• Journal of the Korea Safety Management & Science
• /
• v.4 no.2
• /
• pp.11-22
• /
• 2002

In this study, an asymmetric lifting posture prediction model was developed, which was a three-dimensional model with 12 links and 23 degrees of freedom open kinematic chains. Although previous researchers have proposed biomechanical, psychophysical, or physiological measures as cost functions, for solving redundancy, they lack in accuracy in predicting actual lifting postures and most of them are confined to the two-dimensional model. To develop an asymmetric lifting posture prediction model, we used the resolved motion method for accurately simulating the lifting motion in a reasonable time. Furthermore, in solving the redundant problem of the human posture prediction, a moment weighted Joint Range Availability (JRA) was used as a cost function in order to consider dynamic lifting. However, it is known that the moment weighted JRA as a cost function predicted the lower extremity and L5/S1 joint motions better than the upper extremities, while the constant weighted JRA as a cost function predicted the latter better than the former. To compensate for this, we proposed a hybrid moment weighted JRA as a new cost function with moment weighted for only the lower extremity. In order to validate the proposed cost function, the predicted and real lifting postures for various lifting conditions were compared by using the root mean square(RMS) error. This hybrid JRA reduced RMS more than the previous cost functions. Therefore, it is concluded that the cost function of a hybrid moment weighted JRA can be used to predict three-dimensional lifting postures. To compare with the predicted trajectories and the real lifting movements, graphical validations were performed. The results also showed that the hybrid moment weighted cost function model was found to have generated the postures more similar to the real movements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.5
• /
• pp.595-602
• /
• 2024

This paper analyzes serviceability guidelines and index related to the motion of floating structures concerning human comfort. The guidelines for the motion of floating structures regarding human comfort must meet requirements such as including frequency range of floating structure and providing index for vertical direction, which is a major component of human discomfort. Therefore, ISO 2631-1:1997 was found to be applicable. The evaluation of serviceability of the floating structure showed that the frequency-weighted RMS acceleration, due to the characteristics of frequency weighting function, is significantly influenced by the period of the floating structure. Additionally, the frequency-weighted RMS acceleration presented lower values compared to the general RMS acceleration. These results are expected to contribute to the establishment of reasonable guidelines for human activities to the motion of floating structures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.7
• /
• pp.549-555
• /
• 2008

Analytical method to analyze the tolerance effect on the vehicle ride comfort is suggested in this paper. Ride comfort is one of the most important performance indices which decide the vehicle design quality. In general, the ride comfort is affected by the variations of parameters of a vehicle model. Therefore, the effects of the parameters on the ride comfort need to be evaluated statistically based on the whole-body vibration of the vehicle. In this paper, weighted RMS values of the acceleration PSD of a seat position are used to define the ride comfort. The equations of motion and the sensitivity equations are derived based on a 5-DOF vehicle model. By employing the sensitivity information of the acceleration at the seat position, the tolerance effect on the vehicle ride comfort could be effectively analyzed.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.194-202
• /
• 2015

In this paper, dynamic modeling with viscoelastic properties of a human body resting on a seat is presented to quantitatively analyze ride quality of passengers exposed to vertical vibrations. In describing the motions of a seated body, a 5 degree-of-freedom multibody model from the literature is investigated. The viscoelastic characteristics of seats used in railway vehicles are mathematically formulated with nonlinear stiffness characteristics and convolution integrals representing time delay terms. Transfer functions for the floor input are investigated and it is found that these are different in accordance with the input magnitude due to nonlinear characteristics of the seat. Measured floor input at the railway vehicle is used to analyze realistic human vibration characteristics. Frequency weighted RMS acceleration values are calculated and the effects of the seat design parameters on the frequency weighted RMS acceleration values are presented.

• Journal of the Korean association of regional geographers
• /
• v.10 no.2
• /
• pp.389-406
• /
• 2004

with the increasing popularity of regional studies, the importance of regional data has been recognized dramatically in recent years. However, due to potential problems from the intrinsic characteristics of aggregate regional data for the research, and incompatible regional units between source and target regional data units, the method for reorganizing the regional data units for a given research analysis should be required. In this regard, the purpose of this research is to review the significant interpolation methods for reorganizing the data units and, based on it, to propose the population weighted interpolation method. For the first purpose, areal weighted interpolation method, pycnophylactic method, dasymetric method, area-to-point method were reviewed. The proposed population-weighted interpolation method was applied to the case study of population census regional data in Erie County, NY, compared with areal weighted interpolation method, pycnophylactic method in terms of several statistical characteristics.

• International Journal of Automotive Technology
• /
• v.6 no.2
• /
• pp.141-148
• /
• 2005

In order to reduce the time and costs of improving the performance of vehicle suspensions, the techniques for optimizing damping and air spring characteristic were proposed. A full vehicle model for a bus is constructed with a car body, front and rear suspension linkages, air springs, dampers, tires, and a steering system. An air spring and a damper are modeled with nonlinear characteristics using experimental data and a curve fitting technique. The objective function for ride quality is WRMS (Weighted RMS) of the power spectral density of the vertical acceleration at the driver's seat, middle seat and rear seat. The objective function for handling performance is the RMS (Root Mean Squares) of the roll angle, roll rate, yaw rate, and lateral acceleration at the center of gravity of a body during a lane change. The design variables are determined by damping coefficients, damping exponents and curve fitting parameters of air spring characteristic curves. The Taguchi method is used in order to investigate sensitivity of design variables. Since ride and handling performances are mutually conflicting characteristics, the validity of the developed optimum design procedure is demonstrated by comparing the trends of ride and handling performance indices with respect to the ratio of weighting factors. The global criterion method is proposed to obtain the solution of multi-objective optimization problem.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.249-256
• /
• 2010

This paper presents performance analysis of a quarter-vehicle magneto-rheological(MR) suspension system with respect to different tire pressure. As a first step, MR damper is designed and manufactured based on the optimized damping force levels and mechanical dimensions required for a commercial mid-sized passenger vehicle. After experimentally evaluating dynamic characteristics of the manufactured MR damper, the quarter-vehicle MR suspension system consisting of sprung mass, spring, tire and the MR damper is constructed in order to investigate the ride comfort. After deriving the equations of the motion for the proposed quarter-vehicle MR suspension system, vertical tire stiffness with respect to different tire pressure is experimentally identified. The skyhook controller is then implemented for the realization of quarter-vehicle MR suspension system. Ride comfort characteristics such as vertical acceleration RMS and weighted RMS of sprung mass are evaluated under various road conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.317-325
• /
• 2011

For OFDM (Orthogonal Frequency Division Multiplexing) systems, 2-D MMSE (2-Dimensional Minimum Mean Square Error) channel estimation provides optimal performance in frequency/time selective fading channel environment. However, the 2-D MMSE channel estimation has high computational complexity due to the large matrix size, because the 2-D MMSE channel estimation considers time as well as frequency axis for channel estimation. To reduce the computational complexity, we propose a modified 2-D MMSE channel estimator which is based on 1-D MMSE channel estimation with weighted sum. Furthermore, we consider RMS delay spread and Doppler frequency estimation for 2-D MMSE channel estimation. We show that the proposed method can significantly reduce computational complexity as well as that it can perform close to 2-D MMSE channel estimation.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.245-253
• /
• 2018

The current SBAS service does not provide a method to integrate multiple SBAS corrections. This paper proposes a positioning method to effectively integrate multiple SBAS and multiple GNSS. In the method, the final position is obtained by the weighted sum of the positions obtained from the combination of GNSS and SBAS. Since each position is independently computed and combined using flexible weights, it has a simple structure that can easily cope with various environments. In order to verify the operation and performance of the proposed method, raw measurements of GNSS and SBAS were collected using commercial receivers. The experiments using real signals show that the combined use of two SBAS corrections was more accurate by 0.05~0.4m(2dRMS) than using only one SBAS correction. To improve the position accuracy, this paper considered the integration of multi-GNSS and multi-SBAS, which was not found in other existing studies. The proposed method is expected to be a core technology for designing multi-GNSS navigation receivers considering multi-SBAS corrections. The importance of the method will be increased as KPS and KASS also available in near future.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.749-752
• /
• 2014

New software was developed for the assignment of elemental formulae based on high-resolution mass spectra and subsequent hydrogen/deuterium exchange data. Entire peaks in high-resolution mass spectra were grouped by their Kendrick mass defect values, and the weighted RMS deviations between theoretical and experimental values were used to determine elemental formulae. After this initial assignment, formulae containing deuterium atoms were sorted in order to interpret hydrogen/deuterium exchange spectra. The software was successfully applied to hydrogen/deuterium exchange spectra of resins and aromatic fractions from heavy crude oil.