This study was carried out to evaluate the Salmonella cross contamination at retail chicken meat outlets in Kandy, Sri Lanka and to identify the risk factors for Salmonella contamination at retail chicken meat outlets. Fifteen retail chicken meat outlets in Kandy area were randomly selected. Pre-tested questionnaires were used to collect data for identifying risk factors of Salmonella cross contamination at retail outlets and swab samples from meat contact surfaces/utensils were obtained. Out of 57 swab samples collected from meat contact surfaces/utensils, the overall prevalence of Salmonella cross contamination was 21%. Weighing scale (33%), meat containing trays/buckets (27%) and cutting board (25%) showed the highest percentage of Salmonella prevalence whereas knife and showcase showed relatively low percentages, 14% and 9%, respectively. Retail chicken outlets with slaughtering facilities had a significantly higher prevalence of Salmonella cross contamination than those without slaughtering facilities. This higher rate of Salmonella cross contamination at retail chicken meat outlets could be attributed to lack of proper cold chains and minimal facilities, and poor level of hygiene in those outlets.
Transactions of the Korean Society of Mechanical Engineers B
/
v.20
no.12
/
pp.4027-4035
/
1996
Accuracy of gas flow measurements using sonic nozzle and factors which influence on the discharge coefficients of sonic nozzle are investigated with high pressure gas flow standard measurement system. The gas flow measurement system comprises two compressors, storage tank, temperature control loop, sonic nozzle test section, weighing tank, gyroscopic scale and data acquisition system. The experiments are performed at various nozzle throat diameter and inlet pressure. Overall uncertainty of discharge coefficients is estimated to less than .+-.0.2% and most of experimental data fall into this range. Dependence of discharge coefficients on the Reynolds number is good agreement with those suggested in ISO document. The influence of swirl on the discharge coefficients becomes greater as the nozzle throat diameter is enlarged. The discharge coefficient of conical nozzle shows about 4.5% lower discharge coefficients than those of toroidal nozzle, but variation trend with Reynolds number is very similar each other and reproducibility of data is very good.
The purpose of this study was to investigate the effect of massage therapy on weight gain, length and head circumference in instituted infants. This study utilized nonequivalent control group with repeated measuring by quasi experimental design. Fifty eight instituted infants in Daejeon city were selected for the study. Fifty eight infants were randomly assigned two groups, one served as the control group and the other was experimental group to whom massage therapy was given. For the experimental group, massage protocol(developed by Field, 1986) was applied 2 times a day, mid-morning and early evening, for 4 weeks for each infants by researcher and trained research assistants. As a weight weighing instrument, electronic indicator scale (Cas Co., Korea) was used. The result of this study were summarized as follows; 1.A repeated measures ANOVA identified a significant group by time effect over the four weeks of intervention(F=14.69, p < .0001). Infants assigned to experimental group gained more weight than control group infants. 2. T-test identified that significant differences in length(t=2.60, P=.013) and head circumference(t=4.27, P=.000). Infants assigned to experimental group had more length and head circumference than control group infants. In conclusion, Massage therapy improved weight gain, length and head circumference of instituted infants. Therefore, it is recommended to utilize massage therapy as a nursing intervention for instituted infants.
Goo-Hwan Shin;Hyosang Yoon;Hyeongcheol Kim;Dong-Soo Choi;Jae-Suk Lee;Yeong-Ho Shin;EunJi Lee;Sang-sub Park;Seokju Kang
Journal of Space Technology and Applications
/
v.4
no.1
/
pp.12-26
/
2024
Attitude control of a satellite is very important to ensure proper for mission performance. Satellites launched in the past had simple missions. However, recently, with the advancement of technology, the tasks to be performed have become more complex. One example relies on a new technology that allows satellites quickly alter their attitude while orbiting in space. Currently, one of the most widely used technologies for satellite attitude control is the reaction wheel. However, the amount of torque generated by reaction wheels is too low to facilitate quick maneuvers by the satellite. One way to overcome this is to implement posture control logic using a control moment gyroscope (CMG). Various types of CMGs have been applied to space systems, and CMGs are currently mounted on large-scale satellites. However, although technological advancements have continued, the market for CMGs applicable to, small satellites remains in its early stages. An ultra-small CMG was developed for use with small satellites weighing less than 200 kg. The ultra-small CMG measured its target performance outcomes using a precision torque-measuring device. The target performance of the CMG, at 800 mNm, was set through an analysis. The final torque of the CMG produced through the design after the analysis was 821mNm, meaning that a target tolerance level of 10% was achieved.
This studies have been carried out for several years to develop more better urea resin treating process on silk textiles which may be better crease resist without harming on the textile touch feeling. Specially, this paper payed attention to minimize the necessary formaldehyde content to be condensed with urea and created a new processing method which is named as Homo Metalic Urea Resin found to be better than urea resin process. The obtained results are as followings. 1. The prepared urea resin was found to be smell-less because of minimized formaldehyde content is the least than any other reports carried out before than this. 2. A new type of urea resin has been created by using uric 2incchloride and formaldehyde which is named as Homo Metalic Urea Resin. This processing method may carry both weighing process and urea resin process. 3. Crease resistance, stiffness and bulkiness were increased through such resin treats. Homo metalic urea resin process showed better results than the urea resin process. 4. Spun silk or low twisted silk have shown better crease resistance than raw silk or high twisted silk upon the both resin treats. 5. Both treat methods were found to be good economical feasibility upon the silk finishing process. 6. Tenacity and elongation of silk fibers were found to decrease some what because of grafting or weighing results. 7. Wooly silk has been also created with specific urea resin process. Such silk could be obtained by formaldehyde gas treat with urea soaken silk in a chamber, which induced to form scale on the surface of silk fibers.
This longitudinal quasi-experimental research was conducted to develop parent role education program and to evaluate the effect of this program for mother-infant interaction, childrearing environment and infant development. The subjects were the healthy infants weighing over 2,500gm at birth, whose gestational age was more than 37weeks, and their healthy mothers. The sample consisted of eighteen mother-infant dyads for intervention group and sixteen dyads for control group. Data were collected from March 15th in 1999 to Jun 20th in 2000. The intervention group received programmed education consisted of discharge education, telephone counselling, and home visiting care. But control group were collected data without programmed education. In this study, the Nursing Child Assessment Teaching Scale(NCATS) devised by Barnard was used to determine the mother-infant interaction, HOME was used to determine the childrearing environment, and Griffiths mental development scale was used to determine the infant development. The data were analyzed using SPSS Win using chi-square test, t-test, and repeated measure ANOVA. This study was focused on the results of twelve months time point. Summaries of the results were as follows: 1. There was no significant difference in mother-infant interaction(NCATS) between intervention group and control group. But both of two groups showed significantly higher in interaction score at twelve months than at six months in the subscales of social-emotional growth fostering, and responsiveness to caregiver. 2. There was no significant difference in childrearing environment(HOME) between two groups at twelve months. But when each subscale of HOME was examined, intervention group showed higher scores in the dimensions of maternal involvement with child(p=.001), and maternal emotional-verbal responsivity(p=.048). 3. There was no significant difference in GQ of the Griffiths mental development scale between two groups, although significant difference was found in performance subscale. 4. Infant development at twelve months showed significant correlation with mother-infant interaction and childrearing environment at six months, although mother-infant interaction and childrearing environment at twelve months did not show significant correlations with infant development at twelve months. 5. Developmental scores at six months showed significant correlations with variety in daily stimulation, and mother's emotional, verbal responsivity, whereas developmental scores at twelve months showed significant correlations with acceptance of child behavior at six months, and appropriate play material at twelve months. In conclusion, the maternal education program for primipara showed long term effect in some categories in organizing the childrearing environment, and fostering the infant development. We suggest further study and implications of parent role education program for high risk parents such as parents in low economic status or with premature babies.
This study has been conducted on the nonequivalent control group pretest-posttest design in quasi experimental basis and newly born premature infants from intensive care unit of G Medical University Hospital in Inchon Metropolitan were selected in two groups of 21 infants each. The first group for experimental and the other for control. Data has been collected form October 30, 1997 to August 29, 1998. For the experimental group tactile and kinesthetic stimulation was applied 2 times a day for 10 days(10 : 00~11 : 00 hours in the morning and 17 : 00~18 : 00 in the afternoon). As a weight weighing instrument. electronic indicator scale(Cas Co. korea) was used. To determine urine cortisol concentration level in stress hormone, radio immune assay method was used. And high performance liquid chlomatography was used to determine urine norepinephrine, concentration level To determine behavior status, tools developed by Anderson et at(1990) and remodeled by Kim Hee-Sook(1996) were used. Collected data were analyzed with the SAS program using x$^2$-test, student t-test, repeated measures ANOVA and paired t -test. The result were as follow. 1. As for the daily weight gain. the experimental group showed first change in weight and this group also showed higher weight in the average weight than the control group. Statistically, however, there was no significant factor between the two group. 2. The cortisol concentration in urine showed decrease in the experimental group norepinephrine concentration in urine showed increase in both experimental and control groups. No statistical significance was shown between the two groups. 3. In the aspect of behavior status. the experimental group showed statistical significance by showing inactive in the state of alert and conversion to a positive state than the control group. In conclusion, the sensory stimulation in this study showed a positive aspect through there was no statistical significance in the weight gain and urine stress hormone concentration. In the behavior status, there was statistical significance in the frequency of staying inactive in the state of alert and conversion to a positive state.
Kim, Eun Jeong;Lee, SangYoon;Park, Dong Hyeon;Kim, Honggyun;Choi, Mi-Jung
Food Science of Animal Resources
/
v.40
no.3
/
pp.444-460
/
2020
This study was conducted to investigate the effects of freezing and storage temperature (-18℃, -50℃, and -60℃) on the physicochemical properties of pork neck and chicken leg meat in home-scale deep freezers. Pork neck was cut into a thickness of 3 cm (9×9×3 cm, 150 g), individually packed in air-containing packages, and stored at different temperature (-18℃, -50℃, and -60℃) for 6 months. Chicken leg meats were prepared (10 cm long, weighing 70 g) and packed in the same manner. Frozen samples were thawed at 2℃. Physicochemical properties such as thawing loss, cooking loss, water-holding capacity, color, volatile basic nitrogen (VBN), and thiobarbituric acid reactive substances (TBARS) were evaluated. The samples frozen by deep freezing (-60℃) was favorable with respect to thawing loss, color, and VBN. Samples frozen at -60℃ had lower values of thawing loss and VBN than those frozen at -18℃ for all storage periods (p<0.05). Color parameters were more similar to those of fresh meat than to those of samples frozen at -18℃ for 6 months. The TBARS of all samples were below 0.3 mg malondialdehyde/kg, thereby indicating oxidative stability of lipids. Consequently, deep freezing at -60℃ may be acceptable for maintaining the quality of fresh pork neck and chicken leg meat for 6 months without deterioration.
Yu, Seok cheol;Kim, Yu yong;Lim, Seong yoon;Song, Ho sung
Journal of Bio-Environment Control
/
v.29
no.4
/
pp.448-455
/
2020
This study was carried out to investigate reduction of the frost damage using the mesh net used for the purpose of non-bagged cultivation. A device measuring the weight of frost was developed and installed in both the control and the experimental, and the effect of frost reduction was evaluated with their weights. As a result, weight of frost in the control was reduced from 37% to 59% with mesh net on the day the frost was observed. In addition, the device for automatically observing the amount of frost was developed and the height of the windbreak of the frost measuring device was determined to be 30 cm through wind tunnel experiment. The results of this study are expected to reduce frost damage during the flowering season of fruit trees by installing mesh net and it is expected to be used as basic data for agricultural use of mesh net.
The Journal of Korean Institute of Communications and Information Sciences
/
v.37
no.4C
/
pp.307-312
/
2012
In this paper, we perform a complexity analysis for implementation of the ISO/IEEE 11073 Personal Health Device (PHD) standards in order to check the required system resources when ISO/IEEE 11073 PHD standards are implemented on the embedded system. Base on the implemented programs complying the PHD standards for a weighing scale, a blood pressure monitor, and a glucose meter among the various personal health devices, we make a pseudo-code. And then from the two different points of view such as program memory space and data memory space, we make a complexity analysis model. Because system resources or capability are strongly restricted in the personal health devices, our research work is very useful to estimate the required system resources.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.