• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.55-65
• /
• 2014

Recent researches on debris flow is focused on understanding its movement mechanism and building a numerical simulator to predict its behavior. However, previous simulators emulating fluid-like debris flow have limitations in numerical stability, geometric modeling and application of various boundary conditions. In this study, depth integration is applied to continuity equation and force equilibrium for debris flow. Thickness of sediment, and average velocities in x and y flow direction are chosen for main variables in the analysis, which improve numerical stability in the area with zero thickness. Petrov-Galerkin formulation uses a discontinuous test function of the weighted matrix from DG scheme. Presented mechanical constitutive model combines fluid and granular behaviors for debris flow. Effects on slope angle, inducing debris height, and bottom friction resistance are investigated for a simple slope. Numerical results also show the effect of embankment at the bottom of the slope. Developed numerical simulator can assess various risk factors for the expected area of debris flow, and facilitate embankment design in order to minimize damage.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.4
• /
• pp.253-261
• /
• 2012

In order to make dental implant surgery successful, it is important to perform proper planning for dental implant placement. In this paper, we propose a decent approach to dental implant placement planning based on geometric processing of 3D models of jawbones, a nerve curve and neighboring teeth around a missing tooth. Basically, the minimum enclosing cylinders of the neighboring teeth around the missing tooth are properly used to determine the position and direction of the implant placement. The position is computed according to the radii of the cylinders and the center points of their top faces. The direction is computed by the weighted average of the axes of the cylinders. For a cylinder whose axis passes the position along the direction, its largest radius and longest length are estimated such that it does not interfere with the neighboring teeth and the nerve curve, and they are used to select the size and type of an implant fixture. From the geometric and spatial information of the jawbones, the teeth and the fixture, we can construct the 3D model of a surgical guide stent which is crucial to perform the drilling operation with ease and accuracy. We have shown the validity of the proposed approach by performing the finite element analysis of the influence of implant placement on bone stress distribution. Adopted in 3D simulation of dental implant placement, the approach can be used to provide dental students with good educational contents. It is also expected that, with further work, the approach can be used as a useful tool to plan for dental implant surgery.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.385-396
• /
• 2005

In this paper, a new structural approach to on-line signature verification is presented. A primitive pattern is defined as a part segmented by a local minimal position of speed. And a structural description of signature is composed of subpatterns which are defined as such forms as rotation shape, cusp shape and bell shape, acquired by composition of the primitives regarding the directional changes. As the matching method to find identical parts between two signatures, a modified DP(dynamic programming) matching algorithm is presented. And also, variation and complexity of local parts are computed from the training samples, and reference model and decision boundary are derived from these. Error rate, execution time and memory usage are compared among the functional approach, the parametric approach and the proposed structural approach. It is found that the average error rate can be reduced from 14.2% to 4.05% when the local parts of a signature are weighted and the complexity is used as a factor of decision threshold. Though the error rate is similar to that of functional approaches. time consumption and memory usage of the proposed structural approach are shown to be very effective.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1595-1603
• /
• 2020

Online defamation incidents such as Internet news comments on portal sites, SNS, and community sites are increasing in recent years. Bias and hate expressions threaten online service users in various forms, such as invasion of privacy and personal attacks, and defamation issues. In the past few years, academia and industry have been approaching in various ways to solve this problem The purpose of this study is to build a dataset and experiment with deep learning classification modeling for detecting various bias expressions as well as hate expressions. The dataset was annotated 7 labels that 10 personnel cross-checked. In this study, each of the 7 classes in a dataset of about 137,111 Korean internet news comments is binary classified and analyzed through deep learning techniques. The Proposed technique used in this study is multi-channel CNN model with attention. As a result of the experiment, the weighted average f1 score was 70.32% of performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.163-170
• /
• 2022

This paper introduces a method of extracting facial features due to unrefined inputs in real life and improving the problem of not guaranteeing the ideal performance and speed of the object recognition model through a storage algorithm through weight summation. Many facial recognition processes ensure accuracy in ideal situations, but the problem of not being able to cope with numerous biases that can occur in real life is drawing attention, which may soon lead to serious problems in the face recognition process closely related to security. This paper presents a method of quickly and accurately recognizing faces in real time by comparing feature points extracted as input with a small number of feature points that are not overfit to multiple biases, using that various variables such as picture composition eventually take an average form.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.259-266
• /
• 2023

In this paper, we propose an algorithm that can improve the accuracy performance of collaborative filtering using attribute-based opinion mining (ABOM). For the experiment, a total of 1,227 online consumer review data about smartphone apps from domestic smartphone users were used for analysis. After morpheme analysis using the KKMA (Kkokkoma) analyzer and emotional word analysis using KOSAC, attribute extraction is performed using LDA topic modeling, and the topic modeling results for each weighted review are used to add up the ratings of collaborative filtering and the sentiment score. MAE, MAPE, and RMSE, which are statistical model performance evaluations that calculate the average accuracy error, were used. Through experiments, we predicted the accuracy of online customers' app ratings (APP_Score) by combining traditional collaborative filtering among the recommendation algorithms and the attribute-based opinion mining (ABOM) technique, which combines LDA attribute extraction and sentiment analysis. As a result of the analysis, it was found that the prediction accuracy of ratings using attribute-based opinion mining CF was better than that of ratings implementing traditional collaborative filtering.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.4
• /
• pp.339-348
• /
• 2003

Objective : To quantify the economic value of the Sirolimus fluting Stent ($CYPHER^{TM}$) in treating acute coronary heart disease (CMD), and to assist in determining an adequate level of reimbursement for $CYPHER^{TM}$ in Korea. Methods : A decision-analytical model, developed by the Belgium Health Economics Disease Management group, was used to investigate the incremental cost-effectiveness of $CYPHER^{TM}$ versus conventional stenting. The time horizon was five years. The probabilities for clinical events at each node of the decision model were obtained from the results of large, randomized, controlled clinical trials. The initial care and follow-up direct medical costs were analyzed. The initial costs consisted of those for the initial procedure and hospitalization, The follow-vp costs included those for routine follow-up treatments, adverse reactions, revascularization and death. Defending on the perspective of the analysis, the costs were defined as insurance covered or total medical costs (=sum of insurance covered and uncovered medical costs). The cost data were obtained from the administrative data of 449 patients that received conventional stenting from five participating Korean hospitals during June 2002. Sensitivity analyses were peformed for discount rates of 3, 5 and 7%. Since the major clinical advantage of $CYPHER^{TM}$ over conventional stenting was the reduction in the revascularization rates, the economic value of $CYPHER^{TM}$, in relation to the direct medical costs of revascularization, were evaluated. If the incremental cost of $CYPHER^{TM}$ per revascularization avoided, compared to conventional stenting, was no higher than that of a revascularization itself, $CYPHER^{TM}$ would be considered as being cost-effective. Therefore, the maximum acceptable level for the reimbursement price of $CYPHER^{TM}$ making the incremental cost-effectiveness ratio equal to the cost of a revascularization was identified. Results : The average weighted initial insurance covered and total medical costs of conventional stenting were about 6,275,000 and 8,058,000 Won, respectively. The average weighted sum of the initial and 5-year follow-up insurance covered and total medical costs of conventional stenting were about 13,659,000 and 17,353,000 Won, respectively. The estimated maximum level of reimbursement price of $CYPHER^{TM}$ from the perspectives of the insurer and society were $4,126,897{\sim}4,325,161$ and $4,939,939{\sim}5,078,181$ Won, respectively. Conclusion : By evaluating the economic value of $CYPHER^{TM}$, as an alternative to conventional stenting, the results of this study are expected to provide a scientific basis for determining the acceptable level of reimbursement for $CYPHER^{TM}$.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.2
• /
• pp.177-182
• /
• 1999

Objectives: To reexamine the association between air pollution and daily mortality in Seoul, Korea using a method of meta-analysis with the data filed for 1991 through 1995. Methods: A separate Poisson regression analysis on each district within the metropolitan area of Seoul was conducted to regress daily death counts on levels of each ambient air pollutant, such as total suspended particulates (TSP), sulfur dioxide $(SO_2)$, and ozone $(O_3)$, controlling for variability in the weather condition. We calculated a weighted mean as a meta-analysis summary of the estimates and its standard error. Results: We found that the p value from each pollutant model to test the homogeneity assumption was small (p<0.01) because of the large disparity among district-specific estimates. Therefore, all results reported here were estimated from the random effect model. Using the weighted mean that we calculated, the mortality at a $100{\mu}g/m^3$ increment in a 3-day moving average of TSP levels was 1.034 (95% Cl 1.009-1.059). The mortality was estimated to increase 6% (95% Cl 3-10%) and 3% (95% Cl 0-6%) with each 50 ppb increase for 9-day moving average of SO2 and 1-hr maximum O3, respectively. Conclusions: Like most of air pollution epidemiologic studies, this meta-analysis cannot avoid fleeing from measurement misclassification since no personal measurement was taken. However, we can expect that a measurement bias be reduced in a district-specific estimate since a monitoring station is hefter representative cf air quality of the matched district. The similar results to those from the previous studios indicated existence of health effect of air pollution at current levels in many industrialized countries, including Korea.

• KDI Journal of Economic Policy
• /
• v.32 no.2
• /
• pp.144-170
• /
• 2010

This paper considers the effect of various types of procurement auction system on competition focusing on the rate of successful bidding. We analyze the number of bidders and the rate of successful bids using online procurement data of the Public Procurement Service. The average number of bidders is 301 and the average rate of successful bids is 87.42% while the weighted average rate is 75.13%. These numbers show that there is quite strong competition among bidders and the rate is lower as the expected price is higher. When we analyze the data of price procurement auction, the rate is also shown to be lower as the expected price is higher. Furthermore, the rate decreases as the number of bidders increases which naturally makes the competition stronger. Meanwhile, the analysis finds that the inclusion of the onsite bidding, the PQ(Pre-Qualification) result, or major-10 winning companies cannot explain the rate much in our data. In case of turnkey-alternative, the average rate of successful bidding for 484 cases record 90.20%. The average is 84.89% with 120 alternatives and 91.97% with 364 cases of turnkey. The reason why the rate of turnkey-alternative is lower than that of price procurement auction is the lack of competition as well as the systematic difference. By setting up a model, we are able to explain the difference in rate caused by the respective reason. When we suppose there are 3 bidders in case of price procurement auction for a project that exceeds 100 billion won, the rate is expected to be around 64%. This implies that difference of 26% is caused by the systemic difference and 3% by the lack of competition. Therefore, we conclude that the difference in rate between turnkey-alternative and price procurement auction is caused mainly by the systemic difference. In case of PPP(Public Private Partnership) projects, among 154 projects in total, only 40% has more than 2 bidders that compete. The average number of bidders is 1.88 which is less than 2, and the average rate of successful bids is 90%. In sum, under the price procurement auction, there is strong competition which is reflected by the rate of successful bids. However, there is room to decrease the rate by strengthening the competition under the turnkey-alternative. Also with PPP projects, we expect the rate can be steadily reduced with revived competition among bidders.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.91-100
• /
• 2008

Numerical implementation with a Cartesian cut-cell method is conducted in this study. A Cartesian cut-cell method is an easy and efficient mesh generation methodology for complex geometries. In this method, a background Cartesian grid is employed for most of computational domain and a cut-cell grid is applied for the peculiar grids where the flow characteristics are changed such as solid boundary to enhance the accuracy, applicability and efficiency. Accurate representation of complex geometries can be obtained by using the cut-cell method. The cut-cell grids are constructed with irregular meshes which have various shape and size. Therefore, the finite volume method is applied to numerical discretization on a irregular domain. The HLLC approximate Riemann solver, a Godunov-type finite volume method, is employed to discretize the advection terms in the governing equations. The weighted average flux method applied on the Cartesian cut cell grid for stabilization of the numerical results. To validate the numerical model using the Cartesian cut-cell grids, the model is applied to the rectangular tank problem of which the exact solutions exist. As a comparison of numerical results with the analytical solutions, the numerical scheme well represents flow characteristics such as free surface elevation and velocities in x-and y-directions in a rectangular tank with the Cartesian and cut-cell grids.