• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.12-13
• /
• 2019

Flexible Table Form is being used more frequently at the level of formwork in construction site. However, one of the most common structural frameworks, the RC column-beam structure, is having problems in these factors. To improve this problems, this study developed support devices and proposed installation specifications to enable application of the one-way void slab method to flexible table form. It is expected that the effects of reducing the self-weight of the slab in the floor slab construction using flexible table form.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.2
• /
• pp.130-166
• /
• 1996

As compared with body height and body weight by ages and sexes, by means of the data reported under other researchers from 1967 to 1994 for 33 years, this study obtained the estimate value of body height and body weight by ages and sexes for the same period, and figured out prediction value of body height and body weight in the ages of between 6 and 14 from 1995 to 2000. These surveys and measurements took for one year from October 1st 1994 to September 30th. As shown in the 〈Table 1〉, in order to calculate the establishment, estimate value and prediction value of the chronological regression model of body height and body weight, by well-grounded 17 representative research papers, this research statistically tested propriety of liner regression model by the residual analysis in advance of being reconciled to simple liner regression model by the autonomous variable-year and the subordinate variable-body weight and measured prediction value, theoretical value from 1962 to 1994 by means of 2nd or 3rd polynomial regression model, with this redult did prediction value from 1995 to 2000. 1. Chronological Change of Body Height and Body Weight The analysis result from regression model of the chronological body height and body weight for the aged 6 - 16 in both sexes ranging from 1962 to 1994, corned from the 〈Table 2-20〉. On the one hand, the measurement value of respective researchers had a bit changes by ages with age growing, but the other hand, theoretical value, prediction value showed the regular increase by the stages and all values indicated a straight line on growth and development with age growing. That is, in case of the aged 6, males had 109.93cm in 1962 and females 108.93cm, but we found the increase that males had 1I8.0cm, females 1I3.9cm. In theoretical value, prediction value, males showed the increase from 109.88cm to 1I7.89cm and females from 109.27cm to 1I5.64cm respectively. There was the same inclination toward all ages. 2. Comparision to Measurement Value and Prediction Value of Body Height and Body Weight in 1994 As shown in the 〈Table 21〉, in case of body height, measurement value and prediction value of body height and body weight by ages and sexes almost showed the similiar inclination and poor grade, in case of body weight, prediction value in males had a bit low value by all ages, and prediction value in females had a high value in adolescence, to the contrary, a low value in adult. 3. Prediction Value of Body Height and Body Weight from 1995 to 2000 This research showed that body height and body weight remarkably increased in adolescence but slowly in adult. This study represented that Korean physique was on the increase and must be measured continually hereafter.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.299-299
• /
• 2017

Due to the climate changes in Korea, the numbers of both torrential rain events and drought periods have increased in frequency. Water management practice against water shortage and flooding is one of the key interesting for field crop cultivation, and groundwater often serves as an important and safe source of water to crops. Therefore, the objective of this study is to evaluate the effect of groundwater table levels on soil water content and soybean development under two different textured soils. The experiment was conducted using lysimeter located in Miryang, Korea. Two types of soils (sandy-loam and silty-loam) were used with three groundwater table levels (0.2, 0.4, 0.6m). Mean soil water content during the soybean growth period was significantly influenced by groundwater table levels. With the continuous groundwater level at 0.2m from the soil surface, soil water content was not statistically changed between vegetative and reproductive stage, but the 0.4 and 0.6m groundwater table level was significantly decreased. Lower chlorophyll content in soybean leaves was found in shallow water table treatment in earlier part of the growing season, but the chlorophyll contents were non-significant among water table treatments. Groundwater table level treatments were significantly influenced on plant available nitrogen content in surface soil. The highest N contents were observed in 0.6m groundwater table level. It is probably due to the nitrogen loss by denitrification as the result of high soil water content. The length and dry weight of primary root was influenced by groundwater level and thus the highest length and dry weight of root were observed in 0.6m water table level. This result showed that soybean root growth did not extend below the groundwater level and increased with the depth of groundwater table level. The results of this study show that the management of groundwater level can influence on soil characteristics, especially on soil water content, and it is an important practice of to reduce yield loss caused by the water stress during the crop growing season.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.581-586
• /
• 2003

This paper presents control designs using neural networks (NN) for a XY positioning table. The proposed neurocontroller is composed of an outer PD tracking loop for stabilization of the fast flexible-mode dynamics and an NN inner loop used to compensate for the system nonlinearities. A tuning algorithm is given for the NN weights, so that the NN compensation scheme becomes adaptive, guaranteeing small tracking errors and bounded weight estimates. Formal nonlinear stability proofs are given to show that the tracking error is small. The proposed neuro-controller is implemented and tested on an IBM PC-based XY positioning table, and is applicable to many precision XY tables. The algorithm, simulation, and experimental results are described. The experimental results are shown to be superior to those of conventional control.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.6
• /
• pp.41-47
• /
• 2004

This study is aimed to measure the deflection of loaded table on machine tool. The deflection rate is measured then the table is in a stationary state and is moved. In conclusion we have found that the more load increases, the more the table deflections. Also, we have found that the deflection rate increases in accordance with the speed of movement. Therefore, we have concluded that inspection of machine tool should be done considering the weight of load and the speed of movement. However, since the condition of accuracy test for domestic brand of machine tool is defined as unloaded case, measures should be explored only for loaded case.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.2
• /
• pp.113-119
• /
• 2002

An FLNN-based neural network controller is applied to precise positioning of XY table with friction as the extension study of [11]. The neural network identifies the frictional farces of the table. Its weight adaptation rule, named the reinforcement adaptive learning rule, is derived from the Lyapunov stability theory. The experimental results with 2-DOF XY table verify the effectiveness of the proposed control scheme. It is also expected that the proposed control approach is applicable to a wide class of mechanical systems.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.26-35
• /
• 2010

In this paper, we propose the peer indexing scheme using data dissemination considering content and mobility. The proposed scheme consists of an index table, a buddy table, a routing table to support the cost of data dissemination, the search accuracy and cost. In this proposed scheme, a neighbor peer is recognized through a signal function and the cost of data dissemination is reduced by timestamp message. The transmitted messages are stored in the index structure considering timestamp and weight of interests which improves search accuracy and reduces the cost of search.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.86-91
• /
• 2009

Purpose: The whole body scan in Nuclear Medicine is a widely accepted examination and procedure. Especially, it is mainly used in bone, I-131, MIBI, and HMPAO WBC scans. The diverse uses of the whole body scan range from the HMPAO WBC scan with a speed of 13cm/min, to a whole body bone scan using the Onco. Flash technique with a speed of 30cm/min. The accuracy of table movement has a strong correlation with the image quality, and inaccuracy of speed could negatively affect the image quality. The purpose of this study is to evaluate the accuracy of the table movement while considering the influence of the age of the equipment and the variability in the weight of the patients. Material and Methods: The study was conducted using two of Seoul Asan Medical Center's SIEMENS gamma cameras which are commonly used in our whole body study. The first one is the oldest gamma camera, an ECAM plus (installed in 2000), and the last is brand new one, a SYMBIA T2 (installed in 2008). Three trials were conducted with the tables moving at a different speed each time; 10, 15 and 30 cm/min. The tables' speeds were measured by checking how long it took for the table to move 10cm, and this was repeated every 10cm until the table reached 100 cm. With an average body weight of the patients of about 60~70 kg, the table speed was measured with weights of 0 kg, 66 kg and 110 kg placed on the table, then compared among conditions. Results: The coefficient of variance (CV) of the ECAM plus showed 1.23, 1.42, 2.02 respectively when the table movement speeds were set at 10, 15, and 30 centimeters per minute. Under the same conditions, the SYMBIA T2 showed 1.23, 1.83 and 2.28 respectively. As table movement speed more, the variance of CV as the speed increases. When the patient body weight was set to 0, 66 and 110kg, the CV values of both cameras showed 0.96, 1.45, 2.08 (0 Kg), 1.32, 1.72, 2.27 (66 Kg) and 1.37, 1.73, 2.14 (110 Kg). There was no significant difference (p>0.05) in 95 percent of confidence intervals and measured CV values were acceptable. However, the CV value of the SYMBIA T2 was relatively larger than the ECAM plus. Conclusion: The scan speed of the whole body scan is predetermined based on which examination is being performed. It is possible for the accuracy of the speed to be affected, such as the age of the equipment, the state of the bearings or the weight of a patient. These factors can have a negative impact on the diagnostic consistency and the image quality. Therefore, periodic quality control should be needed on the gamma cameras currently being used, focusing on the table movement speed in order to maintain accuracy and reproducibility.

• Journal of Sericultural and Entomological Science
• /
• v.10
• /
• pp.41-43
• /
• 1969

The experimental studies were intended to clarify the effects leaf yield calculations, and also aimed at estimating the heritabilities on some characters for the selection of desirable stocks of mulberry trees. The method of estimating heritabilities for the eight characters-branch length, node number, branch diameter, branch number per stock, total branch weight, old branch weight, new shoot and leaf weight, and leaf weight, was the variance components procedures in a replicated trial for the varietal lines. The results are summarized as follows: Means, variances and standard errors for the characters are shown in table 1, and the results of variance analyses are also shown in table 2. Heritability values of node number was the highest, and these of branch number per stock was the lowest, and these of other six characters were intermediate values. These all calculated heritability values were higher than anticipated. This was expected since these values, which were the broad sense heritability, contain the variance due to dominance and epistasis in addition to the additive variance.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.121-127
• /
• 1968

This research has been dealt with the nutritional component analysis of two kinds of non-edible marine algae, Sargassum herneri (Turner) C. Ag. and Zostera marina Linne which grow abundantly around the southern coast of Korea, These marine algae were mixed in several kinds of samples rates with the combined feed for poultry sold in the market. These were given to 35 chicken in seven test divisions respectively. We have experimented with 35 chicken grown up for two weeks after hatchout. The combined food for poultry obtained from the market was set up as control divisions. The experiments were as follows: 1) The average weight increase in each test division during feeding (Table 5, Fig.2). 2) Food conversion rate and food efficiency in each test division (Table 7). 3) The comparison of digestive rate of crude protein during feeding (Table 8), The results were as follows: 1) The weight increasing rate of the test animal stock fed the food containing $5\~10\%$ of Sargassum horneri (Turner) C. Ag. powder was higher than the rate of those fed only market food for poultry. 2) The stock given food containing $10\%$ Zostera marine powder showed lower growth than the control divison. 3) No apparent trouble owing to salt component involved in the marine algae was found. 4) The stock given food containing sodium glutaminate and Sargassum horneri (Turner) C. Ag. had better result than that without sodium glutaminate.