• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.272-278
• /
• 2010

The purpose of this study was to research about Dobby weave design using Computer-Aided Weaving System. For performing this design study, first, it was researched the characteristics of the classified woven fabrics, weaving processing, structure of Dobby loom, and Computer-Aided Dobby Weaving system theoretically. To develop Dobby woven design, Patternland Weave Simulator(U.S.A) for computer weave system was used. Among the developed Dobby woven designs by computer weaving system, mainly three of them were selected and woven into Dobby loom. To see the visual image of the fabric end-use, some of the scanned Dobby fabrics were simulated to the three-dimensional virtual images by Alias CAD system. The result of this study can be summarized as follows. Before the step of weaving Dobby fabrics on the woven design works, Computer-Aided Weaving system can be done very easily to apply the design step of Dobby woven fabrics, specially in case of the complicated woven structure. Also the usage of the simulation CAD system in visual image of the final products, ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.23-30
• /
• 2005

The air-jet loom represents a major step in the development of shutterless weaving due to its ability to weave a wide range of yarns at high speeds. The air-jet weaving involves inserting a pre-measured length of yarn through the wraps, which is shed by means of compressed air. The analysis of air flow characteristic of the main nozzle and acceleration tube is required for improving the loom performance. In this paper, we examined the effects of the main nozzle with different acceleration tubes as well as diameters. Also, we compared the performance of a straight-type tube with a Laval-type tube and the effect of installing a suction hole on the acceleration tube.

• 한국분무공학회지
• /
• 제8권2호
• /
• pp.16-23
• /
• 2003

The Air-jet loom represents a major step in the development of shutterless weaving due to its ability to weave a wide range of yarns at high speeds. The Air-jet weaving involvers, inserting a pre-measured length of yam through the wrap, is sheds by meads of compressed air. The analysis of air flow characteristic of the main nozzle and acceleration tube is required for the loom performance. h this paper We examined the effect of the main nozzle with different acceleration tubes as well as diameters. And also, we compared the performance of straight type tube with laval type tube and of according to be suction hole on the acceleration tube, respectively.

• 한국의상디자인학회지
• /
• 제12권3호
• /
• pp.43-55
• /
• 2010

The major advantages to use CAD System are that it reduce time and effort to manufacture products, and also can demonstrate the condition of the final product prior to the actual manufacturing process of the selected design using the simulation programs in CAD system. Specially in weave design, for use as Computer-Aided Weaving system, the complicated Dobby weave can figured out easily through calculating the complex weave plans of multi shafts. As to one of dobby weave structures, Supplementary warp is the warp threads which are in addition to the regular warps of the woven fabrics, and used for decorating the band or expressing some patterns. The purpose of this study is to research the weave design of Supplementary warp using Computer-Aided Weaving system, which is dobby weave design program of Weave Point. For performing this design study, it was researched the classified woven fabrics depending upon weaving processing, Computer-Aided Weaving system, and the characteristic of Supplementary warp fabrics. On the basis of the theoretical research, Supplementary warp was worked for the 24-shafts AVL computer dobby loom that applied to the various patterned images. The design work was done by Weave Point program of dobby weave, and simulated to fabrics before woven into the computer dobby loom. To see the visual images of fashion items, these simulated bobby fabrics were processed by three-dimension modeling through YoungWoo CNI CAD system. All the patterns of the Supplementary warp in this study could be applied for decorating the fashion clothing and accessories.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.63-68
• /
• 2008

The hand of the sensitive mixture fabrics was analysed and discussed with measured mechanical properties of two kinds of woven fabrics according to the characteristics of air-jet loom. The 16 mechanical properties such as tensile, bending, shear, compression and surface were measured using KES-FB system and their differences of the mechanical properties between domestic and foreign looms were analysed with the deviation according to the position of the specimen. And also these mechanical properties according to the domestic and Japan air-jet looms were analysed and discussed with warp and weft insertion tensions during weaving. This research is aiming to make a data base of fabric mechanical properties and, these analysed data are given to weaver as a basic research data related to the effects of loom characteristics to the sensitive mixture fabrics required from weaving fields.

• 한국의류산업학회지
• /
• 제7권6호
• /
• pp.673-679
• /
• 2005

This study surveys the fabric surface properties such as mean value of the coefficient of friction(MIU), mean deviation of the coefficient of friction(MMD) and mean deviation of surface roughness(SMD) due to warp and weft tension differences using KES-FB system. For this purpose, fabric is designed as 5 harness Satin weave using 150d/48f warp and 200d/384f weft polyester filaments, and is woven by Omega$^{(R)}$ rapier loom by Textec Co.Ltd and Vamatex-P1001ES$^{(R)}$ rapier loom by Vamatex Co.Ltd respectively. These grey fabrics are processed on the same dyeing and finishing processes. The fabric surface properties according to the weaving looms are analysed with warp and weft weaving tensions. And also surveyed the difference of fabric surface properties according to the fabric positions such as center and each edge of fabrics for the sensitive garment. Fabric thickness was also measured and discussed according to the fabric positions such as center and each of fabrics with two looms weaving tensons.

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.36-44
• /
• 2004

This research surveys the differences of fabric mechanical properties according to the different looms and the fabric positions with relation to warp and weft weaving tensions on the Picanol and Omega looms respectively. For this purpose, the grey fabrics woven in the previous paper are processed in dyeing and finishing processes, and the processing shrinkages are measured on each processes such as dryer, scouring, pre-set, dyeing and final-set using the fabric density and width. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of the two looms and the variations of the fabric mechanical properties according to the fabric positions are also discussed. In addition, the fabric thickness according to the fabric positions such as right, left selvedges and center of the fabrics is also measured and discussed with the characteristics of the Picanol and Omega looms.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.324-328
• /
• 1987

In this study a computer-aided textile pattern design system is implemented and a control methodology of a dobby motion is studied. The described system allows the user to design various weave patterns through graphic editor and to simulate weaving by displaying the dummy weaving process on the monitor. In addition, if the yarn colors are specified it is also possible to analyze color weaves. Thus it can replace effectively a conventional. design tool, a design paper. The main features of the system are to design weave patterns, to show weaving effect, and to make lifting plan for the dobby motion control. In dobby motion control, the mechanical. control method conventionally used is not adequate for the loom which is linked with the computer-aided textile pattern design system, so an electromagnetic control method is proposed.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.106-110
• /
• 2005

This research surveys the mechanical properties of worsted fabrics for garment according to the loom characteristics and fabric positions with relation to the warp and weft weaving tensions on the projectile and air-jet looms, which is previously surveyed in the 1st paper. For this purpose, the grey fabrics are processed in dyeing and finishing processes. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of projectile and air-jet looms and the variations of the fabric mechanical properties according to the fabric positions are also surveyed for investigating the homogeneity of the tailorability and fabric hand.

• 한국의류산업학회지
• /
• 제6권6호
• /
• pp.772-777
• /
• 2004

This research surveys the mechanical properties of worsted for garment according to the loom characteristics and fabric positions with relation to the warp and weaving weft tensions on the 3 types of rapier looms, which is previously surveyed in the 1st paper. For this purpose, the grey fabrics are processed in dyeing and finishing processes. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of 3 types of rapier looms and the variations of the fabric mechanical properties according to the fabric positions are also surveyed for investigating the homogeneity of the tailorability and fabric hand.