• Journal of Microbiology and Biotechnology
• /
• v.19 no.2
• /
• pp.140-146
• /
• 2009

MAPSI(Management and Analysis for Polyketide Synthase Type I) has been developed to offer computational analysis methods to detect type I PKS(polyketide synthase) gene clusters in genome sequences. MAPSI provides a genome analysis component, which detects PKS gene clusters by identifying domains in proteins of a genome. MAPSI also contains databases on polyketides and genome annotation data, as well as analytic components such as new PKS assembly and domain analysis. The polyketide data and analysis component are accessible through Web interfaces and are displayed with diverse information. MAPSI, which was developed to aid researchers studying type I polyketides, provides diverse components to access and analyze polyketide information and should become a very powerful computational tool for polyketide research. The system can be extended through further studies of factors related to the biological activities of polyketides.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2414-2417
• /
• 2005

Compact Camera Module(CCM) is widely used in PDA, Celluar phone and PC web camera. With the greatly increasing use for mobile applications, there has been a considerable demands for high speed production of CCM. The major burden of production of CCM is assembly of lens module onto CCD or CMOS packaged circuit board. After module is assembled, the CCM is inspected. In this paper, we developed the image capture board for CCM and the imaging processing algorithm to inspect the defects in captured image of assembled CCMs. The performances of the developed inspection system and its algorithm are tested on samples of 10000 CCMs. Experimental results reveal that the proposed system can focus the lens of CCM within 5s and we can recognize various types of defect of CCM modules with good accuracy and high speed.

• Annual Conference of KIPS
• /
• 2024.05a
• /
• pp.95-98
• /
• 2024

현대 소프트웨어는 다양한 서비스 구조가 사용되고 있다. 이러한 환경에서는 각 서비스의 요구사항을 충족시킬 수 있는 기술들이 필요하며, Wasm(WebAssembly)은 많은 서비스에서 요구하는 조건을 만족시킬 수 있는 장점을 가지고 있다. 이에 본 논문에서는 WasmEdge와 다양한 런타임 환경의 성능을 비교하기 위해 로직 실행 시간, HTTP 부하 테스트, 컨테이너 이미지 크기의 세 가지 지표를 분석한다. 결과는 로직 실행 시간에서 Wasm이 1.81초로 가장 빨랐고, 컨테이너 이미지 크기 역시 9.54MB로 가장 작았다. 마지막으로 HTTP 부하 테스트에서는 가장 빠른 트래픽 처리를 보여준 Spring Boot의 평균 초당 15076개보다 WasmEdge가 9239개로 트래픽 처리가 느렸지만, 로직 실행 속도와 컨테이너 이미지 크기가 작기 때문에 충분히 서버리스 컴퓨팅, 마이크로 서버, 엣지 컴퓨팅 분야에서 요구하는 조건을 만족시킬 수 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.3 s.147
• /
• pp.392-398
• /
• 2006

A prototype of MES(Manufacturing Execution System) applied to panel assembly shop is implemented by using PDA(Personal Digital Assistant) and wireless database web server. The system is developed based on the Dot Net framework. The prototype can exchange the manufacturing execution data between production managers in the control room and workers in the factory through wireless internet communication. Manufacturing model of the panel shop is designed by using IDEF0 and UML method to understand the characteristics of the information and the data entities from the PPR-S view. Several issues in the shop were revealed from the manufacturing model analysis. The most typical problem was the lack of information sharing between the managing workers and the assembly workers. The problem prevents the workers and labors from sharing the process information and continuous workpiece flow In interactive way. To increase the information and data flow, a wireless internet based system is implemented and PDAs are linked together to exchange the process planning data and in-process data between the workers. It is anticipated that PDA and the implemented system can enable the process control at each process stages to obtain the well-organized operation.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.105-112
• /
• 1992

The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analysis. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made. Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. To determine the proper test conditions, the pre-test analysis has been performed using the general purpose structural analysis program ANSYS. Also the effects of the number of master degrees of freedom, holes in the web and tie-rod preload on the natural frequencies are examined prior to the pre-test analysis. After decision of appropriate finite element model, frequency analysis and harmonic analysis are performed and ideas for the test conditions such as the number of measurement points, their locations, measurement frequency range and the excitation force level are determined.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.25-33
• /
• 2013

Digital certificate must be used for electronic financial transactions in Korea. But because digital certificate is based ActiveX of Internet Explorer, it is difficult to use digital certificate in other web browsers. It interrupts a development of various authentication technology and a growth of related industry. Also digital certificate can be leaked because of being stored in harddisk or USB. The government eased obligatory use of digital certificate and opened doors to other authentication techniques. But any other authentication techniques are not used because they are not approved as alternative technology. The revised bills with digital certificate abolition as the main agenda have been submitted to the National Assembly. Whether the revised bills pass or not will be decided by a regular session of the National Assembly depending on the calculation and dynamics composition of related industry. In this paper, a controversy over obligatory use of digital certificate is examined and measures are found.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.243-247
• /
• 2004

The dynamometers which had made in a long time ago could not control the input/output quantity of water minutely and was sensitive to a noise since it was controlled by an analog control method. Therefore, a fully digital controlled system was urgently required to be robust against various noises. In this paper, the new system which can control the amount of circulated water in dynamometer was developed. This system is consisted of an industrial digital type controller and a servo motor. The industrial PLC was used as a main controller for the developed system, and the actuator and servo motor were used to control the inlet and outlet valve independently. The torque signal of load cell was fed back to the main controller to regulate the diesel engines load. Generally, an input/output valve position of the old dynamometer was fixed with a proper situation for an engine output test and the torque was changed according to the time interval. However, the torque value for the dynamometer could not be constantly kept because of the variation of the input water flow and fluid characteristic. Therefore, the automatic control of an inlet and outlet valve should be performed to keep the constant torque. So, the PID control method was applied to solve this problem. Also, the development of a web-based remote control system was described in this paper. This software will give us the convenience of operation, the more efficient operations, and the reduced operator workload for operation of the dynamometer. The application results of the system have been verified at actual diesel engine field.

• Journal of Fashion Business
• /
• v.21 no.1
• /
• pp.134-147
• /
• 2017

The purpose of this study is to analyze fashion brands' contents and characteristics of the participation platform of users, to assess the types and strategies of mass customization(MC). Most fashion brands sell one professional content: Shoes brands were the most common, followed by bags, unisex wear, and menswear. In consumer's design selection elements, changes in color and materials were the most common. For the personalization service elements, monogram service was the most common. The results of MC types analysis were as follows, Customized Standardization was the most common, followed by Tailored Customization, Pure Customization, and Segmented Standardization. For the types according to changes in products and expression methods, Cosmetic was the most common. And the classification according to modulation, Modularizers were the most common. For Creativity, brands in the making stage were the most common. For Flexibility, although brands different methods, high flexibility by modularizing design elements of products and accomplishing various design through participation. The Ease of use for various expression was generally high, parallel to Flexibility. For Durability, because consumers could receive end products only when they participated in the assembly stage in the on-line purchase, their continuous participation was not possible, so they participated only once. The typical types and strategy of MC were analyzed. The Customized Standardization type was the most common in shoes, bag, and womenswear brands. It was the Cosmetic type which could change colors and materials, the Modularizers, and had high Flexibility and Ease of use and low Durability.

• Journal of Korean Academy of Nursing
• /
• v.45 no.5
• /
• pp.723-732
• /
• 2015

Purpose: The purpose of this study was to develop a system dynamics model for adolescent obesity in Korea that could be used for obesity policy analysis. Methods: On the basis of the casual loop diagram, a model was developed by converting to stock and flow diagram. The Vensim DSS 5.0 program was used in the model development. We simulated method of moments to the calibration of this model with data from The Korea Youth Risk Behavior Web-based Survey 2005 to 2013. We ran the scenario simulation. Results: This model can be used to understand the current adolescent obesity rate, predict the future obesity rate, and be utilized as a tool for controlling the risk factors. The results of the model simulation match well with the data. It was identified that a proper model, able to predict obesity probability, was established. Conclusion: These results of stock and flow diagram modeling in adolescent obesity can be helpful in development of obesity by policy planners and other stakeholders to better anticipate the multiple effects of interventions in both the short and the long term. In the future we suggest the development of an expanded model based on this adolescent obesity model.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.4
• /
• pp.47-58
• /
• 2011

The purpose of this study was to analyses the main factors of research papers for related with home physical therapy. This study was retrospective descriptive study, the period of data collection was from 1991 to 2011. The data was collected by the journal related in physical therapy, the dissertation of academic degree, National Assembly Library and the web-site for academic information. In the web-site, searched with the keyword 'home physical therapy' and 'after school voucher'. The results were as follows; 1. In the home physical therapy, visiting physical therapy, school physical therapy, there were different based on laws; home physical therapy was based on medical law, visiting physical therapy was based on law for community health and law for long term health insurance, school physical therapy was based on special education law. 2. The summary of research title/thema from 1991 to 2011 was as follows; for the home and visiting physical therapy 'the needs and necessity of home and visiting physical therapy' was 18 papers, 'the contents of service of home and visiting physical therapy' was 18 papers, 'program and skill development' was 16 papers, 'system developing and induction strategy of home and visiting physical therapy 'was 15 papers, 'costs of nome and visiting physical therapy' was 2 papers, 'perception and information of home and visiting physical therapy' was 9 papers, 'Recoding system and administration management' was 9 papers, 'the others 'was 14 papers, for the school physical therapy 'after school voucher system' was 9 papers, the others was 4 papers. The total papers was 114 papers. 3. Finally suggested 'Model of Educational Program for HomeVisiting and School Physical Therapy'.