• ETRI Journal
• /
• 제35권2호
• /
• pp.188-192
• /
• 2013

Previous work proposed combining multipulse pulse position modulation (MPPM) with pulse amplitude modulation to form multipulse amplitude and position modulation (MPAPM), which is a hybrid modulation that results in an improvement in bandwidth efficiency but a degradation in power efficiency. In this paper, to achieve greater power efficiency and a better data rate, we propose multipulse dual amplitude-width modulation, based on MPAPM and pulse width modulation. The proposed scheme shows a remarkable improvement in data rate and a 1.5-dB improvement in power efficiency over MPAPM, while sustaining the bandwidth efficiency. After introducing symbol structure, we present the theoretical expressions of spectral efficiency, the power requirements, and the normalized data rate, as well as the results of comparing the proposed modulation to MPPM and MPAPM.

• 무역학회지
• /
• 제46권5호
• /
• pp.31-47
• /
• 2021

Recently, third-party logistics and second-party logistics are well known as a form of logistics service. However, there are several opinions about the effectiveness of second-party logistics and third-party logistics. In this study, the efficiency of second-party logistics companies and third-party logistics companies, which are the main providers of logistics services, was compared and the sales impact on the logistics market was measured. Efficiency was measured using DEA's CCR and BCC models. Debt and equity were used as input variables, and sales, operating profit, and net income were used as output variables. As a result of measuring the efficiency of logistics companies, the efficiency of third-party logistics companies was higher than that of second-party logistics companies in 2019 and 2020, and it had a positive effect on the rate of change in sales.

• 한국입자에어로졸학회지
• /
• 제15권1호
• /
• pp.15-25
• /
• 2019

The influences of corona charging parameters on collection efficiency and surface potential of air filters were investigated. A polypropylene filter medium was electrically charged using a corona charger, and the resulting surface potential and filtration efficiency against neutralized KCl particles were measured. The filter media was charged under different conditions of applied voltage, voltage polarity, charging time, and distance between electrodes. In addition, we considered charging both sides of the filter as well as charging one side of the filter. As a result, electrical force obtained by charged fiber affected filtration efficiency when the apply voltage strength was higher than 7 kV. Negatively charged filter had higher filtration efficiency than positively charged filter while the surface potential of the negatively charged filter was slightly lower than those of positively charged filter. Moreover, the filtration efficiency increased as the charging time of filter fiber increased and the distance between electrodes decreased. The filtration efficiency was more sensitive to changes of charging time than to those of electrode distance, and the efficiency of both sides charged filter was higher than that of single side charged filter.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.81-90
• /
• 2018

Modern investment theory has empirically proved that stock returns can be explained by several factors such as market risk, firm size, and book-to-market ratio. Other unknown factors affecting stock returns are also believed to still exist yet to be found. We believe that one of such factors is the operational efficiency of firms in transforming inputs to outputs, considering the fact that operations is a fundamental and primary function of any type of businesses. To support this belief, this study intends to empirically study the relationship between firm efficiency and stock price performance. Firm efficiency is measured using data envelopment analysis (DEA) with inputs and outputs obtained from financial statements. We employ cross-efficiency evaluation to enhance the discrimination power of DEA with a secondary objective function of aggressive formulation. Using the CAPM-based performance regression model, we test the performance of equally weighted portfolios of different sizes selected based upon DEA cross-efficiency scores along with a buy & hold trading strategy. For the empirical test, we collect financial data of domestic firms listed in KOSPI over the period of 2000~2016 from well-known financial databases. As a result, we find that the porfolios with highly efficient firms included outperform the benchmark market portfolio after controlling for the market risk, which indicates that firm efficiency plays a important role in explaining stock returns.

• 한국항만경제학회지
• /
• 제33권4호
• /
• pp.117-134
• /
• 2017

본 연구는 12개 중국 수리조선 업체를 대상으로 DEA모형을 활용해 중국 수리조선산업의 효율성을 분석하고자 하였다. 기존 연구들과 달리 본 연구에서는 연구대상 뿐만 아니라 선정된 투입과 산출변수도 차별성을 지닌다. 연구대상은 수리조선시장에서 경쟁우위를 보이고 있는 중국의 업체를 대상으로 진행하였다. 효율성 분석을 위한 투입변수는 시설 외에 기술자 수를 고려하였으며, 산출변수는 매출액 외에도 수리선 척수 및 서비스 범위를 사용하여 관련 변수들을 다양화하였다. 분석에는 DEA모형에 의하여 시설만 투입변수로 한 경우 및 시설과 기술자 수를 투입변수로 하여 차이점을 분석하였다. 비효율적인 DMU의 경우, 효율적인 DMU가 될 수 있도록 참조집합을 통해 비효율성의 원인을 찾아 장단점을 분석하였다. 또한 국영기업과 민영기업을 구분해서 개선방안을 도출하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.145-145
• /
• 2011

Light-emitting diodes (LEDs) based on III-nitrides compound semiconductors have achieved a high performance device available for display and illumination sector. However, the conventional c-plane oriented LED structures are still showing several problems given by the quantum confined Stark effect (QCSE) due to the effects of strong piezoelectric and spontaneous polarizations. The QCSE results in spatial separation of electron and hole wavefunctions in quantum wells, thereby decreasing the internal quantum efficiency and red-shifting the emission wavelength. Due to demands for improvement of device performance, nonpolar structure has been attracting attentions, since the quantum wells grown on nonpolar templates are free from the QCSE. However, current device performance for nonpolar LEDs is still lower than those for conventional LEDs. In this study, we discuss the potential possibilities of nonpolar LEDs for commercialization. In this study, we characterized current-light output power relation of the a-plane InGaN/GaN LEDs structures with the variation of quantum well structures. On-wafer electroluminescence measurements were performed with short pulse (10 us) and low duty factor (1 %) conditions applied for eliminating thermal effects. The well and barrier widths, and indium compositions in quantum well structures were changed to analyze the efficiency droop phenomenon.

• 산경연구논집
• /
• 제8권7호
• /
• pp.63-70
• /
• 2017

Purpose - Due to the lack of physical activities and the increase of sedentary behaviors such as screen time, the health condition for contemporaries has been deteriorating. This study is designed to investigate how the use of worktable or tools unfit for body and sedentary behaviors can exercise influence on muscular skeletal disease and how it has an impact on lowering work efficiency and the quality of life with the medium of the muscular skeletal disease. Research design, data, and methodology - The research has developed a questionnaire with 5 hypothesis. The questionnaires were also made by interview and E-mail. 350 copies of questionnaires were distributed and 315 questionnaire were used for the analysis as valid data responses. SPSS ver.22.0 were used and made Cronbach's and reliability test, correlation, Baron & α Kenny 3 step mediated regression analysis. Results - The research has found that living environment factors have positive effect on the occurrence of musculosketal disease. Particularly, repeated use of unfit worktable or tools has a positive effect on the muscular skeletal disorder. And sedentary lifestyle also has a positive effect on the disease. The musculoskeletal disease caused by living environment has a positive impact on lowering the work efficiency. This study has also showed that the muscular skeletal disease has mediated the relationship between the living environment factors and the decrease of work efficiency due to musculoskeletal disease. The musculoskeletal disorders can effect the decrease of the quality of life as well, for the decrease of work efficiency has a positive effect on lowering the quality of life. Conclusions - Sedentary lifestyles, the use of worktable unfit for body, and the repeated use of a tool have caused the increase of muscular-skeletal diseases, and reduction of productivity as well as the hight cost of medical treatment for our contemporaries. Understanding the cause of disease morbidity, finding ways to prevent the disease, and educating people about them would contribute not only to improvement of individual health but also to the advancement of welfare for all.

• Geomechanics and Engineering
• /
• 제16권2호
• /
• pp.195-204
• /
• 2018

Based on theories of rock mechanics, rock fragmentation, mechanics of elasto-plasticity, and energy dissipation etc., a method is presented for evaluating the rock fragmentation efficiency by using plastic energy dissipation ratio as an index. Using the presented method, the fragmentation efficiency of rocks with different strengths (corresponding to soft, intermediately hard and hard ones) under indentation is analyzed and compared. The theoretical and numerical simulation analyses are then combined with experimental results to systematically reveal the fragmentation mechanism of rocks under indentation of indenter. The results indicate that the fragmentation efficiency of rocks is higher when the plastic energy dissipation ratio is lower, and hence the drilling efficiency is higher. For the rocks with higher hardness and brittleness, the plastic energy dissipation ratio of the rocks at crush is lower. For rocks with lower hardness and brittleness (such as sandstone), most of the work done by the indenter to the rocks is transferred to the elastic and plastic energy of the rocks. However, most of such work is transferred to the elastic energy when the hardness and the brittleness of the rocks are higher. The plastic deformation is small and little energy is dissipated for brittle crush, and the elastic energy is mainly transferred to the kinetic energy of the rock fragment. The plastic energy ratio is proved to produce more accurate assessment on the fragmentation efficiency of rocks, and the presented method can provide a theoretical basis for the optimization of drill bit and selection of well drilling as well as for the selection of the rock fragmentation ways.

• Transactions on Electrical and Electronic Materials
• /
• 제6권6호
• /
• pp.276-279
• /
• 2005

Influences of sustain pulse-width on electrical characteristics and luminous efficiency are experimentally investigated for surface discharge of AC-PDP. A square pulse with variable duty ratio and fixed rising time of 300 ns has been used in the experiment. It is found that the memory coefficient is significantly increased at the critical pulse-width. And the wall charges and wall voltages as well as capacitances are experimentally measured by Q- V analysis method along with the voltage margin relation, in terms of the sustain pulse-width in the range of $1{\mu}s$ to $5{\mu}s$ under driving frequency of 10 kHz to 180 kHz. And the luminous efficiency is also experimentally investigated in above range of sustain pulse-width with driving frequency of 10 kHz to 180 kHz. It is noted that the luminous efficiency for 10 kHz and 180 kHz are 1.29 1m/W and 0.68 1m/W respectively, since the power consumption for 10 kHz is much less than that for 180 kHz. It has been concluded that the optimal sustain pulse-width is in the range of $2.5 {\~}4.5{\mu}s$ under driving frequency range of 10 kHz and 60 kHz, and in the range of $1.5 {\~} 2.5{\mu}s$ under driving frequency range of 120 kHz and 180 kHz based on observation of memory coefficient, and wall voltage as well as luminous efficiency.

• 지질공학
• /
• 제31권1호
• /
• pp.19-30
• /
• 2021

본연구에서는 가뭄이 빈번히 발생하는 지류 상류 지역에서 농번기에 부족한 물을 확보하기 위하여 평상시 잉여의 물을 지하 대수층에 주입하는 인공함양 방식을 설계함에 앞서 적정 주입량 및 주입효율을 수치모델을 활용하여 평가하고자 하였다. 인공함양 수치모델 대상지역은 홍성군 갈산면 운곡리 일대를 대상으로 하였으며 다양한 공당 주입량 조건과 대수층의 수리적 특성을 고려하여 모델링을 수행한 결과, 연구지역의 공당 적정주입량은 50.0 ㎥/day/공로 평가되었으며 주입효율은 총 주입용량 대비 33.2~81.2%로 예측되었다. 특히, 주입효율은 주입시간이 짧을수록 비선형으로 증가하는 양상을 보였으며 잔류 저류용량은 총 주입용량이 많을수록 증가하여 물부족 시 사용 가능량이 많아지므로 보다 유리할 것으로 보였다. 향후 보다 정확한 함양효율 평가를 위해 현장 실증시험 결과를 활용하여 모델을 검증하고 이를 통해 주입 및 취수에 대한 적정 시나리오를 구축한다면 보다 효율적인 인공함양 시스템의 운영이 가능할 것이다.