• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.205-215
• /
• 2010

The purposed of this study was to examine the relation between dental hygienists' treatment posture and body pain by surveying 120 dental hygienists working at dental hospitals and clinics in Busan and to suggest desirable treatment postures and pain prevention methods for dental hygienists' health and job performance. Data obtained from the questionnaire survey were analyzed using SPSS 18.0 for Windows. The taller the hygienists were the less pains they had in their 'back' and 'hips' (p<0.05). The shorter the hygienists were the more pains they had in their 'back,' 'waist,' 'hips,' 'legs' and 'ankles/feet'(p<0.05). There was no difference in pains in each body part according to weight. In the results of analyzing correlations among pains in different body parts, a very strong positive correlation was observed between the pains in the 'knees' and 'legs' (r=0.71)(p<0.01). The hygienists of 56.7% had experience in education on treatment posture, and 62.5% were not doing exercise regularly. To the question on what should be done for health welfare in their workplace, the hygienists of 47.9% mentioned improvement in the environment of the workplace.

• Child Health Nursing Research
• /
• v.26 no.2
• /
• pp.181-189
• /
• 2020

Purpose: This study explored the relationships of maturity fears and appearance interest(interest in appearance, interest in weight) with self-concept among girls with precocious puberty. Methods: The participants for this study were 120 elementary school students (8 to 10 years old) and their parents from two hospitals located in Chungcheong Province. Data were collected from January to February 2019 using self-reported questionnaires. The collected data were analyzed using descriptive statistics, the independent t-test, the Mann-Whitney U test, one-way analysis of variance, Pearson correlation coefficients, and multiple regression analysis in SPSS for Windows version 23.0. Results: Statistically significant negative correlations were found between self-concept and maturity fears (r=-.34, p<.001) and interest in weight (r=-.29, p=.001). Maturity fears were identified as a factor affecting the self-concept of girls with precocious puberty (β=-.34, p<.001). This variable explained 11.5% of the variance in the self-concept of girls who experienced precocious puberty. Conclusion: This study confirmed that maturity fears had a major influence on self-concept in girls with precocious puberty. The results of this study can be used as basic data for the development of a psychosocial nursing intervention program for girls who experience precocious puberty.

• Herbal Formula Science
• /
• v.22 no.2
• /
• pp.45-54
• /
• 2014

Objectives : The main objective of this study is to classify herbal components to 4 groups which are similar to Gunsinjwasa grades by using herbal composition ratio of prescription. Another objective is to design the searching system which compares prescriptions and improves efficiency with 4 groups like Gunsinjwasa grades. Methods : This study was proceeded with Acess 2007 on Microsoft Windows 7 and we created composition ratio based on weight by using prescriptions of Donguibogam, Uihagipmun and Banghakhabpyun. We could make comparison and searching method of prescriptions. Results : We could search using composition ratio degree of herbs which composes prescription. And the similarity comparison of prescription was possible with value from 0 to 10. Conclusions : We could increase the accuracy of the searching prescriptions and comparison with putting into the information about composition degree and composition ratio of herbs which compose a prescription.

• Korean Journal of Remote Sensing
• /
• v.6 no.2
• /
• pp.115-133
• /
• 1990

Study was made on the spectral characteristics of rock samples including bentonites collected from the northern Ulsan area. The geology of the area consists mainly of sediments of the Kyongsang Series and Bulguksa granite, the Tertiary volcanics, andesites and tuffs. Relative reflectances of meshed samples(2.5~10mm) to BaSO$_4$ are measured at 6 Landsat TM spectral windows (excluding the thermal band) with HHRR, and their reflection charactristics were analysed. In addition, three different data selection schemes including the Eulidean distance, multiple regression, and PCA weight methods were applied to the 30 TM ratio channels, derived from the above 6 bands. The selected data sets were subject to two unsupervised classification techniques(FA and ISODATA) in order to compare the effectiveness for classification of particularly bentonite from others. As a result, in ISODATA analysis the multiple regression model shows the best, followed by the Euliean distances one. The PCA weight model seems to show some confusion. In FA, though difficult for quantitative analysis, the best still seems to be the regression model. Among ratio bands, rations of band 7 or 5 against other bands represent the best contribution in classification of bentonites from others.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.2
• /
• pp.25-34
• /
• 2007

Existing approaches that select an order for the join of three or more data streams have always used the simple heuristics. For their disadvantage - only one factor is considered and that is join selectivity or arrival rate, these methods lead to poor performance and inefficiency In some applications. The graph-based sliding window multi -join algorithm with optimal join sequence is proposed in this paper. In this method, sliding window join graph is set up primarily, in which a vertex represents a join operator and an edge indicates the join relationship among sliding windows, also the vertex weight and the edge weight represent the cost of join and the reciprocity of join operators respectively. Then the optimal join order can be found in the graph by using improved MVP algorithm. The final result can be produced by executing the join plan with the nested loop join procedure, The advantages of our algorithm are proved by the performance comparison with existing join algorithms.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.3
• /
• pp.273-284
• /
• 2007

Oral health in youth is very important because this period influences life for adult remarkably. Therefore, more effective oral health education and recognition of early treatment for oral disease are required sincerely. For more effectual education for high-school students, it is necessary to consider their circumstance like obesity and smoking. This study will analyze the correlation oral health behavior with obesity and subjective oral health concerns. In addition to, the actual condition of smoking for high-school girls and oral health condition will be verified. A survey was progressed for high-school girls in Busan city and BMI(body mass index) was used for classification of weight. The statistical significance was analyzed using SPSS 13.3 for Windows. Results of this study is following. 1. The frequence of daily toothbrushing was significantly different with obesity although difference of oral health knowledge was not significant. The frequency of toothbrushing of overweight students were lesser than the others. This results may be caused by low-level for oral health concerns and by passive life style of fat person. This habit has possibility of causing serious periodontal disease like periodontitis and tooth caries. 2. The correlation of obesity and time of brush change, using for supplement, and recent dental institution was insignificant. However, concerns of oral health were showed significantly according to obesity. Under-weight and standard-weight students were more concerned about oral health than over-weight. This results can be related to frequence of toothbrushing for fat subject. This relevance of two factors was confirmed by logistic regression analysis. 3. Approximately 70% students have smoking experience responded to uncomfortableness of periodontal conditions. On the other hand, non-smoking students felt uncomfortable in 50%. This results indicated that smoking have an effect on oral health condition. Further study which identify periodontal conditions practically has to go on for verification of direct correlation smoking and oral health.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2069-2076
• /
• 2008

In this paper, we develop an electrostatic monitoring system which is composed of an electrostatic prediction system and a warning message transmission system. The electrostatic prediction system in a factory receives the value of electrostatic charge from the electrostatic sensor and predicts the next value by using past data and sends the value to the warning message transmission system through the bluetooth communication. The warning message transmission system gets a warning signal and transmits the warning message to the worker's cellphone through a commercial SMS web by a socket program running on Windows PC in a control room. We propose electrostatic forecasting algorithms based on LSR(least square regression) using weight factors in an electrostatic prediction system. Simulation results show that the algorithm with dynamically variable weight factors is best with 64.69V standard deviation and a warning message transmitted by the warning message transmission system is displayed on cellphone after about 5 seconds.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.591-594
• /
• 2000

In the recent day, fatigue life prediction techniques play a major role in the design of components in the ground vehicle industry. Full scale durability testing in the laboratory is an essential of any fatigue life evaluation of components or structure of the automotive vehicle. Component testing is particulary important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, 3-axis durability testing device is used to carry out the fatigue test. In this paper, The operation software for simultaneously driving 3-axis vibration testing device is developed and the displacement of the 3-axis actuator is separately calibrated by LDT Moreover, the input and output data are displayed in windows of PC controller with real time.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.143-151
• /
• 2001

In the recent day, fatigue life prediction techniques play a major role in the design of components in the ground vehicle industry. Full scale durability testing in the laboratory is an essential of any fatigue life evaluation of components or structure of the automotive vehicle. Component testing is particularly important in todey's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, Multi-axis durability testing device is used to carry out the fatigue test. In this paper, The operation software for simultaneously driving Multi-axis vibration testing device is developed and the input and output data are displayed in windows of PC controller with real time. Moteover the characteristics of the displacement and the load of Multi-axis actuators are calibrated separately.

• Transactions of Materials Processing
• /
• v.3 no.3
• /
• pp.271-281
• /
• 1994

Titanium-6242 $({\alpha}+{\beta})$ alloy has been used for aircraft engine components such as disks and blades, because it has an excellent strength/weight ratio at high temperatures. When this material is forged to manufacture disks, process parameters should be carefully designed to control strain and temperature distributions within the process windows by which desirable mechanical properties can be produced. In the present investigation, it was intended to design the process parameters for a conventional hot forging of this material by using a rigid-thermoviscoplastic finite element analysis technique. It was assumed that the process was performed by a screw press which is capable of maintaining a constant ram speed during loading. From the analysis results, it was found out that the initial temperature of the workpiece and the die shape were important parameters to control the forging process. In result, these parameters were properly designed for hot forging of a disk with specific dimensions.