• Journal of Applied Biological Chemistry
• /
• v.52 no.1
• /
• pp.8-14
• /
• 2009

This study was conducted to assess the effects of diet food containing Jerusalem artichoke's inulin, lotus leaf, and herb on weight and body fat. Participants in this study were selected based on the following criteria: BMI over $25kg/m^2$, body fat percentage higher than 25%, abdominal obesity level of 0.85 measured by body composition measurement unit (ZEUS 9.9 PLUS, Korea) total 24 female and male university students over 20 of age were assigned to two different groups: control group and diet group and the study was carried out for 30 days. When we measured what the tester's body weight and height, we used an automatic measure machin which is called IMI-1000 from Immanuel company and when we measured what the hip and wist circumference, we used a tape measure. When we measured body mss index (BMI), body Int, body mass, lean mass, waist/hip ratio (WHB), obesity index, we used a ZEUS9.9 PLUS-Korea which is based on bioelectrical impedance analysis, The food intake was checked by means of diet record method to be input into CAN program in order to analyze nutrient intake. Our findings indicated that the diet group, as compared to the control group, lost weight of approximately 2.5 kg and showed statistically significant difference. In addition the level of body Int, muscle, abdominal obesity, obesity, waist and bottom measurement all showed significant decrease after study period. However, there was no big difference in body fat percentage because both body fat level and muscle level dropped together, Putting all these together, diet food in this study containing Jerusalem artichoke's inulin, lotus leaf powder, and herbs powder including nettle, eucalyptus was found to be effective in significant reduction of weight and body fat and obesity-related body indicators. Also, it is considered that this diet food has potential to prevent and improve effectively obesity from abnormal fat accumulation.

• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.33-39
• /
• 2010

This study is to reduce the rate of drowning accident by using of buoyancy bag. People are exposed to the high risk of drowning accident when they have water leisure activities due to the lack of safety mind-set and shortage of safety products. In case of drowning accident, the rescue action is normally depending on the other people's assistance. Therefore, rescue activities which relyn the people doesn't improve the ratio of survival in the drowning accidents. The submarine specialists should use the buoyancy products to rescue the people in the drowning accident. The citizen can carry portable buoyancy product in the automobile as well as by hands anywhere and anytime. It will be effective rescue tool to save his/her life in the emergency. In addition, it will contribute to rescue other's life because it can be used immediately. There are 3 positive characteristics on the buoyancy bag. First, it is convenience. Documents and other stuffs can be kept in the bag. Second is safety. The material of buoyancy is placed in the inner of the bag. It is possible to float the person whose weight is 90 kg. Lastly, it is durability. It can be used long-term because the outer of the bag is made of anti-water material and anti-water zipper. As a result of performance analysis, it is evident that the buoyancy bag can be used to rescue the people in the drowning accident as a indirect rescue tool compared with the current other rescue products. It is recommended that the design of outer box and performance of buoyancy are required to be improved in order to contribute more to rescue people in the accident.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.2
• /
• pp.80-85
• /
• 2002

This study was conducted to investigate the effects of night illumination on the growth and yield of sesame(Sesamum indicum) and perilla(Perilla frutescens). Stem length and height of the first pod in sesame increased, whereas number of branch was reduced and flowering date and maturing date delayed as light intensity of night illumination increased. Number of capsules per plant, ripening ratio and seed yield of sesame were reduced as light intensity of night illumination increased. Yield reduction was greater in Ahnsankkae than in Sodunkkae. Number of nodes increased under night illumination in perilla. Two test cultivars showed reduction in number of branch at 6~10 Lx(22 ㎽ m$^{-2}$ ) intensity of night illumination, even though there was a variation between cultivars. Perilla was sensitive to night illumination far flowering and ripening. Flowering date was delayed by 21 to 28 days at 6~10 Lx intensity of night illumination. Number of flower clusters, number of seeds per flower cluster, and 1,000-seed weight in perilla were significantly reduced and seed yield was reduced by 89 to 98% at 6-10 Lx intensity of night illumination.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.852-862
• /
• 2003

An experiment was conducted to study the effect of ionophore enriched cold processed mineral block supplemented with urea molasses on microbial growth and rumen fermentation. Twelve adult male crossbred cattle were divided into four groups on body weight basis. Animals were given wheat straw as a basal diet. The animals of group I and II were supplemented with concentrate mixture and animals of group III and IV were supplemented with cold processed urea molasses mineral block (UMMB). Thirty mg monensin/day/animal were supplemented to the animals of group II and 35 ppm monensin were incorporated in the UMMB supplemented to the animals of group IV. Dry matter (DM) intake did not differ significantly among groups. Mean rumen pH was higher in UMMB fed animals. Total volatile fatty acids (TVFA) concentration (mmole/L strained rumen liquor (SRL) in group III (113.19) was significantly (p<0.05) higher than those of group I (105.83) and II (108.74) but similar to group IV (109.34). TVFA production (mole/day) was similar in all the groups. The molar proportion of acetate was significantly (p<0.01) higher in the group I (59.56) than those of group II (51.73) and IV (55.91) but similar to group III (57.12). The molar proportion of propionate was significantly (p<0.01) higher in the monensin treated groups i.e. group II (38.38) and IV (36.26) than those of group I (27.78) and III (33.06). Butyrate molar percent was significantly (p<0.01) higher in group I (12.65) than those of group II (10.19), group III (9.83) and IV (7.84). The reduction of acetate and butyrate was due to UMMB and monensin resulted in lower A:P ratio. Average bacterial pool and bacterial production rate did not differ significantly among groups. Total N concentration (mg/100 ml SRL) was significantly (p<0.01) higher in the group I (55.30) and III (57.70) as compared to the group II (47.97) and IV (47.59). Ammonia-N concentration (mg/100 ml SRL) of group III (34.99) was significantly (p<0.01) higher than that of the group I (25.76) which was again significantly (p<0.01) higher than that of the group II (20.79) and IV (19.83) indicating slower release of ammonia due to monensin in diet. Total bacterial, cellulolytic, proteolytic bacterial and fungal count at 4 h post feeding did not differ significantly (p<0.05) among treatment groups. However, methanogenic bacterial count was significantly (p<0.01) higher in the group I (11.80) compared to the group II (8.43) which was significantly (p<0.01) higher than that of the group III (4.70) and IV (2.90). Average protozoal population was affected by both treatments. Thus feeding of UMMB and monensin in diet affected the rumen fermentation pattern towards propionate production, slower release of ammonia and reduction in methanogenic bacteria in the rumen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.604-609
• /
• 2020

There are various methods of finishing concrete surfaces, and when considering workability, the spray method is effective, but rebound occurs. The allocation of rebound occurrence control should be adjusted according to the materials used. Thus, a basic study was conducted on multiple techniques for reducing the rebound incidence that are suitable for surface finishing materials containing a photocatalyst. A prior study derived the reduction effect and optimal mix ratio for photocatalytic performance. Based on that study, the rebound reduction was verified according to the specifications of the content and the mechanical durability characteristics of the mixed materials. Rebound, compressive strength, flexural rigidity, and table flow tests were done. The flow was fixed at 170±10 mm considering the workability of the mortar spray equipment. For the experimental variables, the rebound number was adjusted to the silica sand variables relative to the cement weight, and silica sands No. 5 and No. 7 were used. The results show the highest compression strength in the final S-1 variable, and the amount of rebound was minimized. These results were sufficiently filled with the bindings of the silica pores, which increased the binding force between the aggregates, resulting in a lower amount of rebound.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.140-145
• /
• 2015

This study was aimed at analyzing NOx conversion characteristics in the HC-SCR with biodiesel content changes of the secondary fuel injection (BD0, BD10, BD25). Test conditions for temperature were set to $290^{\circ}C$, $320^{\circ}C$ and $350^{\circ}C$ considering the upstream temperature of a HC-SCR, distillation of the secondary injected fuels and etc. The amount of fuel injection was adjusted with a fixed space velocity of 55,000(1/h). According to the test results of distillation, the T90 was the same level about $350^{\circ}C$ on all test fuels and the amount of evaporation was reduced at lower than $350^{\circ}C$ temperature condition with increasing biodiesel content. As biodiesel content which is mixed with the secondary injected fuel is increased, NOx reduction efficiency was determined to decrease. The difference of the Nox reduction ratio in a high temperature condition($320^{\circ}C$ and $350^{\circ}C$) than the low temperature($290^{\circ}C$) was more significant. These results are thought to be poor evaporation properties (distillation) and high molecular weight of the biodiesel.

• Journal of Photoscience
• /
• v.12 no.1
• /
• pp.17-23
• /
• 2005

Application of a new photocatalyst has been attempted to improve the efficiency and rates of photocatalytic degradation of azo dyes by using a model dye such as Methyl Orange. As a new photocatalyst, $TiO_2$ encapsulated EFAL-removed zeolite Y ($TiO_2$ /EFAL-removed zeolite Y) has been synthesized by ion-exchange in the mixture of EFAL-removed zeolite Y with 0.05 M aqueous [$(NH_4)_2 TiO(C_2O_4)_2.H_2O$] [$TiO(C_2O_4)_2.H_2O$]. This new photocatalyst has been characterized by measuring XRD, IR and reflectance absorption spectra as well as ICP analysis, and it was found that the framework structure of $TiO_2$ /EFAL-removed zeolite Y is not changed by removing the extra-framework aluminum (EFAL) from the normal zeolite Y and the $TiO_2$ inside the photocatalyst exists in the form of $(TiO^{2+})_n$ nanoclusters. Based on the ICP analysis, the Si/Al ratio of the $TiO_2$ /EFAL-removed zeolite Y and the weight of $TiO_2$ were determined to be 23 and 0.061g in 1.0g photocatalyst, respectively. It was also found that adsorption of the azo dye in the $TiO_2$ /EFAL-removed zeolite is very effective (about 80 % of the substrate used). This efficient adsorption contributes to the synergistic photocatalytic activities of the $TiO_2$ /EFAL-removed zeolite by minimizing the required flux diffusion of the substrate. Thus, the photocatalytic reduction of methyl orange (MO) was found to be 8 times more effective in the presence of $TiO_2$ /EFAL-removed zeolite Y than in the presence of $TiO_2$ /normal zeolite Y. Furthermore, the photocatalytic reduction of MO by using 1.0 g of the $TiO_2$ /EFAL-removed zeolite Y containing 0.061g of $TiO_2$ is much faster than that carried out by using 1.0 g of Degussa P-25.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.173-181
• /
• 2021

Reinforced concrete structures are exposed to various environments, resulting in reinforcement corrosion due to moisture and ions penetration. Reinforced concrete corrosion causes a decrease in the durability performance of reinforced concrete structures. One solution to mitigate such issues is using FRP rebars, which offer several advantages such as high tensile strength, corrosion resistance, and light-weight than conventional rebars, in reinforced concrete instead of conventional steel rebars. The FRP rebar used should be examined at the limit state because FRP reinforced concrete has linear behavior until its fracture and can generate excessive deflection due to the low elastic modulus. It should be considered while designing FRP reinforced concrete for flexure. In the ultimate limit state, the flexural strength of FRP reinforced concrete as per ACI 440.1R is significantly lower than the flexural strength by applying both the environmental reduction and strength reduction factors accounting for the material uncertainty of FRP rebar. Therefore, in this study, the experimental results were compared with the deflection of the proposed effective moment of inertia referring to the local and international standards. The experimental results of GFRP and BFRP reinforced concrete were compared with the flexural strength as determined by ACI 440.1R and Fib bulletin 40. The flexural strength obtained by the experimental results was more similar to that obtained by Fib bulletin 40 than ACI 440.1R. The flexural strength of ACI 440.1R was conservatively evaluated in the tension-controlled section.

• Journal of Nutrition and Health
• /
• v.57 no.2
• /
• pp.196-210
• /
• 2024

Purpose: This study investigated the anti-obesity effects of a combination of Syzygium aromaticum L. and Sorbus commixta Hedl. (SS) in vitro and in vivo. Methods: The extracts of Syzygium aromaticum extract (SA) and Sorbus commixta extract (SC) were prepared individually using distilled water. They were mixed in a 1:2 ratio for use in the experiment. To assess the anti-obesity potential of SS in vitro, we examined cell proliferation, cellular triglyceride (TG), and total cholesterol (TC) levels, as well as lipogenesis and β-oxidation in 3T3-L1 cells. To confirm its anti-obesity potential in vivo, C57BL/6J mice were fed a 60% high-fat diet (HFD) to induce obesity. SA alone, SC alone, and their combination compound, SS (at a dosage of 200 mg/kg) were orally administered for 6 weeks. Thereafter, to conduct a comparative evaluation, serum analysis, western blotting of liver tissues, and histopathological analysis were performed. Results: Both SS200 and SS400 significantly inhibited the cellular TG and TC contents in the 3T3-L1 cells. Furthermore, treatment of the cells with SS (at a dose 200 and 400 ㎍/mL) also led to a noticeable regulation of key lipogenic and β-oxidation factors. Treatment of obese mice with SS resulted in a greater reduction in serum leptin and TG levels compared to treatment with the individual compounds (SA and SC). Furthermore, activation of AMP-activated protein kinase α by SS treatment resulted in the suppression of sterol regulatory element-binding proteins (SREBP)-1, leading to the inhibition of acetyl-CoA carboxylase (ACC) expression. Conclusion: Our results suggest that SS may have the potential to prevent obesity through a reduction in the TG and TC levels and regulation of lipogenesis and β-oxidation.

• Journal of Korean Medicine for Obesity Research
• /
• v.24 no.1
• /
• pp.87-93
• /
• 2024

Objectives: Obesity is a globally prevalent public health issue. Hence, there is a need for the development of safer and more effective anti-obesity drugs. Lythrum salicaria, a traditional medicinal herb used for centuries, has been reported to improve lipid metabolism and fat accumulation. It also has a low toxicity profile. Therefore, its potential as a functional ingredient in health functional foods needs to be evaluated. Methods: In this randomized, double-blind, placebo-controlled clinical trial, 90 participants will be randomly assigned to either the experimental or control group. Each subject will orally receive L. salicaria extract (1,350 mg/day) (500 mg L. salicaria+850 mg lactose as vehicle) or lactose (1,350 mg/day) as a hard capsule formula for 84 days (12 weeks). The primary outcome will be body fat mass (kg), which will be assessed using dual-energy x-ray absorptiometry (DXA) (performed only at visits 2 and 4). Secondary outcomes include body mass index, body weight, waist-to-hip ratio, body fat percentage (%) measured using DXA, lean body mass (kg) measured using DXA (assessed only at visits 2 and 4), lipids (total cholesterol, triglyceride, high-density lipoprotein cholesterol, and calculated low-density lipoprotein cholesterol), free fatty acid, high sensitivity C-reactive protein, adiponectin, and leptin. Conclusions: This protocol will be implemented after approval of Institutional Review Board of Pusan National University Korean Medicine Hospital (approval number: PNUKHIRB-2022-08-002) and registration with the Korean National Clinical Research Information Service (CRIS) (CRIS-KCT0008060). The results of this trial will provide potential of L. salicaria as a new anti-obesity functional food with fat-reducing effects and low toxicity.