• 융합보안논문지
• /
• 제13권6호
• /
• pp.25-33
• /
• 2013

우리나라는 전자금융거래시 공인인증서를 사용하도록 법으로 규정되어 있다. 그러나 공인인증서는 윈도우 운영체제의 인터넷 익스플로러 환경에서 사용되는 액티브X에 기반하고 있어 다른 웹브라우저에서는 사용하기 어려운 문제가 있고 따라서 다양한 인증기술의 개발에 저해요소가 되며 관련산업 발전에도 지장을 주고 있다. 또 공인인증서는 사용자 PC나 USB에 파일로 저장되기 때문에 유출될 수 있는 안전성 문제도 가지고 있다. 이에 정부에서는 공인인증서 의무사용 규제를 완화하여 다른 인증기술을 사용할 수 있는 길을 열어 놓았으나 승인받은 대체기술이 없어 사용하지 못하고 있고 국회에는 공인인증서 폐지를 골자로 하는 관련법 개정안이 제출되어 있다. 개정안은 관련업계의 이해타산과 역학구도에 따라 찬반양론이 팽팽히 맞서는 가운데 9월 정기국회에서 통과여부가 결정나게 된다. 본 논문에서는 공인인증서 의무사용 규제완화에 대한 논란에 대해서 알아보고 개선방안을 모색해본다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.243-247
• /
• 2004

The dynamometers which had made in a long time ago could not control the input/output quantity of water minutely and was sensitive to a noise since it was controlled by an analog control method. Therefore, a fully digital controlled system was urgently required to be robust against various noises. In this paper, the new system which can control the amount of circulated water in dynamometer was developed. This system is consisted of an industrial digital type controller and a servo motor. The industrial PLC was used as a main controller for the developed system, and the actuator and servo motor were used to control the inlet and outlet valve independently. The torque signal of load cell was fed back to the main controller to regulate the diesel engines load. Generally, an input/output valve position of the old dynamometer was fixed with a proper situation for an engine output test and the torque was changed according to the time interval. However, the torque value for the dynamometer could not be constantly kept because of the variation of the input water flow and fluid characteristic. Therefore, the automatic control of an inlet and outlet valve should be performed to keep the constant torque. So, the PID control method was applied to solve this problem. Also, the development of a web-based remote control system was described in this paper. This software will give us the convenience of operation, the more efficient operations, and the reduced operator workload for operation of the dynamometer. The application results of the system have been verified at actual diesel engine field.

• 패션비즈니스
• /
• 제21권1호
• /
• pp.134-147
• /
• 2017

The purpose of this study is to analyze fashion brands' contents and characteristics of the participation platform of users, to assess the types and strategies of mass customization(MC). Most fashion brands sell one professional content: Shoes brands were the most common, followed by bags, unisex wear, and menswear. In consumer's design selection elements, changes in color and materials were the most common. For the personalization service elements, monogram service was the most common. The results of MC types analysis were as follows, Customized Standardization was the most common, followed by Tailored Customization, Pure Customization, and Segmented Standardization. For the types according to changes in products and expression methods, Cosmetic was the most common. And the classification according to modulation, Modularizers were the most common. For Creativity, brands in the making stage were the most common. For Flexibility, although brands different methods, high flexibility by modularizing design elements of products and accomplishing various design through participation. The Ease of use for various expression was generally high, parallel to Flexibility. For Durability, because consumers could receive end products only when they participated in the assembly stage in the on-line purchase, their continuous participation was not possible, so they participated only once. The typical types and strategy of MC were analyzed. The Customized Standardization type was the most common in shoes, bag, and womenswear brands. It was the Cosmetic type which could change colors and materials, the Modularizers, and had high Flexibility and Ease of use and low Durability.

• 대한간호학회지
• /
• 제45권5호
• /
• pp.723-732
• /
• 2015

Purpose: The purpose of this study was to develop a system dynamics model for adolescent obesity in Korea that could be used for obesity policy analysis. Methods: On the basis of the casual loop diagram, a model was developed by converting to stock and flow diagram. The Vensim DSS 5.0 program was used in the model development. We simulated method of moments to the calibration of this model with data from The Korea Youth Risk Behavior Web-based Survey 2005 to 2013. We ran the scenario simulation. Results: This model can be used to understand the current adolescent obesity rate, predict the future obesity rate, and be utilized as a tool for controlling the risk factors. The results of the model simulation match well with the data. It was identified that a proper model, able to predict obesity probability, was established. Conclusion: These results of stock and flow diagram modeling in adolescent obesity can be helpful in development of obesity by policy planners and other stakeholders to better anticipate the multiple effects of interventions in both the short and the long term. In the future we suggest the development of an expanded model based on this adolescent obesity model.

• 대한물리치료과학회지
• /
• 제18권4호
• /
• pp.47-58
• /
• 2011

The purpose of this study was to analyses the main factors of research papers for related with home physical therapy. This study was retrospective descriptive study, the period of data collection was from 1991 to 2011. The data was collected by the journal related in physical therapy, the dissertation of academic degree, National Assembly Library and the web-site for academic information. In the web-site, searched with the keyword 'home physical therapy' and 'after school voucher'. The results were as follows; 1. In the home physical therapy, visiting physical therapy, school physical therapy, there were different based on laws; home physical therapy was based on medical law, visiting physical therapy was based on law for community health and law for long term health insurance, school physical therapy was based on special education law. 2. The summary of research title/thema from 1991 to 2011 was as follows; for the home and visiting physical therapy 'the needs and necessity of home and visiting physical therapy' was 18 papers, 'the contents of service of home and visiting physical therapy' was 18 papers, 'program and skill development' was 16 papers, 'system developing and induction strategy of home and visiting physical therapy 'was 15 papers, 'costs of nome and visiting physical therapy' was 2 papers, 'perception and information of home and visiting physical therapy' was 9 papers, 'Recoding system and administration management' was 9 papers, 'the others 'was 14 papers, for the school physical therapy 'after school voucher system' was 9 papers, the others was 4 papers. The total papers was 114 papers. 3. Finally suggested 'Model of Educational Program for HomeVisiting and School Physical Therapy'.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.121-127
• /
• 2010

퍼포본드 FRP 판을 영구 거푸집 및 인장 보강재로 이용한 합성보에 대한 실험을 수행하였다. FRP 판을 영구 거푸집 및 인장 보강재의 합성이용은 재래적인 방법에서 필요한 거푸집 조립 및 탈형 등의 작업이 수반되지 않으므로 빠른 시공이 가능하다. FRP 판과 콘크리트가 합성 구조체로 작용하기 위해서는 FRP 판의 표면처리가 필요하다. 이를 위해 FRP 판에 잔골재를 현장에서 많이 사용하는 에폭시를 이용하여 부착하고 FRP 판의 웨브에 구멍을 천공하였다. 합성보에 추가적인 휨 및 전단보강은 하지 않았다. 비교를 위해 두가지 종류의 비교 실험시편을 제작하였다. FRP 판의 웨브에 구멍을 천공하지 않은 비교 실험시편과 FRP 판 대신에 철근으로 보강한 비교 실험시편이다. 모든 시험체는 중앙에 집중하중을 재하하여 파괴까지 실험하였다. 본 연구 결과 퍼포본드 FRP 판은 콘크리트 구조물의 영구 거푸집 대용 및 인장 보강재로도 활용 할 수 있는 가능성을 보여주었다.

• 한국IT서비스학회지
• /
• 제10권4호
• /
• pp.259-268
• /
• 2011

A robot education system by emulation based on Web can be efficiently used for understanding concept of robot assembly practice and control mechanism of robot by control programming. It is important to predict the path of the line tracer robot which has to be decided by the robot. Shortest Path Algorithm is a well known algorithm which searches the most efficient path between the start node and the end node. There are two related typical algorithms. Dijkstra Algorithm searches the shortest path tree from a node to the rest of the other nodes. $A^*$ Algorithm searches the shortest paths among all nodes. The delay time caused by turning the direction of navigation for the line tracer robot at the crossroads can give big differences to the travel time of the robot. So we need an efficient path determine algorithm which can solve this problem. Thus, It is necessary to analyze the overhead of changing direction of robot at multi-linked node to determine the next direction for efficient routings. In this paper, we reflect the real delay time of directional changing from the real robot. A speed based Dijkstra algorithm is proposed and compared with the previous ones to analyze the performance.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.77-86
• /
• 2005

This paper is about the development of Automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, The punching accuracy is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used fur the sake of cost down instead of using high quality vision systems for the factory automation. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.981-984
• /
• 2004

This paper is about the development of Automatic FPC punching instrument. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. Test algorithm shows good results to the designed automatic punching system.

• 성인간호학회지
• /
• 제24권3호
• /
• pp.253-265
• /
• 2012

Purpose: The focus of this research was a systematic review of published articles and theses for a degree in Korea and foreign countries on rehabilitation therapy for patients with total knee arthroplasty (TKA). Methods: The literature until December in 2011 were searched and the data basis included Medline, CINAHL, KERIS, National Library of Korea, and National Assembly Library web sites. Words for the search were TKA or TKA and rehabilitation. Studies included randomized controlled and non-equivalent control group pretest-posttest design. 31 studies were analyzed focusing on type, application method, dependant variable and effect using descriptive statistics. Results: Seventeen rehabilitation therapies and forty-nine dependant variables were used. The application methods of rehabilitation therapy were diverse. The most frequently used rehabilitation type was an exercise therapy and a pain/discomfort was the most frequently used dependant variable. The effects of rehabilitation therapy were inconsistent. Conclusion: The individualized rehabilitation therapy must be comprised of type, time, frequency, period and duration. Attention must be made as to the research design, especially the better measurement of the dependent variables. This review may serve as a base for future research.