• Journal of Korean Neurosurgical Society
• /
• 제56권2호
• /
• pp.91-97
• /
• 2014

Objective : The purpose of this study was to evaluate demographic and clinical factors affecting the common femoral artery diameter and length, and anatomical relationship between the femoral head and the common femoral artery during angiography. Methods : We retrospectively reviewed 109 femoral angiograms. We collected the clinical data of the patients and estimated the common femoral artery diameter and length. We divided the areas in the angiogram from cephalic to caudal direction (zone 0 to 5). The lowest levels of the inferior epigastric artery loop and points of the common femoral artery bifurcation were checked. Results : The luminal diameter of the common femoral artery was $6.19{\pm}1.20mm$. Height, weight, body surface area, as well as common femoral artery diameter were significantly greater in men than in women (p<0.005). The length of the common femoral artery was $27.59{\pm}8.87mm$. Height, weight and body surface area showed strong positive relationships with common femoral artery diameter. All of the inferior epigastric artery loops were located above the center of the femoral head. The point of common femoral artery bifurcation was above the center of the femoral head in 4.59% of femoral angiograms. Conclusions : Males and patients with a high body surface area have a larger common femoral artery diameter. The cumulative probability of optimal targeting between the lowest margin of the inferior epigastric artery loop and the common femoral artery bifurcation is the highest in zone 3 puncture.

• 항공우주시스템공학회지
• /
• 제12권4호
• /
• pp.26-34
• /
• 2018

이륙 중량 25 kg급 멀티콥터용으로 개발된 프로펠러에 대해 정적 구조 시험 및 성능 시험을 통해 설계 요구도 충족 여부를 판별하기 위한 시험 평가를 수행하였다. 정적 구조 시험에서는 극한 하중 및 요구도 하중 부가 후 시편 파손이 발생하지 않음으로써 프로펠러 구조 강도에 대한 안전 여유 3 이상을 갖는 것으로 나타났다. 성능 시험에서는 설계 요구도의 제자리 비행 추력 및 최대 추력을 발생시키고, 운용 추력 영역에서 제자리 비행 성능 효율은 0.73 이상을 나타내었다. 기준 프로펠러와 비교할 때, 성능 효율 최대값은 3% 이상 증가되고, 소비 전력은 운용 영역에서 4% 이상 저감되는 것으로 나타났다. 구조 강도 요구도 및 성능 요구도를 충족시킴으로써 프로펠러는 성공적으로 개발된 것으로 평가되었다.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.1-10
• /
• 2003

The purpose of this study was to verify the shore margin protection effect of a root system developed from direct sticking of Salix gracilistyla Miq., focusing on the reinforcement of soil shear strength. The materials were 20cm long sticks whose average diameter and weight were 7.52mm and 14.58g respectively, and sandy loam(Sand 60.36%, Silt 28%, Clay 11.64%), whose maximum dry weight(${\gamma}$$_{dmax}$) was 1.59gf/㎤ at the water ratio( $W_{opt}$) 13.8%. The direct shearing test(KS F 2343) was applied to cylindric columms(diameter 132mm) of pure soil and two years old root reinforced soil. At each condition of vertical stress, 10N/$ extrm{cm}^2$, 14.41N/$\textrm{cm}^2$ and 18.82 N/$\textrm{cm}^2$, five soil+root columns were sheared. After shear tests, the root area ratio and soil moisture on the shear plane were measured. The results of this research were as follows: 1. The average of root area ratio was 1.86% and the soil moisture 14.67%. 2. Two years old root system was found to increase the soil shear strength of pure soil in terms of Cohesion(C) and Inner friction Angle($\phi$) as follows. 3. The relationship between root area ratio and the increased shear strength can be presented with the following equation, $\Delta$S ≒ 0.33ㆍ TrㆍAs/A $\Delta$S : Increased Shear Strength Tr : Average Tension Strength of Root, Ar/A : Root Area Ratioioage Tension Strength of Root, Ar/A : Root Area Ratio

• 한국식품조리과학회지
• /
• 제31권2호
• /
• pp.112-117
• /
• 2015

The analytical method for ethyl carbamate (EC) in maesil (Prunus mume) extract was developed with deuterium-labeled ethyl carbamate as an internal standard. Samples were neutralized with an addition of 1 N sodium hydroxide solution, followed by a solid phase extraction with a Chem Elut cartridge. A standard curve exhibited a good linearity with correlation coefficient of 0.9991. The limit of detection (LOD) and limit of quantification (LOQ) were 2.91 ng/g and 8.83 ng/g, respectively. The recovery rate of EC ranged from 91.40% to 120.90%. The precision never exceeded 12.57% (intra-day) and 11.03% (inter-day). Samples were comprised of 24 home-made and 7 commercially-available maesil extracts. Eight home-made samples contained EC at levels between 3.39 and 75.76 ng/g. Three commercially-available samples had EC at levels between 11.67 and 20.16 ng/g. Average daily intakes of EC from maesil extracts for consumers were 0.23 g/kg of body weight. Based on a benchmark dose confidence limit ($BMDL_{10}$) of 0.25 mg/kg of body weight/day, the margin of exposure (MOE) of EC in maesil extract for consumers was 94,150, which is not of concern. Considering that a daily intake of maesil extract has been increasing, further studies on the formation of EC in maesil extract is needed.

• 한국방재학회 논문집
• /
• 제8권3호
• /
• pp.67-75
• /
• 2008

본 논문은 형강을 이용한 강-콘크리트 합성복공판 기술개발에 관한 것이다. 기존의 롤포밍 단면을 배제하고 형강을 이용하여 효율적인 강합성 단면을 구성함으로써 제작성과 경제성을 확보하고, 전단연결재의 개선을 통해 합성성능 뿐만 아니라 차후 콘크리트와 강재의 분리에 용이한 구조를 개발하였다. 성능검증 실험결과 기존의 전단연결재만으로는 강재와 콘크리트의 합성거동을 이루는데 한계가 있음을 확인하였다. 나아가 개발 복공판은 설계하중대비 5배 이상의 극한 내하력을 확보하고 있으며, 200만회 피로성능시험에 대해서도 손상이 거의 발생하지 않으며 우수한 구조성능을 나타냈다. 따라서, 형강을 이용한 합성단면 구성을 통해 구조성능 확보뿐만 아니라 기존 합성복공판 대비 약 27% 정도의 강재량 감소가 가능함을 확인하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제26권6호
• /
• pp.1335-1351
• /
• 2015

경기상황에 대한 기업과 소비자들의 인식을 효과적으로 파악하기 위해 기업경기실사지수 (BSI)와 소비자동향지수 (CSI)를 편제하고 있는 한국은행은 2012년부터 이 두 지수를 합성한 경제심리지수 (ESI)를 추가로 개발하여 발표하고 있다. ESI는 그 유용성을 인정받고 있으나 지수의 예측력 측면에서 개선의 여지가 있는 것으로 나타났다. 본 연구에서는 ESI에 대해 유용성 평가 작업을 실시하고 그 결과를 토대로 현행 ESI의 편제방식의 개선 또는 보완 방법을 모색하였다. 실증분석 결과 ESI 구성요소의 최적 가중치 탐색과정에서 슬라이딩 윈도우 방법을 이용한 동적 최적 가중치 탐색은 기존 ESI의 구성방식을 보완하거나 또는 경제상황을 고려하여 ESI 구성항목들의 가중치를 부여하고자 할 때 매우 유용한 방법이라고 판단할 수 있었다.

• Journal of Veterinary Science
• /
• 제23권3호
• /
• pp.44.1-44.10
• /
• 2022

Background: The equine temporomandibular joint (TMJ) has a complex anatomical structure that makes diagnosis of TMJ disorders difficult. Computed tomography (CT) is now available in equine medicine; hence, TMJ evaluation has become more convenient. Objectives: The objectives of this study were to describe the CT features of the TMJ in Jeju horses and to compare these features with those of Thoroughbreds. Methods: In this report, the TMJs of 10 Jeju horses (mean age: 4.5 ± 1.9 yr; mean body weight: 282.6 ± 40.3 kg) and 6 Thoroughbreds (mean age: 7.3 ± 1.6 yr; mean body weight: 479.7 ± 44.0 kg) were examined using CT. After CT scanning, the Hounsfield units (HU) and height to width ratio (H:W) of the mandibular condyle were measured. Results: The mean H:W in Jeju horses was significantly lower than that in Thoroughbreds. The mean HU in Jeju horses was lower than that in Thoroughbreds; however, the difference was not significant. The most frequent CT finding was an irregular medial margin of the mandibular condyle in both breeds. Conclusions: In this study, the shape of the mandibular condyle in Jeju horses was flatter than that in Thoroughbreds. This report could be useful in evaluating the TMJ in Jeju horses. Moreover, CT could be a pragmatic choice for the examination of the TMJ in horses.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.39-45
• /
• 2022

Normal strategy of structure optimization procedure has been minimum cost or weight design. Minimum weight design satisfying an allowable stress has been used for the ship and offshore structure, but minimum cost design could be used for the case of high human cost. Natural frequency analysis and forced vibration one have been used for the strength estimation of marine structures. For the case of high precision experiment facilities in marine field, the structure has normally enough margin in allowable stress aspect and sometimes needs high natural frequency of structure to obtain very high precise experiment results. It is not easy to obtain a structure design with high natural frequency, since the natural frequency depend on the stiffness to mass ratio of the structure and increase of structural stiffness ordinary accompanies the increase of mass. It is further difficult at the grillage structure design using the profiles, because the properties of profiles are not continuous but discrete, and resource of profiles are limited at the design of grillage structure. In this paper, the grillage structure design system under the constraint of high natural frequency is introduced. The design system adopted genetic algorithm to realize optimization procedure and can be used at the design of the experimental facilities of marine field such as a towing carriage, PMM, test frame, measuring frame and rotating arm.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권2호
• /
• pp.253-260
• /
• 1996

The purpose of this investigation was to determine the possibility of clinical use of toothash-plaster block implant material with ratio of 2 : 1 by weight. We made 1cm diameter round partial thickness defect at both sides of calvaria. Right side was implanted with block and left side was not implanted as a control site. The following results were obtained : 1. In gross examinations, the implanted site had a hardness on palpation and the margin with host bone was not identified clearly at 12 weeks after operation. But control site contained the fibrous tissue. 2. In the light microscopic examinations, most of the implanted sites were repaired by newly-formed bone at 12 weeks postoperatively. 3. At 8 weeks postoperatively, the implanted particles were divided into small granules and the amount was decreased gradually. Some remained particles were united directly with newly-formed bone. But the implanted particles still remained partly at 24 weeks postoperatively.

• 구강회복응용과학지
• /
• 제33권2호
• /
• pp.63-70
• /
• 2017

임상적으로 고정성보철물의 적합도는 성공적인 수복을 위해 필수적인 요소이다. 보철물의 적합도는 크게 변연적합도와 내면적합도로 분류되며, 이를 평가하기 위한 방법으로는 현미경 변연 측정법, 절단면 측정법, 실리콘 복제법, 3차원 스캔데이터 중첩법, 무게 측정법, 마이크로 CT 측정법 등 다양한 방법들이 소개되고 있다. 이에 본 연구에서는 기존의 문헌들을 바탕으로 각 방법들의 장, 단점을 비교분석함으로써 디지털환경에서 보다 편리하고 정확한 측정법을 제시하고자 한다.