• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권3호
• /
• pp.174-180
• /
• 2009

A new flexible electronics technology, named P-FCB (Planar Fashionable Circuit Board), is introduced. P-FCB is a circuit board technology implemented on the plain fabric patch for wearable electronics applications. In this paper, the manufacturing of P-FCB, and its electrical characteristics such as sheet resistance, maximum current density, and frequency characteristics are reported. The fabrication methods and their electrical characteristics of passive devices such as resistor, capacitor, and inductor in P-FCB are discussed. In addition, how to integrate silicon chip directly to the fabric for the flexible electronics system are described. Finally, examples of P-FCB applications will be presented.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.280-286
• /
• 2007

The wearable sensor glove was developed using EDA sensors and conducting fabric. EDA(Electro-dermal Activity) signal is an electric response of human skin. There are SIL(Skin Impedance Level) and SIR(Skin Impedance Response) in EDA. SIL consists mostly of a DC component while SIR consists of an AC component. The relationship between drowsiness and the EDA signal is utilized. EDA sensors were made using a conducting fabric instead of AgCl electrodes, for a more suitable, more wearable device. The EDA signal acquisition module was made by connecting the EDA sensor gloves through conductive fabric lines. Also, the EDA signal acquisition module can be connected to a PC that shows the results of the EDA signal processing analysis and gives proper feedback to the user. This system can be used in various applications to detect drowsiness and prevent accidents from drowsiness for automobile drivers.

• 대한의용생체공학회:의공학회지
• /
• 제32권1호
• /
• pp.37-44
• /
• 2011

This paper describes the development and assessment of conductive fabric sensor for evaluating knee movement using bio-impedance measurement method. The proposed strip-typed conductive fabric sensor is compared with a dot-typed Ag/AgCl electrode for evaluating validity under knee movement condition. Subjects are composed of ten males($26.6{\pm}2.591$) who have not had problems on their knee. The strip-typed conductive fabric sensor is analyzed by correlation and reliability between a dot-typed Ag/AgCl electrode and the strip-typed conductive fabric sensor. The difference of bio-impedance between a dot-typed Ag/AgCl electrode and the strip-typed conductive fabric sensor averages $7.067{\pm}13.987\;{\Omega}$ As the p-value is under 0.0001 in 99% of t-distribution, the strip-typed conductive fabric sensor is correlated with a dot-typed Ag/AgCl electrode by SPSS software. The strip-typed conductive fabric sensor has reliability when it is compared with a dot-typed Ag/AgCl electrode because most of bio-impedance values are in ${\pm}1.96$ standard deviation by Bland-Altman Analysis. As a result, the strip-typed conductive fabric sensor can be used for assessing knee movement through bio-impedance measurement method as a dot-typed Ag/AgCl electrode. Futhermore, the strip-typed conductive fabric sensor is available for wearable circumstances, applications and industries in the near future.

• 한국전자파학회논문지
• /
• 제22권8호
• /
• pp.754-760
• /
• 2011

본 논문에서는 직물형 회로 기판상에 설계된 U-슬롯을 갖는 빔 조향(beam steering) 마이크로스트립 패치(microstrip patch) 안테나를 제안하였다. 본 안테나는 직물형 회로 기판 및 의복상에 제작하는 것을 목적으로 설계되었으며, 동작 주파수 6.0 GHz에서 빔 조향이 가능하도록 설계되었다. 빔 조향을 위해 U-슬롯과 간접적 급전(in-direct feed) 방식이 적용되었으며, 안테나 패치 부분과 간접 급전부 사이에 두 개의 가상 스위치(line connection)을 이용하였다. 두 개의 가상 스위치 조합($S_0$, $S_1$, $S_2$)에 따라, 최대 빔 방사 방향은 yz-평면상에서 ${\theta}=0^{\circ}$, $30^{\circ}$, $331^{\circ}$, 세 방향으로의 빔 조향이 가능하다. 전체 반전력 빔 폭(HPBW)에 의한 빔 커버리지는 약 $115^{\circ}$이고, 빔 조향시 6.11~6.69 dBi의 최대 이득(peak gain)을 갖는다.

• Advances in nano research
• /
• 제9권2호
• /
• pp.123-131
• /
• 2020

Conventional fabrics that have modified in to conductive fabrics using conductive nanomaterials have novel applications in different fields. These of fabrics can be used as heat generators with the help of the Joule heating mechanism, which is applicable in thermal therapy and to maintain the warmth in cold weather conditions in a wearable manner. A modified fabric can also be used as a sensor for body temperature measurements using the variation of resistance with respect to the body temperature deviations. In this study, polyol synthesized silver nanowires (Ag NWs) are incorporated to commercially available cotton fabrics by using drop casting method to modify the fabric as a thermogenic temperature sensor. The variation of sheet resistance of the fabrics with respect to the incorporated mass of Ag NWs was measured by four probe technique while the bulk resistance variation with respect to the temperature was measured using a standard ohm meter. Heat generation profiles of the fabrics were investigated using thermo graphic camera. Electrically conductive fabrics, fabricated by incorporating 30 mg of Ag NWs in 25 ㎠ area of cotton fabric can be heated up to a maximum steady state temperature of 45℃, using a commercially available 9 V battery.

• 센서학회지
• /
• 제31권2호
• /
• pp.79-84
• /
• 2022

Self-powered sensors play an important role in everyday life, and they cover a wide range of topics. These sensors are meant to measure the amount of relevant motion and transform the biomechanical activities into electrical signals using triboelectric nanogenerators (TENGs) since they are sensitive to external stimuli such as pressure, temperature, wetness, and motion. The present advancement of TENGs-based self-powered wearable, implantable, and patchable sensors for healthcare monitoring, human body motion, and medication delivery systems was carefully emphasized in this study. The use of TENG technology to generate electrical energy in real-time using self-powered sensors has been the topic of considerable research among various leading scholars. TENGs have been used in a variety of applications, including biomedical and healthcare physical sensors, wearable devices, biomedical, human-machine interface, chemical and environmental monitoring, smart traffic, smart cities, robotics, and fiber and fabric sensors, among others, as efficient mechanical-to-electric energy conversion technologies. In this evaluation, the progress accomplished by TENG in several areas is extensively reviewed. There will be a discussion on the future of self-powered sensors.

• 전자공학회논문지
• /
• 제53권8호
• /
• pp.119-126
• /
• 2016

본 논문에서는 의복용 무선전력전송 시스템을 구축을 위한 평면형 직물공진기를 제안하고, 공진기에 사용된 의복용 직물기판의 재질별 특성을 분석하였다. 평면형 직물공진기는 공진주파수가 1-10 MHz가 되도록 직물기판 위에 전도성 물질로 루프 및 코일을 평면 설계하였다. 의복용으로 많이 사용되고 있는 폴리에스테르 섬유와 면을 직물기판으로 사용하였으며, 평면 루프와 코일은 동테이프(copper tape)와 실버페이스트(silver paste)로 설계하였다. 자기공진형 무선전력전송 시스템에 적용된 직물의 재질별 특성을 분석하기 위해 송신부와 수신부를 대칭으로 설계하였다. 실험 결과, 낮은 유전상수 및 비교적 두꺼운 두께를 가진 직물기판과 표면저항이 작은 도체성 재질의 패턴(루프 및 코일)으로 제작되었을 때, 의복용 무선전력전송 시스템이 높은 전송효율을 보였다. 본 연구를 통해 제안된 평면형 직물 공진기는 무선전력전송 기술의 영역을 의복용으로 넓힐 수 있는 가능성을 보여주었다.

• 한국의류산업학회지
• /
• 제24권1호
• /
• pp.146-155
• /
• 2022

We proposed a simple process of creating electroconductive textiles by using PEDOT:PSS(Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate))/non-oxidized graphene to coat polyamide or polyurethane knitted fabric for smart healthcare purposes. Electroconductive textiles were obtained through a coating process that used different amounts of PEDOT:PSS/non-oxidized graphene solutions on polyamide/polyurethane knitted fabric. Subsequently, the surface, electrical, chemical, weight change, and elongation properties were evaluated according to the ratio of PEDOT:PSS/non-oxidized graphene composite(1.3 wt%:1.0 wt%; 1.3 wt%:0.6 wt%; 1.3 wt%:0.3 wt%) and the number of applications(once, twice, or thrice). The specimens' surface morphology was observed by FE-SEM. Further, their chemical structures were characterized using FTIR and Raman spectroscopy. The electrical properties measurement (sheet resistance) of the specimens, which was conducted by four-point contacts, shows the increase in conductivity with non-oxidized graphene and the number of applications in the composite system. Moreover, a test of the fabrics' mechanical properties shows that PEDOT:PSS/non-oxidized graphene-treated fabrics exhibited less elongation and better ability to recover their original length than untreated samples. Furthermore, the PEDOT:PSS/non-oxidized graphene polyamide/polyurethane knitted fabric was tested by performing tensile operations 1,000 times with a tensile strength of 20%; Consequently, sensors maintained a constant resistance without noticeable damage. This indicates that PEDOT:PSS/non-oxidized graphene strain sensors have sufficient durability and conductivity to be used as smart wearable devices.

• 감성과학
• /
• 제21권3호
• /
• pp.165-176
• /
• 2018

본 연구는 시 청각 피드백을 통해 아동의 운동 효과를 증진시킬 수 있는 의류형 웨어러블 동작 센싱 및 피드백 시스템을 개발하는 것을 목적으로 한다. 본 연구에서는 직물 센서 제조 및 이를 적용한 스포츠웨어 디자인, 직물기반 동작 센싱 모듈 설계, 아동의 운동 흥미 유발을 위한 시 청각 피드백 시스템 개발 등의 일련의 연구를 수행하였다. SWCNT 기반의 동작 센싱용 신축성 직물 센서를 개발하고, 이를 의복의 사지 관절 부위에 부착한 스포츠웨어를 디자인하였으며, 센싱 모듈을 설계하여 아동을 대상으로 한 관절 동작 실험을 통해 센싱 성능을 검증하였다. 또한 악세서리 형태로 개발된 피드백 제품을 통해 본 연구에서 개발된 스포츠웨어를 착용한 아동의 동작에 따라 빛과 소리로 반응하도록 구현하였다. 본 연구의 결과로, 아동의 운동 흥미를 유발할 수 있는 아동용 스포츠웨어 및 악세서리 제품의 디자인 프로토타입을 제안하였다.

• 한국염색가공학회지
• /
• 제31권2호
• /
• pp.65-76
• /
• 2019

A multi-point touch input sensor having different sizes or different capacitance touch points connected by only one pair of signal transmission lines was fabricated using a polyimide film coated with a thin copper plate. The capacitance increases with the decrease in the number of sheets of fabric spacers placed between the two sheets of the polyimide film. Therefore, the touch input sensor could be manufactured without fabric spacers, which was possible by the action of the polyimide film as a dielectric material in the capacitor. On the multi-point touch sensor, higher capacitance was obtained when pressing wider-area touch points with 10mm to 25mm diameter on average. However, the capacitance of a system comprising two sheets of touch sensors was considerably low, causing a serious overlap of the capacitance values according to the data collected from the reliability test. Although the capacitance values could be increased by stacking several sheets of touch sensors, the overlap of data was still observed. After reducing the size of all touch points to 10mm and stacking up to eight sheets of sensors, reliable and consistent capacitance data was obtained. Five different capacitance signals could be induced in the sensors by pushing touch points simultaneously.