• Journal of Welding and Joining
• /
• 제11권2호
• /
• pp.62-73
• /
• 1993

Weld pool oscillation for the full-penetration GTA welding process was investigated for its possible application to weld penetration control through theoretical modeling and experiment. Energy method was used to estimate the natural frequency of the molten pool having the physically-acceptable weld geometry and oscillation modes. An unique experimental system was built which had the data acquisiton and video capabilities so that the pool oscillation signals and molten pool surfaces could be monitored continuously. Pool oscillation was detected through arc voltage and arc light emission simultaneously. The signal from arc light emission showed good coherence with that from arc voltage, and arc light generated the higher quality signal. The molten pool was found to oscillate in different oscillation modes based on the travel speed and weld geometry. The natural frequency estimated from the theoretical model agreed reasonably well with the experimental results.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.73-75
• /
• 2007

The resistance spot weld is among the most common automotive weld method, now a constant current type is the most common used types. A constant current type have a weak point which can not deal with a defect occurrence by external factors, and recently the adaptive resistance spot weld have been applied around the advanced automotive company. This technology can maintain a stable weld quality through a suitable control the current and weld time with weld environment. In this research, the adaptive resistance spot weld is applied to high strength steels, and its application possibility and weld characteristics are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.289-294
• /
• 1988

This paper describes tbe design and implementation of the adaptive controller to maintain the glood weld quality in gas metal arc welding process. The weld torch travel speed and the surface temperature are taken, respectively, as an input and an output of the welding control system. Because of the very complex phenomena of the process, the input-output dynamic model was experimentally identified by AIC (Akiake Information Criterion). Based on the model structure, the explicit model reference adaptive controller is simulated in order to regulate the output tempernture to the desired level.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.81-83
• /
• 2003

The potential advantages of the hybrid welding process are improved weld penetration, enhanced gap tolerance, control of weld metal composition, and improved weld quality in comparison to laser or arc welding. Especially, the deep penetration of hybrid welding is very attractive in welding of thick plates. In this study, therefore, the influence of arc power in hybrid welding on detailed bead dimensions at different laser power levels was investigated.

• 대한기계학회논문집
• /
• 제13권6호
• /
• pp.1156-1169
• /
• 1989

본 연구에서는 용접도중 발생할 수 있는 용접질 저항요인을 전극분리현상을 측정하여 파악하고 용접 열입력에 해당하는 용접전류를 학습제어방식(self-learning control)에 의하여 컴퓨터와 주변기기(interface)를 통해 조절함으로서 요구되는 균일한 용접질이 항상 보장되도록 하였다. 여기서 학습제어방식을 태택한 이유는 제어하고자 하는 대상의 동적 모델(dynamic model)이 없어도 제어기 이득의 선정이 비교적 자유롭고 용접 제어장치가 자체적으로 감지(monitoring)한 신호로 판단하여 제어동작을 취함으로서 용접시 축적되는 정보(data)가 용접기에 일종의 지능을 부여할 수 있어서 진보된 개념의 용접제어장치 개발의 가능성을 검토해 보기 위함이다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.205-209
• /
• 2000

This paper is concerned with development of the production-oriented structural design information system to predict the inaccuracy level of panel blocks and to consider the result at the structural design stage. Emphasis is placed on that the inaccuracy during production should likely be considered at the structural design stage to reduce the undesirable adjusting work and therefore to enhance the productivity. The primary goal of the present study is to consider the productivity and the efficient design at the same time for a high quality product of panel block. Usefulness of the developed information are illustrated through some application examples.

• 한국강구조학회 논문집
• /
• 제11권1호통권38호
• /
• pp.1-11
• /
• 1999

본 논문에서는 강구조물의 제작 및 시공에서 용접이음부의 고품질을 확보하기 위하여 강구조물 용접이음부 외부결함의 자동검출에 관한 화상처리 알고리즘을 개발한다. 개발 알고리즘은 광학계의 적절한 배치에 의해 얻어지는 4매의 입력화상을 이용하여 기존의 기법에서 검출할 수 없었던 용접이음부 외부결함을 검출할 수 있음을 보인다. 용접 외부결함이 존재하는 시험편을 제작하고 실험을 통하여 개발 알고리즘의 유용성을 확인하였다. 또한 검출된 용접외부결함의 분류 결과를 육안검사 결과와 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.56.3-56
• /
• 2002

For the weld quality improvement and the convenient operation of machines, laser vision system can be used to track weld seams on pressure vessels. There are many bad conditions to the weld grooves such as cutting error, gap variation of weld joint, and offset error of center line caused by misalignment. We developed a laser vision seam tracking system which consists of a laser vision sensor, a two axis positioning mechanism and a user interface program running on the Windows system. It was found that our system worked well for U, V and X shaped grooves. We used an industrial PC as the system controller to secure immunity to electrical noise and dust. We introduce here a simple and...

• 한국정보통신학회논문지
• /
• 제10권7호
• /
• pp.1326-1331
• /
• 2006

일반적으로 용접 Root 캡은 여러 가지 용접 결함들 중에 용접 품질을 저하시키는 중요한 요인 중의 하나이다. Gas metal arc welding (GMAW)에서 root 갭은 용접 전류, 아크 전압, 용적률 등과 같은 여러 가지 용접 파라미터들에 영향을 미친다. 그러나 용접 공정의 비선형성 때문에 root 갭과 많은 용접 파라미터들 사이의 관계를 분석하기가 힘들다. 그리고 아크센서를 사용하였을 경우, 감지된 신호에 대한 신호처리가 어렵지만 가격이 저렴하고 자동화하기가 쉬우므로 현재의 산업공정에서 대부분 아크센서가 사용되고 있다. 지금까지 언급된 여러 가지 어려운 문제점과 아크센서의 특정 때문에 본 논문에서는 GMAW에서 root 갭을 검출할 수 있는 적당한 용접 파라미터들을 선정하고, root 캡과 선정된 파라미터들의 관계를 인식할 수 있는 신경회로망을 이용하여 root 갭 검출 시스템을 설계하였다. 또한, 용접 품질의 검사에 용접 비드형상이 중요한 요인이다. 따라서 본 논문에서는 신경회로망으로 용접 파라미터와 용접 비드형상과의 관계를 인식하여, 용접 품질을 추정하고 용접 파라미터들의 효과를 분석할 수 있는 용접 비드 형상의 실시간 모니터링 시스템을 제안하여 여러 실험 데이터들을 기반으로 한 시뮬레이션을 통해 제안된 시스템이 root 갭을 검출하고 또한 용접 비드 형상을 실시간으로 모니터링이 가능함 보여준다.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.71-78
• /
• 2007

There have been continuous efforts to automate welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, and using this, the 3 dimensional geometry of the bead is measured in real time. For the application in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.