• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.493-501
• /
• 2016

Objective: This study analyzes the effect of angle conditions of rehabilitation equipment used for supporting hemiplegic patients on their rehabilitation training for standing action. The study was performed by adjusting the rear angle of seat inclination through a motion analysis. Background: Owing to a loss of muscle rigidity and degradation of muscle control ability, hemiplegic stroke patients suffer from asymmetrical posture, abnormal body balance, and degraded balance abilities due to poor weight-shifting capacity. The ability to shift and maintain one's weight is extremely essential for mobility, which plays an important role in our daily life. Thus, to improve patients' ability to maintain weight evenly and move normally, they need to undergo orthostatic and ambulatory training. Method: Using a motion analysis system, knee movements on both hemiplegic side and non-hemiplegic side were measured and analyzed in five angles ($0^{\circ}$, $10^{\circ}$, $30^{\circ}$, $50^{\circ}$, $70^{\circ}$) while supported by the sit-to-stand rehabilitation equipment. Results: The knee movements on both sides increased as the angle increased in angle support interval to support a hemiplegic patient's standing up position. In standing up interval, a hemiplegic patient's knee movement deviations on both sides decreased, and the movement differences between hemiplegic and non-hemiplegic legs also decreased as the angle increased. Conclusion: The results of this study showed that the rehabilitation effectiveness increases as the angle increases, leading to a balanced standing posture through the decrease of movement difference between hemiplegic and non-hemiplegic sides and an improved standing up ability through the increase of knee movement on both sides. However, angles higher than $50^{\circ}$ didn't provide a significant effect. Therefore, a support angle under $50^{\circ}$ was proposed in this study. Application: The results of this study are expected to be applicable to the design of sit-to-stand support equipment to improve the effectiveness of the rehabilitation process of hemiplegic patients.

• Journal of Korean Clinical Nursing Research
• /
• v.17 no.2
• /
• pp.239-250
• /
• 2011

Purpose: This study was aimed to evaluate the effects of Labor Support Behaviors (LSB) one-to-one application and partner's delivery participation on the delivery satisfaction and delivery results among mothers who delivered premature birth and low birth weight infant. Methods: The data were collected from 30 mothers in the experimental group and 27 in the control group from April 23, 2009 to April 22, 2010. The collected data were analyzed using percentage, mean, standard deviation, $x^2-test$ (Fisher's exact test) and t-test with SPSS. Results: The satisfaction levels of the experimental group and the control group women were $3.73{\pm}0.43$ and $3.72{\pm}0.34$ as mean values, respectively, showing not statistically different (t=0.07, p=.945). None showed less than 7 point of Apgar score at 1 minute in the experimental group while 5 out of 27 did (18.5%) in the control group, which was statistically meaningful. Also, the emergent cesarian section cases were 3 out of 33 (9.1%) in the experimental group and 5 out of 32 (15.6%) in the control group, demonstrating lower emergency cesarian section rate in the experimental group than the control group, but showing not statistically different ($x^2=0.643$, p=.475). Conclusion: The results of this study show that LSB one-to-one application and partner's participation has affirmative effects on 1 minute Apgar scores of newborns.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2013

The 1st assessment(performance test) was applied to assure the floor impact sound performance for developing the dry double-floor with the change of rubber hardness of the upper panel's support and the ceiling structure of the sub-floor. Depends on the change of the rubber hardness in sub-structure, the heavy-weight sound impact value is improved up to 3 dB, and the light-weight sound impact value is moved up to 21 dB, comparing with the bare-slab. Also, the improved value for the floor impact sound conjugating with the sub-floor's ceiling was 5 dB. Based on this result, the 2nd assessment(performance test) was made the state that the rubber hardness of the sub-floor support was ranged between 50 and 70 for considering the stability of walking patients. In addition to this process, the assessment was carried out with a variety of ceiling structure applied to the dry double-floor structure with the air flow system on the sub-floor's ceiling. The result for the 2nd assessment proved that TYPEII-3 had the better sound reduction performance in the heavy-weight impact sound test than other types, and also for the light-weight impact sound TYPEII-3 had the 29 dB sound reduction performance overall. Henceforth, based on the result the research for the sound reduction performance from the floor impact sound shall be ongoing process as well as the development of a double-dry floor and a sound reduction ceiling to suitable on the field.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.3
• /
• pp.662-672
• /
• 2009

Obesity has increased dramatically increased in recent days. It has resulted in obesity-associated diseases and metabolic syndromes including hyperlipidemia, diabetes and cardiovascular diseases. Our study was investigated to determine the antiobese effects of mixed 2 medicinal herbs (AR+AC) in rats fed high-fat diet with an abundance of carbohydrates. Two groups of male Sprague-Dawley rats were fed different diets during 8 weeks: normal diet containing 5% corn oil (w/w), high-fat diet containing 10% (w/w) lard plus 5% (w/w) corn oil (HF). And High-fat diet group was treated with saline or 100 mg/kg ARAC or 300 mg/kg ARAC (PO). Antiobese effect was evaluated by measuring the changes of body weight, adipose tissues weight. Also we examined levels of leptin, adiponectin and lipid profiles in serum. Finally we compared morphological change in adipocytes and hepatocytes between HF and ARAC group. Mixed combination of 2 medicinal herbs, but not alone, caused significant decrease in body weight, organ weight (liver, epididymal fat, and BAT) compared with control HF group. The ARAC group had markedly lower serum levels of adiponectin when compared with HF group. Also the epididymal white adipocyte size of ARAC group were diminished comparing to the HF group. These results suggest that the possibility of ARAC combination, as an antiobese formula, by suppression of body weight gain and increased lipid profiles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.280-285
• /
• 2012

The 1st assessment (performance test) was applied to assure the floor impact sound performance for developing the dry double- floor with the change of rubber hardness of the upper panel's support and the ceiling structure of the sub-floor. Depends on the change of the rubber hardness in substructure, the heavy-weight sound impact value is improved up to 3 dB, and the light-weight sound impact value is moved up to 21 dB, comparing with the bare-slab. Also, the improved value for the floor impact sound conjugating with the sub-floor's ceiling was 5dB. Based on this result, the 2nd assessment (performance test) was made the state that the rubber hardness of the sub-floor support was ranged between 50 and 70 for considering the stability of walking patients. In addition to this process, the assessment was carried out with a variety of ceiling structure applied to the dry doublefloor structure with the air flow system on the sub-floor's ceiling. The result for the 2nd assessment proved that TYPE-11 had the better sound reduction performance in the heavy-weight impact sound test than other types, and also for the light-weight impact sound TYPE-11 had the 29 dB sound reduction performance overall. Henceforth, based on the result the research for the sound reduction performance from the floor impact sound shall be ongoing process as well as the development of a double-dry floor and a sound reduction ceiling to suitable on the field.

• The Korean Journal of Health Service Management
• /
• v.1 no.1
• /
• pp.125-137
• /
• 2007

The current hospital industry is showing relatively low profitability in comparison with other industries due to the low medical fees and high costs. Therefore, our government presented the direction of improvement through model execution and support of the specialized hospitals. However, it is estimated that the specialized hospitals also will show differentiated management performances in accordance with their specialized fields due to the characteristics of medical treatment. Therefore, this study had attempted an analysis on the financial index in accordance with the weight of medical treatment items for the rehabilitative medicine department among the whole hospital groups through getting out of analyzing financial indices of individual hospitals centered at their costs. For this p개pose, this study had carried out its research by partially reciting the study on the plan for utilizing participations of private health resources to expand rehabilitative medicine services into the private people of the Korea Health Industry Development Institute(KHIDI). As its results, it was shown that the stability, profitability, activity and productivity of hospitals with high weight of medical treatment for the rehabilitative medicine department were lower than those for the general hospitals. To support smooth operations of these hospitals 'with high weight of medical treatment for the rehabilitative medicine department or of specialized rehabilitation hospitals, it is judged that the plan such as the support for hospital management fund and the additional recognition on the rehabilitative fees, etc. together with the actualization of medical fees must be provided for the institutions which are providing rehabilitative medical services more than the fixed percentage and being equipped with the sufficient medical equipment and personnel to do them.

• Physical Therapy Korea
• /
• v.28 no.3
• /
• pp.215-226
• /
• 2021

Background: Robot-assisted gait training (RAGT) is an effective method for walking rehabilitation. Additionally, the body weight support (BWS) system reduces muscle fatigue while walking. However, no previous studies have investigated the effects of RAGT with BWS on isokinetic strength of quadriceps and hamstring muscles. Objects: The purpose of this study was to investigate the effects of torque, work, and power on the quadriceps and hamstring muscles during RAGT, using the BWS of three conditions in healthy subjects. The three different BWS conditions were BWS 50%, BWS 20%, and full weight bearing (FWB). Methods: Eleven healthy subjects (7 males and 4 females) participated in this study. The Walkbot_S was used to cause fatigue of the quadriceps and hamstring muscles and the Biodex Systems 4 Pro was used to measure the isokinetic torque, work, and power of them. After RAGT trials of each of the three conditions, the subjects performed isokinetic concentric knee flexion and extension, five at an angular velocity of 60°/s and fifteen at an angular velocity of 180°/s. One-way repeated analysis of variance was used to determine significant differences in all the variables. The least significant difference test was used for post-hoc analysis. Results: On both sides, there were significant differences in peak torque (PT) of knee extension and flexion between the three BWS conditions at an angular velocity of 60°/s and 180°/s conditions. A post-hoc comparison revealed that the PT in the BWS 50% was significantly greater than in the BWS 20% and the FWB and the PT in the BWS 20% was significantly greater than in the FWB. Conclusion: The results of this study suggest that the lower BWS during RAGT seems to lower the isokinetic torque, work, and power of the quadriceps and hamstring muscles because of the muscle fatigue increase.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.753-756
• /
• 2005

Rapid prototyping (RP) technologies are mainly performed by layered manufacturing (LM) process which manufactures 3D physical objects by depositing 2D sections in a direction. Thus, deformations are apt to occur in overhanging area of the RP processed part. Also, excessive adhesion between part and platform of the RP apparatus is generated. In order to prevent these problems, most of the RP technologies adopt support structure. Main element to support a part in the support structure is strand. In actual field, however, the number of strand is determined by the software operating reference guide or RP system operator's experience. In this paper, a methodology to determine the optimal strand spacing is presented through experiments and measurements for the SL part deformation by change of strand spacing and part weight in the support structure of the stereolithography.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.76-80
• /
• 2000

The purpose of this study is to compare the performance of rubble support media coated perlite and non-coated media. As rubble was coated perlite, the porocity of reactor was increased 5.6%, whereas packing weight was decreased 17.6%. When rubble was coated perlite, microorganisms were attached on the surface of support media after 2 hours. TCOD removal efficiency of the reactor packed with rubble support media coated perlite was higher 4~9% than that of rubble. The end of experiment, MLVSS of rubble support media and rubble coated perlite was 1858.8mg/ι, 2785.9mg/ι, respectively.

• Journal of Family Resource Management and Policy Review
• /
• v.18 no.3
• /
• pp.1-20
• /
• 2014

This study explores the grandchild-rearing experience of grandmothers whose children are part of dual-earner couples. Twelve participants provided in-depth interview data that were analysed according to Spradely's ethnographic method. We present three main themes in our research, as well as ten smaller themes: (i) the grandchild-rearing motive (from the perspective of the adult, the child, the grandchild, and the grandmother); (ii) the mode of grandchild-rearing support (residential, total weight of childrearing support, availability of a daycare center); (iii) the change in the grandmother's way of life (positive changes and negative changes). Finally, this study examines the integrity of the grandmother's identity as their productivity increases through providing grandchild-rearing support. It also looks at the importance of governmental policies that support their burdens according to the level support they provide.