of butter and oil in wet and dry rice flour were also analyzed. As a result, the wet rice flour were composed of a noted higher content in moisture, compared to the dry rice flour (p<0.001). The wet rice flour had lower values of damaged starch, higher values of mean diameter and a higher peak viscosity than was noted in the dry rice flour (p<0.001). The wet rice flour showed a higher degree of hydration and gelatinization than was seen in the dry rice flour (p<0.001). The prevailing principle to utilize the replacement of wet rice flour with oil had a significant effect on the volume, specific volume and hardness of the rice bread (p<0.001). The hardness of the rice bread also showed a decreasing trend as the amount of the added oil was increased into the mixture. These results suggest that the replacement of wet rice flour with 5.8% oil is effective for the production of rice bread.