• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.1
• /
• pp.29-36
• /
• 2003

Phytoecdysteroids with moulting hormone (MH) activity induce different responses in silkworms when used on different day of final instar, which can be manipulated for maximum benefit like early and uniform spinning behaviour, reducing crop loss and to increase cocoon yield. The results showed that application of this hormone on seed crop viz., CSR2, CSR4 and BL44 and BL67 in early stage of 5$^{th}$ instar i.e., at 72 hrs and 96 hrs though induced early and uniform spinning behaviour, there was an adverse effect by 9-36% on the economic characters like cocoon yield, cocoon weight, cocoon shell weight and also on fecundity etc. Application of this hormone in late stage of $5^th$ instar i.e., at the onset of spinning showed non-significant variations in some of the characters like cocoon weight, cocoon shell weight, cocoon shell ratio and fecundity. The physiological implications of phytoecdysteroid in hastening the maturation events and synchronization of spinning activities in different breeds are discussed.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.570-573
• /
• 2003

Wheels for passenger car support the car weight with tires. and they transmit rolling and braking power into the ground. Whittliing away at wheel weight is more effective to boost fuel economy that lighting vehicle body structure. A shape of hole in disk is optimized for minimizing the weight of steel wheel. Pro/ENGINEER program is used for formulating the design model. and ANSYS package is selected for analyzing the design model. It has difficulties 10 interface these commercial software directly. For combining both programs. response surface methodology is applied to construct approximation functions for maximum stresses and maximum displacements are obtained by full factorial design of five levels. This steel wheel is modeled in 14-inch diameter of rim. and wide parameter of hole in disk is only selected as design variable for reducing the weight of steel wheel. PLBA(Pshenichny·Lim-Belegundu_arora) algorithm. which uses the second-order information in the direction finding problem and uses the active set strategy. is used for solving optimization problems.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.417-426
• /
• 1998

During the 5 years period(93-197) of Seoul racecourse Thoroughbred racing, 2i963 holies took an active part in Seoul Racecourse and 61,181 horses entered the racing.400 horses(305 : 1 time, 76 :2 times, 19 :3 times, total : 514 cases) had bled(EIPH) from their nostils after their races. Incidence of bleeding horses from the 21963 racehorses was 13.5%, and incidence of bleeding cases from the 61,181 horses was 0.84%. The average racing frequence (1.05 times/1 month) of bleeders was more than that(0.8 times/1 month) of total race-horses. There was tendency to higher incidence of bleeding at older in age, female in sex, England/ Ireland horses in origin, higher grade in performances heavier in body weight increased, larger in weight to be carried, mid or longer in racing distance, handicap race, spring in season. Relationship did not exist between bleeding and respiratory disease. These results suggested that frequent entering into the race should be controlled. And body weight regulation with conditioning is recommended far reducing incidence of EIPH. It is supposed to prevent bleeding that decrescent performance horses should not be entering long distance or handicap race.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.3
• /
• pp.258-264
• /
• 1999

This study was carried out to investigate the status in weight loss yield of edible meat quality and free amino acid contents of the snow crab(Chionoectes japonicus) by steaming and various drying treat-ment. Change of body weight loss in steaming treatment sample were 20.48∼26.72% and yield of edible meat of steaming sample was higher than raw sample(p<0.05) The pH value was increased with steam-ing and drying and pH of trunk meat was more increased than leg meat. Volatile basic nitrogen(VBN) content of vacuum dried sample was highest and VBN of hot-air and freezing dried sample were about 10mg%. Content of vaccum dried sample wre 41.33 and 48,56mg%. Thirty kind of free amino acids dectected in the snow crab and changes of free amino acid in leg meat were markedly reduced by vacuum drying and the reducing ratio of leg meat by freeze drying was little. The major free amino acid of leg and trunk meat were 39.94% 46.78% respectively. The formation of flavor free amino acid in freezing dried sample were high but its hot-air aried sample were small.

• The Journal of Korean Physical Therapy
• /
• v.8 no.1
• /
• pp.1-14
• /
• 1996

The present case study has a object to investigate the changes in locomotion patterns of infant with athetoid cerebral palsy would be occured by the program when it is applied with upper extremity weight bearing. The subject has been limited to one infant over one year of age, selected from the patients in the physical therapy clinic, Rehabilitation Center, Taegu University. Subject is normal in the visual and auditory sense, but he is unable to walk on his own Subject weighted 2.9kg at birth and underwent severe postnatal kernicterus, always on the baby-walker at homo. He disliked supine position characteristic in moving in athetoid type before he was under the program. The program was applied 7 months. Each session of the program is composed of 7 stages : (1) prebriefing between the therapist and the parents (2) pretherapy amusement time of the infant (3) warming-up (4) upper extremity weight bearing (5) cooling-down (6) post-therapy amusement time (7) postbriefing. The locomotion of the subject is proved to be influenced by the program. He showed a leftward circular movement as a result of the exercise, reducing the involuntary movement of his head when he was positioned for crawling. Later he proceeded to develop into creeping, crawling, kneeling and finally cruising. In conclusion, it appeared evident that the locomotive abilities of the subject is improved by the program explored in this study. The higher locomotive patterns could be achieved such as crawling, sitting, kneeling and cruising wich enable the upper extremities weight bearing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.773-774
• /
• 2016

In this study, we perform the weight reduction and miniaturization of the shielding element that is applied for gamma-ray detectors for imaging of gamma-ray source. Through previous studies, we implemented a lead-based shielding element that represents the shielding effectiveness and performance of commercially available gamma-ray imaging apparatus similar to the shielding body. In this paper, we designed a tungsten-based shield for weight reduction and miniaturization than lead-based shield. We performed the MCNP simulation for shield design and then we obtained the results of reducing the weight of the 17% and 51% of the volume.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.181-182
• /
• 2015

The use of non-bearing light weight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Light weight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the impact resistance test method for light weight walls by using the actual impact load obtained through load analysis test in previous studies. The impact resistance test method was divided into the test method that uses soft body and the one that uses hard body. The size of specimen was set up as height 2.4m and width 3.0m. The size and shape of the body followed those used in BS 5234-2 and so on for the compatibility with the test method used overseas. The judgment criteria for impact resistance based on test results were not defined uniformly as the assessment of functional damage can vary depending on the type of material, structural method, purpose of wall, and so on even when the same impact load was applied.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.7-12
• /
• 2004

Large-sized pins are usually used to lift and handle large low speed diesel engine crankshaft. There has then been a need to reduce and optimize the weight of the traditionally used pins. Making an hole by cutting the inside of the pin out was investigated in view of static and fracture strength. To compensate the stress increase caused by the introduction of the inner hole, the groove in the circumferential direction pre-existing on the pin is to be removed. Finite element analysis was carried out for both the original model and weight reduced model. Stress intensity factors for semi-elliptical defects assumed on the pin for the original model and weight reduced model was calculated using the ASME method and compared with the fracture toughness test result of the pin material. The diameter of the cutting hole for the revised model was determined based on the analysis results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.100-106
• /
• 2022

Topology optimization is applied for the optimal design of various products to ensure weight reduction and productivity improvement. Reducing the weight of the mold while maintaining its rigidity can ensure shortening of the production cycle, stabilization of the mold temperature, and reduction of mold material costs. In this study, a topology optimization technique was applied to the optimal design of the injection mold, and a topology-optimized model of the mold was obtained. First, the injection mold for the square specimens was modeled. Subsequently, a structural analysis was performed by implementing a load condition generated during the injection molding process. Topology optimization was performed based on the structural analysis results, and the models of the initial and topology-optimized designs were manufactured at 1/4 magnification using a 3D printer. Consequently, compared with the existing model, the weight of the topology-optimized model decreased by 9.8%, and the manufacturing time decreased by 7.61%.

• Journal of Environmental Science International
• /
• v.28 no.4
• /
• pp.393-401
• /
• 2019

The present study were conducted to determine physiological activities and antioxidant effects [2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, 2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging activity, reducing power, Ferric Reducing Antioxidant Power (FRAP) and Fe2+ (ferrous ion) chelating capacity] of 70% methanol, chloroform:methanol, 2:1 volume ratio (CM) and ethyl acetate extract of turmeric (Curcuma longa L.). Bioactive compound of tannin $0.125{\pm}0.007mg$ Catechin Equivalent (CE)/g dry weight. Turmeric extracts yield were 70% methanol 16.54%, CM 5.64% and ethyl acetate 4.14%, respectively. Antioxidant activity of the samples exhibited a dose-dependent increase. Results showed that extraction solvent had significant effects on total flavonoid content and antioxidant effects of ethyl acetate. But ferrous ion-chelating capacity of 70% methanol extract was higher than CM and ethyl acetate extract. From the results of this study, turmeric can be utilized as a valuable and potential nutraceutical for the functional food industry.