• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.66-75
• /
• 2000

The purpose of this study is to develop and illustrate methods of applying trade-off techniques to landing craft air cushion design evaluation. The problem areas of concern are the application of quantitative analytical methods to conceptual design. The interrelationships between composite system measures and selected performance requirements(speed, cruising range, cargo etc.) are analyzed and the expressions for gross weight are developed as functions of performance parameters. Trade-offs of performance parameters in terms of weight are then calculated. The application of these results to evaluation of Require Operational Capabilities are illustrated.

• 대한조선학회지
• /
• 제17권4호
• /
• pp.46-54
• /
• 1980

The ship structural design problem is formulated as a general nonlinear optimization problem with constraints. Characteristics of the general structural problems and various optimization techniques are discussed, with special emphasis on penalty function method for constrained problems. A simple example of the solution of a midship structure design of cargo vessel, which complies with the rules of the Korean Register of Shipping is shown using SUMT-exterior method with some search methods.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.250-251
• /
• 2023

팔레트는 낱개의 여러 화물을 동시에 묶어 운송할 수 있게 하는 하역 장비로써 원자재 조달에서부터 소비자에게 전달되기까지의 흐름을 통합적으로 연결하는 중요한 요소이다. 더불어 일관수송을 통한 비용 절감, 거래단위의 표준화, 운송수단의 효율적인 운영, 하역작업 개선을 목적으로 팔레트 표준화가 활발히 진행됨에 따라 T-11형, T-12형 등의 표준 팔레트가 우리나라 물류 산업 전반에 걸쳐 사용되고 있다. 그러나 대형·중량화물을 비롯한 특수화물의 경우, 크기 및 중량 등의 이유로 표준 팔레트에 적재하는 것이 불가능하기에 대부분 자체 팔레트를 개발하여 사용하고 있다. 본 연구는 다양한 특수화물을 취급하는 팔레트의 크기를 결정하는 문제로써, 특수화물의 종류, 크기 및 중량, 보관 수량 등을 고려하여 최적 팔레트 크기를 산출하고자 한다. 이를 위해, 이웃해 탐색 알고리즘을 변형하여 전역 최적해를 찾을 수 있는 최적화 기법을 제안하였으며, 입력 데이터로서는 특수화물의 종류별 제원 및 보관 수량 정보, 제약조건 관련 정보가 사용되었다. 또한, 특정한 특수화물을 대상으로 최적화 시뮬레이션을 수행하여 최적해 도출 여부를 확인함으로써 본 최적화 기법의 최적성을 검증하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제18권1호
• /
• pp.9-16
• /
• 2021

Overloaded vehicles increase the maintenance cost of road structures, and they are a major factor in causing damage to the roads and bridges. In addition, overloaded vehicles compromise the braking capability of the vehicle; thus, threatening the safety of the driver. In order to prevent overloading of vehicles, the government is cracking down on the roads by using a device that measures the weight of vehicles. But this process is inconvenient because the place where the equipment is installed is far away from where the cargo is loaded. Due to the limitations of these fixed weighing devices, there is a growing need for technology that can monitor vehicle weight distribution and overload conditions in real time. In this work, we develop an onboard scale that can measure the load (weight) of trucks in real time. The onboard scale consists of high sensors, a signal processing unit, and a display, and it measures the load using height-displacement of the vehicle's leaf spring suspension.

• 무역상무연구
• /
• 제58권
• /
• pp.127-148
• /
• 2013

The Rotterdam Rules provide that port terminal operator may avoid or limit their liability for cargo loss, damage or delay in delivery or breach of any other obligation under the Rules by invoking the provisions that may provide a defence for, or limit the liability of, the carrier. Consequently the port terminal operator who are involved in the provision of maritime services may avoid or limit their liability for cargo loss, damage or delay in delivery or breach of any other obligation under the Rules. The port terminal operator to be applied for the Himalaya clause under the Rules must show that it has the requisite link with a Contracting State. In addition, the port terminal operator performs service to the period of time between the arrival of the goods at the port of loading and their departure from the port of discharge. The port terminal operator's liability for breaches of its obligation is limited to 875 SDR per package or other shipping units, or 3 SDR per kilogram of the gross weight of the goods. In addition, compensation for delay shall be limited to an amount equivalent to two and one-half times the fright payable on the goods delayed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.62-67
• /
• 2004

Many ships in voyage experience weight and buoyancy distribution change by various reasons such as change of sea water density and waves, weather condition, and consumption of fuel, provisions, etc . The weight and buoyancy distribution change can bring the ships out of allowable trim, heeling angle. In these case, the ships should adjust trim and heeling angle by shifting of liquid cargo or ballasting, deballasting of ballast tanks for recovery of initial state or for a stable voyage. But, if the adjustment is performed incorrectly, ship's safety such as longitudinal strength, intact stability, propeller immersion, wide visibility, minimum forward draft cannot be secured correctly. So it is required that the adjustment of trim and heeling angle should be planned not by human operators but by optimization computer algorithm. To make an optimized plan to adjust trim and heeling angle guaranteeing the ship's safety and quickness of process, Uk! combined mechanical analysis and optimization algorithm. The candidate algorithms for the study were heuristic algorithm, meta-heuristic algorithm and uninformed searching algorithm. These are widely used in various kinds of optimization problems. Among them, heuristic algorithm $A^\ast$ was chosen for its optimality. The $A^\ast$ algorithm is then applied for the study. Three core elements of $A^\ast$ Algorithm consists of node, operator, evaluation function were modified and redefined. And we analyzed the $A^\ast$ algorithm by considering cooperation with loading instrument installed in most ships. Finally, the algorithm has been applied to tanker ship's various conditions such as Normal Ballast Condition, Homo Design Condition, Alternate Loading Condition, Also the test results are compared and discussed to confirm the efficiency and the usefulness of the methodology developed the system.

• 도시과학
• /
• 제11권2호
• /
• pp.45-54
• /
• 2022

Recently, regulations on automobile exhaust gas emission are being strengthened. Accordingly, automobile exhaust gas emissions are expected to decrease and continue to decrease. On the other hand, many countries do not yet consider the emission of non-exhaust air pollutants from automobiles as important. Automobile non-exhaust substances are classified into three categories: tire dust emissions, brake wear emissions, and road scattering dust. In particular, in the case of tire dust, research results exist that pollutant emissions increase as the weight of a vehicle increases. Since the weight of trucks varies according to the load and the load along the axles is also different, it can be expected that the emission of PM10 from the tire dust will be different depending on the loading method. Therefore, this study was conducted on the amount of PM10 generated in tire dust considering the axle load of the truck according to the loading method. However, it was confirmed that the total amount of PM10 was less than that all loads are loaded in the front or rear when the load was evenly distributed in the front and rear of the cargo compartment. In particular, if the load is distributed evenly in the front and back of the cargo compartment and the load in the front part is divided into 2 to 6 and loaded, as the number of divided loading increases the amount of PM10 generated decreases. And when the load is divided into 6 pieces, the total amount of PM10 generated is 0.3952g, the minimum value. If the load is divided into 6 or more and loaded evenly, the total PM10 generated continuously increases and converges to about 0.3964g.

• 항공우주시스템공학회지
• /
• 제17권2호
• /
• pp.111-119
• /
• 2023

본 논문에서 제안하는 스토리지 박스의 내부 상황에 대한 실시간 식별 시스템은 오버헤드 빈의 내부 보관 상태, 무게 정보 및 무게 중심 계산 값을 시각화하는 시스템이다. 제안된 시스템은 로드 셀과 스위치 어레이를 사용하여 각 측정값을 동기화하고 시각적 센서를 통해 의미 있고 필요한 정보를 제공한다. 이 시스템은 C 언어 기반 임베디드 시스템으로 구축되며 1) 내부 가용공간 파악, 2) 무게중심 계산, 3) 실시간 시각 정보 제공이 주요 기능이다. 이러한 기능을 통해 스마트 오버헤드 빈을 개발하고, 향후 화물 적재 자동화 시스템 개발에 기여할 수 있는 실시간 화물 적재 모니터링 기술을 개발하였다.

• 한국항만학회지
• /
• 제12권1호
• /
• pp.25-33
• /
• 1998

The evaluation of port competition could be applied to determining the selection of a calling port. A few fundemental attributes of port competition were adapted by the 'brain storming' method. The criteria used for evaluating a port's competitiveness were as follows: efficiency of port operations, competitive power of each port's industry, economic activity of the hinderland associated with each port and capability of globalization. The weight of each criterion was 30%, 40%, 20% & 10%, respectively. And the most important factors that were considered in choosing each of the above criteria were profitability, port information system, cargo volume & inducement of foreign capital. The results of this study seemed to suggest that factors which influence port competition varied according to port circumstances, such as computer and communication systems and access to the global trade within the World Trade Organization

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.187-196
• /
• 2010

본 논문의 목적은 장기적인 차량중량자료의 획득을 위하여 설치된 Weigh-In-Motion(WIM)시스템의 정확도를 개선하기 위한 온도영향 보정기법을 개발하는 것이다. 이를 위해 국내 교통량통계연보에 근거하여 중차량교통량이 많은 지역 중 한 곳을 선정하고 WIM 시스템을 설치하여 2010년 1월부터 차량의 중량자료를 획득하였다. 본 연구에서는 획득한 자료 가운데 5월부터 8월까지의 WIM 자료에 대하여 온도에 따른 영향을 보정하기 위하여 화물적재량에 따른 영향을 가장 덜 받아 상대적으로 일정한 중량값을 나타내는 10종 차량(5축 세미트랙터트레일러)의 첫 번째 축의 중량자료를 이용하였다. 이로부터 일평균, 최대 및 최저기온에 따른 보정식을 개발하였다. 마지막으로 새로 얻어진 차량중량자료를 분석하여 보정방법의 적정함을 나타내었고 재현주기별 극한하중 예측을 통해 보정 전,후의 자료값의 차이를 비교하였다. 이 연구의 결과는 WIM system으로 얻게 되는 장기적인 차량중량자료의 정확도를 향상시킴으로써 도로포장 설계 및 교량설계를 위한 설계차량활하중모형의 합리적인 선택에 기여할 것으로 판단된다.