• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.134-141
• /
• 2009

Recently, many researchers have tried to develop wearable robots for various fields such as medical and military purposes. We have been studying robotic exoskeletons to assist the motion of persons who have problems with their muscle function in daily activities and rehabilitation. The upper-limb motions (shoulder, elbow and wrist motion) are especially important for such persons to perform daily activities. Generally for shoulder motion 300F is needed to describe its motion(extension/flexion, abduction/adduction, internal/external rotation) but we have used a redundant actuator thus making a 4 DOF system. In this paper, we proposed the mechanism design of the exoskeleton which consists of 4-DOF for shoulder and 1-DOF for elbow robotic exoskeleton to assist upper-limb motion. Then we compared the new mechanism design and prototype mechanism design. Here we also analyze the proposed system kinematically to find out and to avoid the singular point. This research will ensure that the proposed wearable robot system make human's motion more powerfully and more easily.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1625-1626
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.85-86
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1597-1598
• /
• 2011

• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.471-477
• /
• 2022

Objective: The greatest motor impairment after stroke is a decreased ability to walk. Most stroke patients achieve independent gait, but approximately 70% do not reach normal speed, making it difficult to reach a standard of daily living. Therefore, a wearable exoskeleton is recommended for optimal independent gait because different residual disorders hinder motor function after stroke. This review synthesized the effect on gait speed in randomized controlled trials (RCTs) in which gait training using a wearable exoskeleton was performed on post-stroke patients for qualitative and quantitative analysis. Design: A systematic review and meta-analysis of a randomized controlled trials Methods: RCTs using wearable exoskeletons in robotic rehabilitation of post-stroke patients were extracted from an international electronic database. For quality assessment and quantitative analysis, RevMan 5.4 was used. Quantitative analysis was calculated as the standardized mean difference (SMD) and presented as a random effect model. Results: Five studies involving 197 post-stroke patients were included in this review. As a result of the analysis using a random effect model, gait training using a wearable exoskeleton in post-stroke patients showed a significant improvement in gait speed compared to the non-wearing exoskeleton (SMD=1.15, 95% confidence interval: 0.52 to 1.78). Conclusions: This study concluded that a wearable exoskeleton was more effective than conventional gait training in improving the gait speed in post-stroke patients.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.421-426
• /
• 2015

Need to develop human body's posture supervised robots, gave the push to researchers to think over dexterous design of exoskeleton robots. It requires to develop quantitative techniques to assess human motor function and generate the command to assist in compliance with complex human motion. Upper limb rehabilitation robots, are one of those robots. These robots are used for the rehabilitation of patients having movement disorder due to spinal or brain injuries. One aspect that must be fulfilled by these robots, is to cope with uncertainties due to different patients, without significantly degrading the performance. In this paper, we propose chattering free sliding mode control technique for this purpose. This control technique is not only able to handle matched uncertainties due to different patients but also for unmatched as well. Using this technique, patients feel active assistance as they deviate from the desired trajectory. Proposed methodology is implemented on seven degrees of freedom (DOF) upper limb rehabilitation robot. In this robot, shoulder and elbow joints are powered by electric motors while rest of the joints are kept passive. Due to these active joints, robot is able to move in sagittal plane only while abduction and adduction motion in shoulder joint is kept passive. Exoskeleton performance is evaluated experimentally by a neurologically intact subjects while varying the mass properties. Results show effectiveness of proposed control methodology for the given scenario even having 20 % uncertain parameters in system modeling.

• 한국의류학회지
• /
• 제48권2호
• /
• pp.312-327
• /
• 2024

In this study, a rehabilitation 3D printed wearable device was developed by combining an assembly-type robot hand and an integral-type robot hand through fused deposition 3D printing manufacturing with various hardness TPU (Thermoplastic Polyurethane) filaments. The hardware configuration of the robot hand includes a controller designed with four motors, one small servo motor, and a circuit board. In the case of the assembly-type robot hand model, a 3D printed robot hand was assembled using samples printed with TPU of hardness 87A and 95A. It was observed that TPU with a hardness of 95A was suitable for use due to shape stability. For the integrated-type robot hand model, the external sample using TPU of hardness 95A could be modified through a cutting method, and the hardware configuration is the same as the assembly-type. The system structure of the 3D printed robot hand was improved from an individual control method to a simultaneous transmission method.Furthermore, the system architecture of an integrated 3D printed robotic hand rehabilitation device and the application of the rehabilitation device were developed.

• 한국지능시스템학회논문지
• /
• 제26권3호
• /
• pp.176-181
• /
• 2016

본 논문은 EMG(Electromyogram) 신호 기반의 웨어러블 기기를 이용하여 화재 감지 자율 주행 로봇을 제어하는 시스템을 제안하였다. 사용자의 EMG 신호를 읽어내기 위한 기기로는 Myo armband를 이용하였다. EMG 신호의 데이터를 블루투스 통신을 이용하여 컴퓨터로 전송한 후 동작을 분류하였다. 그 후 다시 블루투스를 이용하여 분류한 데이터 값을 uBrain 로봇으로 전송해 로봇이 움직일 수 있도록 구현하였다. 로봇을 조종 가능한 명령으로는 직진, 우회전, 좌회전, 정지를 구성하였다. 또한 로봇이 사용자로부터의 블루투스 신호를 받아오지 못하거나 사용자가 주행모드 변경의 명령을 내리면 로봇이 자율 주행을 하도록 하였다. 로봇이 주변을 돌아다니면서 적외선 센서로 화재를 감지하면 LED를 깜빡여 로봇 주변의 상황을 확인할 수 있도록 하였다.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.111-116
• /
• 2019

With the recent acceleration of industrial technologies and active research, wearable robot technologies have been applied to various fields. To study the utility of wearable robots, basic research on kinetic mechanisms of the human body, bio-signal analysis, and system control are essential. In this study, we investigated the basic structure of a wearable system and the operating principles of a driving mechanism. The control system and supporting structure, which comprise the driving mechanism, were designed and manufactured. Motion and load analyses were performed simultaneously for the design of the kinematic drive, and the driving mechanism was constructed by analyzing walking motion. The operating conditions of the cylinder were verified by stride via driving experiments. Further, the accuracy and responsiveness of the system were confirmed by comparison with actual motion, and the system safety was validated by applying loads.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.427-428
• /
• 2013