• 제목/요약/키워드: Weight table

검색결과 360건 처리시간 0.026초

기술논문 : 연성하중해석을 이용한 구조 최적화 기법 연구 (Technical Papers : Optimization Method of Structure by Using Coupled Load Analysis)

  • 이영신;김인걸;황도순
    • 한국항공우주학회지
    • /
    • 제30권1호
    • /
    • pp.132-138
    • /
    • 2002
  • 오늘날 여러 가지 측면에서 전략적으로 고성능의 위성 본체를 개발하는 것은 매우 중요하다. 본 연구에서는 부분구조합성법의 하나인 구속모드법을 이용한 연성하중해석 기법 및 모달 과도해석법을 사용하여 위성체 구조부재에 대한 최적화를 수행하였다. 제안된 방법은 초기 설계시, 일반적으로 사용되고 있는 준정적 하중을 이용하지 않고, 동종의 발사체에 대해 유사한 위성과의 연성하중해석 자료를 이용함으로써, 각 구조부재에 대해 보다 정확한 결과를 얻을 수 있는 장점이 있다. 예제를 통해 제안된 기법이 초기단계의 위성체 구조 부재의 효율적인 최적설계 및 중량 감소를 위해 적용될 수 있음을 확인하였다.

랩-베일을 이용한 양돈용 TMR 발효사료 제조 시스템 개발 (Development of a Fermented TMR for Pigs Using Bale-Wrapping System)

  • 김혁주;유병기;이성현;유지수;서형덕
    • 한국축산시설환경학회지
    • /
    • 제20권3호
    • /
    • pp.105-116
    • /
    • 2014
  • In this study, we developed a fermented TMR producing system which could a continuous operation of baling and wrapping the mixed TMR. The baling part has fixed chamber of dia. 900 mm and width 900 mm. And the the turn-table type wrapping part is very compact compared to conventional one in market. The test result were: The absorbed power of the prototype in working was 9.0~15.7 kW. The combined baling and wrapping performance was over 20 bales/hr. The leakage in the process was around 1.9 kg for making a 350 kg TMR bale. The diameter of wrapped TMR bale was 900~950 mm, and its weight was 350 kg in average. Therefore the density was $718kg/m^3$, and it was very high density to the inputted TMR. The pH of the fermented TMR was 5.0~5.6 which was similar to the fermented haylage, also the TMR had no butyric acid's odor.

유전 알고리즘을 이용하여 영양 상태에 따른 개인에게 최적화된 식단 설계 (A design of the meal for individuals in accordance with the nutritional status by using the genetic algorithm.)

  • 김형우;김한진
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제4회(2015년)
    • /
    • pp.484-487
    • /
    • 2015
  • The purpose of this study is designing a daily diet according to the nutrition by using genetic algorithms. The ratio of the amount of nutrients needed for each individual is different. For example, people who want to lose, maintain or gain the weight need different amount of nutrition and ratio. In addition, the nutrition should be different between the age groups such as child, youth and senior. So, it is important for each person to individualize content of nutrition that they need not the nutritional standard table. Thus, in this study, by using the genetic algorithm, our study is about the program that can make a daily diet which is optimized for individual. The program has the information of main dish, soup and side dish that we entered before. And person who uses the program can see the daily diet which is optimized related by nutrition what the person entered before. Generally, it is really difficult to design a meal by considering all of the nutrition at home because there are a lot of things to be considered. Therefore, the goal of our study is to make the program what can make a balanced daily diet at home.

  • PDF

An Efficient Algorithm for Dynamic Shortest Path Tree Update in Network Routing

  • Xiao, Bin;Cao, Jiannong;Shao, Zili;Sha, Edwin H.M.
    • Journal of Communications and Networks
    • /
    • 제9권4호
    • /
    • pp.499-510
    • /
    • 2007
  • Shortest path tree(SPT) construction is essential in high performance routing in an interior network using link state protocols. When some links have new state values, SPTs may be rebuilt, but the total rebuilding of the SPT in a static way for a large computer network is not only computationally expensive, unnecessary modifications can cause routing table instability. This paper presents a new update algorithm, dynamic shortest path tree(DSPT) that is computationally economical and that maintains the unmodified nodes mostly from an old SPT to a new SPT. The proposed algorithm reduces redundancy using a dynamic update approach where an edge becomes the significant edge when it is extracted from a built edge list Q. The average number of significant edges are identified through probability analysis based on an arbitrary tree structure. An update derived from significant edges is more efficient because the DSPT algorithm neglect most other redundant edges that do not participate in the construction of a new SPT. Our complexity analysis and experimental results show that DSPT is faster than other known methods. It can also be extended to solve the SPT updating problem in a graph with negative weight edges.

"음식법(찬법)"의 조리학적 고찰 (A Study on the cooking in "Umsikbup")

  • 박미자
    • 대한가정학회지
    • /
    • 제34권2호
    • /
    • pp.283-302
    • /
    • 1996
  • The Umsikbup is a book of Korean woman's life in the Yi-dynasty which published in middle of nineteenth century by unknown author. I have studied the food habits of the Yi-dynasty that wrote in umsikbup as followings ; The stape foods are Bab (boiled cooked rice) 1, Myons (noodles) 4 and Mandu 5 kinds. The side dishes are Guk (soup) 3, Sinsollo 1, Jim 9, Jijim 1, Nooruemi 6, Sun 2, Po 3, Muchim 1, Jabans 3, Jockpyuns 2, Pyunyuk 1, Chae 2, and Kimchi 1 kinds. Thare are D'ock 22, Kwajung 46, Beverages 9 and alcohol are 4 kinds. There are many kinds of Dasikk of the Kwajung in the Umsikbup than no other cooking books. The seasonings are soybean sauce 5, honey 6, oil 4 and sesame seeds 3, ect. There are the description of food types in the seasonal variation and also there are the wisdom of life and avoiding food ; toxic meats, fishes, vegetables and fruits in the taboo food. There are most of Kwajung in the Chanhap (food packed in nest of boxes) in addition to beverages, D'ock, Mandu, decoration methods in the seasonal variation. There are many food making terms which are 163 kinds of prepared cooking term 27 kinds of cutting terms and 17 kinds of boiling terms. And 18 kinds of expression of taste can be seen in this book. There are 24 kinds of table were and cooking kitchen utensils, but many of them came to usefulness 12 kinds of measuring units are very non-scientific because that is not by weight but by bulk or volume.

  • PDF

신생아 위 자연천공에 대한 임상적 고찰 (Clinical Review of Spontaneous Gastric Perforation in the Newborn)

  • 황승욱;박진영;장수일
    • Advances in pediatric surgery
    • /
    • 제9권1호
    • /
    • pp.30-34
    • /
    • 2003
  • Spontaneous gastric perforation in the newborn is a rare disease that requires early diagnosis and prompt surgical treatment. Between 1988 and 2001 at the Department of Pediatric Surgery. Kyungpool National University Hospital, 9 cases of spontaneous gastric perforation were treated. Seven were males and two females. The mean gestational age and birth weight were 36.7 weeks and 2,455 g respectively. All patients presented with severe abdominal distention and pneumoperitoneum on cross table lateral film of the abdomen. Perforations were located on the anterior wall along the greater curvature of the stomach in six and on the posterior wall along the greater curvature in two. One case showed two sites of perforation on the anterior and posterior wall along the greater curvature. Six patients were managed with debridement and primary closure and the others with debridement and partial gastrectomy. Peritoneal drainage was not performed. There were four deaths; two from sepsis due to leakage from the anastomotic site, one as a result of acute renal failure, and the other by associated respiratory distress syndrome. Spontaneous gastric perforation in the newborn is usually located along the greater curvature. Elevated intragastric pressure is a possible cause of the perforation. Poor prognosis is related to associated diseases and prematurity.

  • PDF

직교배열표 실험계획법에 의한 심해저 점착성 연약지반용 무한궤도차량의 선회성능에 대한 실험 연구 (An Experimental Study on Steering Performance of Tracked Vehicle on Deep-sea Cohesive Soft Soil by DOE using Orthogonal Arrays)

  • 최종수;홍섭;김형우
    • 한국해양공학회지
    • /
    • 제20권4호
    • /
    • pp.37-42
    • /
    • 2006
  • This paper is concerned with experimental investigation of steering performance of a tracked vehicle on extremely soft soil. A tracked vehicle model with principal dimensions of 0.9 m(L)x0.75 m(B)x0.4 m(H) and weight of 167 kg was constructed with a pair of driving chain links, driven by two AC-servo motors. The tracks were configured with detachable grousers with variable span. A deep seabed was simulated by means of a bentonite-water mixture in a soil bin of 6.0 m(L)x3.7 m(B)x0.7 m(H). The turning radii of vehicle and driving torques of motors were measured with respect to experiment variables: steering ratio, driving speed, grouser chevron angle, grouser span, and grouser height. L8 orthogonal table is adopted for DOE (Design of experiment). The effects of experiment variables on steering performance are evaluated.

융복합기술(融複合技術)에 의한 폐(廢)콘덴서로부터 탄탈륨 재활용(再活用) 기초연구(基礎硏究) (A Preliminary Study on Tantalum Recycling from Obsolete Condenser by Multidisciplinary Process)

  • 이후인;김상배;김병곤;최영윤
    • 자원리싸이클링
    • /
    • 제16권6호
    • /
    • pp.34-38
    • /
    • 2007
  • 폐콘덴서로부터 탄탈륨 음극을 회수하기 위하여 물리적 선별과, 염소가스와 사염화탄소를 이용한 기초 염화반응에 관한 연구를 수행하였다. Stamp mill을 이용한 파쇄, 요동테이블에서의 습식 비중선별 그리고 공기 분급을 통하여 탄탈륨 음극을 98% 회수할 수 있었다. 염소가스를 이용한 TGA분석에서 탄탈륨 음극의 최대 무게 감소는 60%였고, 사염화탄소에 의한 탄탈륨 음극의 염화반응은 탄탈륨 음극을 산화탄탈륨으로 변환한 후가 반응율이 높았다.

대형 유연박판 회전이송용 비접촉 파지시스템 설계 (Non-Contact Pick-up System for Turning Large Flexible Thin Sheets)

  • 김준현;안성욱;이세진
    • 한국생산제조학회지
    • /
    • 제23권5호
    • /
    • pp.435-442
    • /
    • 2014
  • This paper describes an improved design model that can be used to configure a non-contact pneumatic device to turn a large sheet at the in-line system. For rotational moving in the conveyor system, the conventional method is to turn the system itself. The improved non-contact pick-up system mainly uses 8 pairs of L-shaped latches and 12 swirl type heads. It is positioned above the upward air flow table. This system performs the non-contact gripping and side-edge contact support in the vertical and rotational directions to hold the self-weight of a large flat sheet. A non-contact air head can exert a sufficient gripping ability at 4N lower than the standard working pressure. The side latches support 60% of the lifting force required. Through structural and flow analysis, the working conditions were simultaneously considered in accordance with the deflection and flatness of the glass.

Modified Chain Coding 을 이용한 실시간 부정맥 모니터링 기법에 관한 연구 (A Study on The Method of Real-Time Arrythmia monitoring Using Modified Chain Coding)

  • 윤지영;이정환;이명호
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 춘계학술대회
    • /
    • pp.31-35
    • /
    • 1996
  • This paper presents a real time algorithm for monitoring of the arrythmia of ECG signal. A real time monitoring, following by detecting a QRS complex, is the most important. Using 2-dimensional time-delay coordinates which are reconstructed by the phase portrait plotting special trajectory, we detect QRS complexes. In this study, arrythmias are detected by matching the past standard template with tile present pattern when changing abruptly In order to matching with each other, we propose modified chain coding algorithm which applies vetor table consisting of eight orthonormal code(=binary code) to the phase portraits. This algorithm using logical function increases the weight if exceeding to the threshold determinded by correlation value and the distance from a straight line(y=x). Evaluating the performance of the proposed algorithm, we use standard MIT/BIH database. The results are fellowing, 1) Improve the speed of matching template than that of cross-correlation ever has been used. 2) Because the proposed algorithm is robust to varing fiducial point, it is possible to monitor the ECG signal with irregular RR interval. 3) In spite of baseline wandering owing to the low frequency noise, monitoring performance is not reduced.

  • PDF