• Composites Research
• /
• 제29권1호
• /
• pp.7-15
• /
• 2016

고분자 재료로 된 자동차부품들은 주로 사출성형으로 제작되며, 이 과정에서 뒤틀림, 침전 흔적, 용입선, 수축, 잔류응력 등의 결함이 발생한다. 본 연구를 통해서 이들 결함을 제거할 수 있는 차량용 폴리카보네이트 버튼의 사출성형 공정변수를 실험계획법을 이용하여 최적화 하였다. 공정변수로는 충전압력, 금형온도, 용융온도, 충전시간을 고려했으며 FEM, 다구치법, ANOVA를 사용하여 해석하고 최적화 하였다. 최적화 결과, 충전압력은 140 MPa, 금형온도는 $105^{\circ}C$, 용융온도는 $292.5^{\circ}C$, 충전시간은 1초, 등의 공정변수 값을 얻었으며, 10.2의 S/N 비를 얻었다. 수지의 용융온도가 가장 큰 영향을 미치며, 그 다음으로 금형의 온도였다.

• 한국방사선학회논문지
• /
• 제15권5호
• /
• pp.731-739
• /
• 2021

이 연구는 산업현장에서 구조물의 용접부 검사를 디지털 방사선을 이용한 비파괴검사를 효과적으로 수행할 수 있도록 디지털 방사선의 밝기 교정과 중첩 영상에 따른 신호 대 잡음 비와 기본 공간 분해능을 비교분석 하였다. 평판형 용접 시험편을 대상으로 ⁷⁵Se 방사선원을 사용하였고 촬영 전 밝기 교정과 영상 중첩을 세분화하여 총 130장의 영상을 획득하였다. 연구 결과, 밝기 교정의 수와 영상 중첩의 수가 증가할수록 신호 대 잡음 비가 향상됨을 확인하였다. 기본 공간 분해능은 촬영된 영상 모두 기준치를 만족하였다. 산란 방사선을 대비한 납 차폐를 설치 후 촬영한 영상을 비교하여 신호 대 잡음 비가 비슷함을 확인하였다. 영상 중첩이 증가할수록 신호 대 잡음 비가 증가하지만, 방사선의 노출시간이 증가하면서 작업자의 피폭 및 작업 효율에 영향을 미치기 때문에 적절한 촬영기법을 강구 한다면 좋은 상질의 디지털 방사선 영상을 획득 할 수 있을 것으로 사료된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.479-481
• /
• 2019

최근, 가상현실(VR) 기술을 이용하여 다양한 산업 분야의 훈련 시스템을 제작하여 교육에 널리 활용하고 있다. 가상현실 기반 훈련 시스템은 안전할 뿐만 아니라 재료의 낭비도 없고, 언제 어디서든 실습을 해 볼 수가 있어서 여러 가지 장점이 있다. 예를 들면, 가상현실 용접 훈련 시뮬레이션 시스템은 몰입형 환경에서 철판 모재의 접합을 실제와 같이 수행할 수 있어서 현장 작업자 및 신입 교육 훈련에 널리 쓰이고 있다. 이 때 철판 모재 접합을 사실적으로 표현하는 것이 훈련의 효과를 극대화하기 위해 중요하지만 기존의 기술로는 접합의 효과를 자연스럽게 표현하기에는 한계가 있었다. 본 연구에서는 용접 훈련 시스템을 구축하기 위해 접합 효과를 쉐이더 기반으로 표현하는 방법을 경험 DB와 수학적 모델 기반으로 제시하고자 한다. 본 연구 논문의 결과를 용접 훈련 시스템에 적용하면 철판 모재의 접합 가시화를 사용자에게 정밀도 높게 제공하여 용접 훈련 효과를 보다 향상하는데 도움을 줄 수 있겠다.

• 한국정보통신학회논문지
• /
• 제24권1호
• /
• pp.28-36
• /
• 2020

조선소에서 이루어지는 선박 건조는 용접에 의해 수행되고 있으며, 친환경선박에 대한 국제적인 요구에 따라 용접물량은 증가하고 있다. 용접부는 비파괴검사를 통하여 품질을 보증하고 있으며, 검사 정보를 나타내는 리포트는 인력이 설계된 도면을 확인하여 수작업으로 용접검사 리포트가 작성된다. 이 과정에서 소요되는 많은 공수와 인적오류로 인하여 손실이 발생하고 있다. 이러한 문제 해결을 위해 본 논문에서는 조선 전용 CAD 소프트웨어를 기반으로 설계된 데이터를 입력하여 용접검사에 관한 리포트가 자동으로 생성되는 시스템에 대하여 다룬다. 개발하는 시스템은 모델링의 도면으로부터 형상 데이터를 분석하여 부재 면의 확장을 통해 용접부를 판단 및 태그 넘버를 생성하고, 용접길이, 두께, 재질 등 검사에 필요한 정보를 자동으로 추출하는 기능을 제공한다. 시스템의 유용성을 검증하기 위해 시스템을 통해 추출된 검사 정보와 모델링 도면을 비교하여 일치하는 것을 확인하였다.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.98-104
• /
• 2020

Recently, friction stir welding of dissimilar materials has become one of the biggest issues in lightweight and eco-friendly bonding technology. In this study, a lightweight torsion beam axle, which is an automobile chassis component, was used in the welding to cast aluminum material. The friction stir welding process of A357 cast aluminum and FB590 high-strength steel as well as the effects of the process parameters were investigated and optimized using a novel definitive screening design (DSD). ANOVA was used to predict the importance of the process parameters with 13 degradation experiments using the proposed DSD. Also, FSWed experiments were conducted using an optical microscope analysis to investigate the tensile strength behavior in the weld area. In addition to determining the interaction between the tool's rotational speed and the plunge speed, results indicate that the influence of the plunge depth was the most significant.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.127-132
• /
• 2002

Recent deepwater offshore structures in Gulf of Mexico utilize butt welded tubular joints. Application of welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical because the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimating the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves specified in the codes and standards. Applying the stress concentration factor of the welded structure to S-N approach often results in very conservative assessment because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fracture mechanics and fitness for service (FFS) technology have been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves to be used and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. An attempt was made to develop set of S-N curves based on fracture mechanics approach by considering non-uniform stress distribution and a threshold stress intensity factor. Series of S-N curves generated from this approach were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02"). Similar comparison with API X′ was made for tubular joint.. These initial crack depths are larger than the limits of inspection by current Non-destructive examination (NDE) means, such as Automatic Ultrasonic Inspection (AUT). Thus a safe approach can be taken by specifying acceptance criteria that are close to limits of sizing capability of the selected NDE method. The comparison illustrates conservatism built into the S-N design curve.

• Journal of Welding and Joining
• /
• 제30권2호
• /
• pp.59-64
• /
• 2012

Welding is an essential process in the automotive industry. Most welding processes that are used for auto body are spot welding and $CO_2$ welding are used in a small part. In production field, $CO_2$ welding process is decreased and spot welding process is increased due to welding quality is poor and defects are occurred in $CO_2$ welding process frequently. But $CO_2$ welding process should be used at robot interference parts and closed parts where spot welding couldn't. Because of the 0.65mm ~ 2.0mm thickness steel sheet were used in the automotive industry, poor quality of welding area such as burn through and under fill were happened frequently in $CO_2$ process. In this paper, we will study about the penetration depth which gives a huge impact on burn through changing a degree of base metal, welding position and torch angle. Voltage, current and welding speed were fixed but degree of base metal, welding position and torch angle were changed. And Cold- Rolled(CR) steel sheet was used. Penetration depth was analysed by multiple regression analysis to derive approximate calculations. And reliability of approximate calculations were confirmed through additional experiments. As the results of this research, we confirmed the effect of torch and plate angle to bead shape. And we present a possibility that can simulate more accurate to weld geometry, as deduced the verification equations that has tolerance of less than 21.69%.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.434-441
• /
• 2016

마찰교반용접은 소재와 용접 툴 간의 마찰열에 의해 접합되는 고상접합 공정이다. 용접 시 발생하는 입열량에 따라 용접부의 건전성이 결정된다. 과도한 입열량은 산화물 및 기공결함의 원인이 되며, 불충분한 입열량은 터널결함 등의 문제점이 발생한다. 따라서 마찰교반용접부 중심에서의 온도 이력을 파악하는 것은 건전성을 판단하는 데 있어 매우 중요한 연구이다. 본 연구에서는 마그네슘 합금소재에 대한 마찰교반용접부의 온도분포 특성을 평가하였다. 이를 위해 유한요소해석을 통한 마찰교반용접부의 유동장 및 온도분포를 예측하였다. 유한요소해석을 위해 용접 툴 형상 간소화, 마찰 조건 선정 등 선행 해석을 수행하고 최적조건을 도출하였다. 또한, 해석모델의 검증을 위해 마그네슘 합금의 맞대기 마찰교반용접 시 용접부 중앙에서의 온도를 측정하였다. 유한요소해석 결과 마찰교반용접부의 온도에 영향을 미치는 주요변수의 기여도는 회전속도가 이송속도보다 더 높은 것으로 판단된다. 또한, 용접부 중심에서의 실측 온도와 유한요소해석 결과 사이에 5.4% - 7.7% 수준의 오차 내에서 잘 일치하였다.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.254-263
• /
• 2006

Manganese has a role as both toxic and essential in humans. Manganese is also an essential component in the welding because it increases the hardness and strength, prevents steel from cracking of welding part and acts as a deoxidizing agent to form a stable weld. In this study, manganese generation rate and its content was determined in flux cored arc welding on stainless steel. Domestic two products and foreign four products of flux cored wires were tested in the well designed fume generation chamber as a function of input power. Welding fume was measured by gravimetric method and metal manganese was determined by inductively coupled plasma-atomic emission spectrophotometer. The outer shell of the flux cored wire tube and inner flux were analyzed by scanning electron microscopy to determine their metal compositions. Manganese generation rate($FGR_{mn}$) was increased as the input power increased. It was 16.3 mg/min at the low input power, 38.1 mg/min at the optimal input power, and up to 55.4 mg/min at the high input power. This means that $FGR_{mn}$ is increased at the work place if welder raise the current and/or voltage for the high productivity. The slope coefficient of $FGR_{mn}$ was smaller than that of the generation rate of total fume(FGR). Also, the correlation coefficient of $FGR_{mn}$ was 0.65 whereas that of FGR is 0.91. $FGR_{mn}$ was equal or higher in the domestic products than that of the foreign products although FGR was similar. From the electron microscopic analytical data, we concluded that outer shell of the wire was composed mainly of iron, chromium, nickel and less than 1.2 % of manganese. There are many metal ingredients such as iron, silica, manganese, zirconium, titanium, nickel, potassium, and aluminum in the inner flux but they were not homogeneous. It was found that both $FGR_{mn}$ and content of manganese was higher and more varied in domestic flux cored wires than those of foreign products. To reduce worker exposure to fumes and hazardous component at the source, further research is needed to develop new welding filler materials that improve the quality of flux cored wire in respect to these points. Welder should keep in mind that the FGR, $FGR_{mn}$ and probably the generation rate of other hazardous metals were increased as the input power increase for the high productivity.

• 대한조선학회논문집
• /
• 제55권1호
• /
• pp.66-74
• /
• 2018

In order to evaluate the precision degree of the blocks on the dock, the shipyards recently started to use the point cloud approaches using the 3D scanners. However, they hesitate to use it due to the limited time, cost, and elaborative effects for the post-works. Although it is somewhat traditional instead, they have still used the electro-optical wave devices which have a characteristic of having less dense point set (usually 1 point per meter) around the contact section of two blocks. This paper tried to expand the usage of point sets. Our approach can estimate the rework time to weld between the Pre-Erected(PE) Block and Erected(ER) block as well as the precision of block construction. In detail, two algorithms were applied to increase the efficiency of estimation process. The first one is K-mean clustering algorithm which is used to separate only the related contact point set from others not related with welding sections. The second one is the Concave hull algorithm which also separates the inner point of the contact section used for the delayed outfitting and stiffeners section, and constructs the concave outline of contact section as the primary objects to estimate the rework time of welding. The main purpose of this paper is that the rework cost for welding is able to be obtained easily and precisely with the defective point set. The point set on the blocks' outline are challenging to get the approximated mathematical curves, owing to the lots of orthogonal parts and lack of number of point. To solve this problems we compared the Radial based function-Multi-Layer(RBF-ML) and Akima interpolation method. Collecting the proposed methods, the paper suggested the noble point matching method for minimizing the rework time of block-welding on the dock, differently the previous approach which had paid the attention of only the degree of accuracy.