• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.214-221
• /
• 1998

A new control approach using neural network for the robust position control of a BRUSHLESS direct drive(BLDD) motor is presented. The linear quadratic controller plus feedforward neural network is employed to obtain the robust BLDD motor system approximately linearized using field-orientation method for an AC servo. The neural network is trained in on-line phases and this neural network is composed by a feedforward recall and error back-propagation training. Since the total number of nodes are only eight, this system will be easily realized by the general microprocessor. During the normal operation, the input-output response is sampled and the weighting value is trained by error back-propagation at each sample period to accommodate the possible variations in the parameters or load torque. And the state space analysis is performed to obtain the state feedback gains systematically. In addition, the robustness is also obtained without affecting overall system response.

• Journal of Korean Society of Rural Planning
• /
• v.7 no.1 s.13
• /
• pp.37-48
• /
• 2001

The purpose of this study is to suggest the landscape potential index for visualizing landscape information in the conservation of hilly landscape in urban fringe. For the visual and quantitative approach to topological landscape assessment, numerical entity data of DEM(digital elevation model) were processed with CAD-based utilities that we developed and were mainly focused on analysis of visibility and visual sensitivity. Some results, with reference in assessing greenbelt area of Eodeung Mt. in Gwangju, proved to be considerable in the landscape assessment of suburban hilly landscapes. 1) Since the viewpoints and viewpoint fields were critical to landscape structure, randomized 194 points(spatially 500m interval) were applied to assessing the generalized visual sensitivity, we called. Because there were similar patterns of distribution comparing to those by 56 points and 18 Points given appropriately, it could be more efficient by a few viewpoints which located widely. 2) Regressional function was derived to represent the relationships between probabilities of visibility frequency and the topological factors(topological dominance, landform complexity and relational aspect) of target field. 3) Visibility scores of each viewpoint were be calculated by summing the visual sensitivity indices within a scene. The scores to the upper part including ridge line have been more representative to overall distributions of visual sensitivities. Also, with sum of deviations of sensitivity indices from each single point's specific index to the weighting values of view points could be estimated rotationally. 4) The deviational distributions of visual sensitivity classes in the topological unit of target field were proved to represent the visual vulnerability of the landform. 5) Landscape potential indices combined with the visual sensitivity and the DGN(degree of green naturality) were proposed as visualized landscape information distributed by topological unit.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.191-198
• /
• 2017

To study the behavior of structures subject to blast loads it is important to calculate the loads due to the explosives accurately, especially in the case of interior explosions. It is known that numerical method based on computational fluid dynamics can estimate relatively accurate blast load due to the interior explosion including reflection effect. However, the numerical method has disadvantages that it is difficult to model the analysis and it takes much time to analyze it. Therefore, in this study, the analytical method which can include the reflection effect of the interior explosion was studied. The target structures were set as the slabs of residential buildings subject to interior explosion that could lead to massive casualties and progressive collapses. First, the numerical method is used to investigate the interior explosion effect and the maximum deflection of the slab which was assumed to be elastic, and compared with the analytical method proposed in this study. In the proposed analytical method, we determine the weighting factor of the reflection effect using the beam theory so that the explosion load calculation method becomes more accurate.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.333-343
• /
• 2009

This study presents the analysis of an atmospheric flow around a single-doppler radar located in a pseudo-site. The use of a doppler radar in meteorological field of wind engineering has become widespread over the last several decades, but it has generally been recognized that the single-Doppler radar yields only one single velocity component - the radial velocity($V_r$) so that some additional hypotheses or simplifications must be necessary to get proper wind forecast. Therefore, in order to get an accurate radial velocity($V_r$) in this study, the existing methods such as VAD(Velocity Azimuth Display) and VARD(Velocity Area Display) are reformulated and applied to match the previous study(Waldteufel and Corbin), which have been an important indicator for retrieving a radar velocity. The results presented in this study include the results from different assessment methods in a peudo-site of different wind fields. Unless the existing method can consider the proper decomposition of radial velocity in the real site, then authors suggest an appropriate curve-fitting to decrease the uncertainty errors by changing a grid adaptation rate or applying a weighting function with respect to the wind angle. It is concluded that provided properly formulated fitting function are used, the wind retrieval from the Doppler radar using VAD and VARD methods can be a viable tool for use in wind engineering problems searching for the wind resources.

• The Journal of Information Systems
• /
• v.25 no.2
• /
• pp.153-171
• /
• 2016

Purpose This study suggests the development of forecasting model for local cable TV advertisement. In order to verify the expected effect of the suggestion, using the causal loop map of System Dynamics, the factors affecting the prospects of cable TV commercial market were divided into 5 groups. Then targeting 97 people involved in the cable TV commercial market in Busan, Ulsan, and Gyeongnam, a survey was conducted on their perception of the current status of local advertisement market and future prospect. Design/methodology/approach The analysis of the collected data shows that workers in advertising and advertisers perceive the influence of cable TV as an advertising media to be high, while clearly understanding the problems of cable TV commercial market. Based on this the effects on the prospects of cable TV commercial market were analyzed and a forecasting method called Weighted Moving Average was applied. In order to improve accuracy of the added value of Weighted Moving Average, the 5 factors were divided into qualitative factors and quantitative factors, and using Multi-attribute Decision Making method, all the factors were normalized and weighting factors were deduced. The result of simulating the prospects of cable TV commercial market using Weighted Moving Average, both qualitative and quantitative factors showed downward turn in the market prospect for the following 10 years. Findings The result reflects generally negative perception of advertisement viewers about the prospects of cable TV commercial market. Compared to the previous studies on domestic cable TV commercials that focused on policy suggestions and surveys on perception of current status, this study has its significance in that it used scientific method and simulation for verification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.137-143
• /
• 2017

X-ray image is a widely used to medical examination, airport security and cargo inspection. However, X-ray images contain many visual noise, which interrupt image analysis. Consequently, it is primary importance to reduce noises of X-ray image. In this paper, we present a improved denoise technique for x-ray image using pixel value and range weights. First, we denoise a x-ray image using bilateral filter. Next, we detect a edge region of the original x-ray image. If a denoised pixel belongs to the edge region, we calculate weighting values of original x-ray image and denoised x-ray image in $3{\times}3$ neighboring pixels and compute the cost value to determine the boundary pixel value. Finally, the pixel value having minimum cost is determined as the pixel value of the denoised x-ray image. Simulation results show that the proposed algorithm achieves good performance in terns of PSNR comparison and subjective visual quality.

• Convergence Security Journal
• /
• v.15 no.6_2
• /
• pp.65-78
• /
• 2015

This paper aims to draw practical measures for the Protection of the Rights of the private security guards. The results of the analysis, and presents the legal definition if need be introduced for the protection of private security guards right, are as follows. First, it must be established in Private Security Act the basic provisions that assure the economic status of the private security guards. Secondly, there is a need to clearly define the scope of authority of private security guards. Third, there is a need to clarify the scope of physical force or power in the regulations relating to the duty of the private security guards. This provision during the "displayed its power", there is a possibility that is too arbitrary interpretation, it must be deleted. Fourth, it must be established by weighting penalties for assault of a private security guards. Finally, Private Security Act and the Petition Police Act has a difference in personality and the purpose of the enactment. So it is not desirable to be directly applied to private security guards the provisions that apply to the petition police.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.149-156
• /
• 2017

Nuclear fuel requires high reliability and safety and therefore contains debris filtering devices to prevent failure-inducing debris from entering it. The debris filtering performance of nuclear fuel is one of the most important factors for fuel integrity. Therefore, the performance must be evaluated and the measurement must be reasonable. In this study, a calculation method of the comprehensive filtering efficiency using the weighted mean was proposed to establish a standard filtering efficiency index. To confirm the suitability of the proposed method, representative debris specimens were selected and the filtering efficiency with the weighted mean was compared with the efficiency of the arithmetic mean. The weighting factor of the weighted mean was introduced to produce a fair evaluation. In addition, the analysis of the debris filtering mechanism was performed according to the size of debris specimens, and the main dimensions of the filtering feature for commercial nuclear fuel.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.9
• /
• pp.47-52
• /
• 2016

Unusual extreme weather events, which exceed a safe design capacity of the infrastructure, increase the frequency of natural disasters and has also been enlarged damage scale. Aging buildings and rapid urban progress act as weighting factors for the new composite disasters. Technological advances support detecting pre-disaster risk, real-time data analysis, and rapid response to the disaster site, but it is insufficient that emergency relief for buried alive must take advantage of the proven technologies through field tests. This study aims to evaluate directional drilling performance through underground soils and the reinforced concrete structure for primary lifeline installation in order to quickly provide relief supplies for buried alive when urban structures collapse.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.203-208
• /
• 2007

Because the networks and systems become more complex, the implementation of the security countermeasures for important Information Systems becomes more critical consideration. The designers and developers of the security policy should recognize the importance of building security countermeasures by using both technical and non-technical methods, such as personnel and operational facts. Security countermeasures may be made for formulating an effective overall security solution to address threats at all layers of the information infrastructure. But all these works can be done after assuming who is the threat agent. In this paper we identify the treat agents for information systems, summarize the characteristics of threat agents, and apply weighting factors to them.