• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.8-15
• /
• 2019

In this study, we synthesized a calcium sulfonate complex grease and a lithium complex grease to investigate their physical, rheological and tribological properties. The thermal stability of the calcium sulfonate was higher than $300^{\circ}C$ and the lithium complex grease was $245^{\circ}C$ in the dropping point test. In the grease viscosity measurement, the calcium sulfonate complex grease was measured as $7.0Pa{\cdot}s$ and the lithium complex grease was as $4.5Pa{\cdot}s$. Therefore, it was confirmed that the calcium sulfonate complex grease is superior to the lithium complex grease in terms of thermal stability and cohesiveness. In the 4-ball wear test, the calcium sulfonate complex grease was measured to be 0.43 mm and the lithium complex grease to 0.85 mm. In the 4-ball extreme pressure test, calcium sulfonate complex grease was measured as 620 kgf and the lithium complex grease was as 125 kgf. Therefore, it was confirmed that the calcium sulfonate complex grease is superior to the lithium complex grease in abrasion resistance and load-bearing property. It was found that the calcium sulfonate complex grease is more effective than the lithium complex grease in the lubrication at high temperature and high load.

• Environmental and Resource Economics Review
• /
• v.30 no.2
• /
• pp.237-268
• /
• 2021

As variable renewable sources rapidly increase due to the Energy Transition plan, integration cost of renewable sources to the power system is rising sharply. The increase in variable renewable energy reduces the capacity factor of existing traditional power capacity, and this undermines the efficiency of the overall power supply, and demand resources are drawing attention as a solution. In this study, we analyzed how much electric vehicle demand resouces, which has great potential among other demand resources, can reduce power supply costs if it is used as a flexible resource for renewable generation. As a methodology, a stochastic form of power system optimization model that can effectively reflect the volatile characteristics of renewable generation is used to analyze the cost induced by renewable energy and the benefits offered by electric vehicle demand resources. The result shows that virtual power plant-based direct control method has higher benefits than the time-of-use tariff, and the higher the proportion of renewable energy is in the power system, the higher the benefits of electric vehicle demand resources are. The net benefit after considering commission fee for aggregators and battery wear-and-tear costs was estimated as 67% to 85% of monthly average fuel cost under virtual power plant with V2G capability, and this shows that a sufficient incentive for market participation can be offered when a rate system is applied in which these net benefits of demand resources are effectively distributed to consumers.

• Journal of Nutrition and Health
• /
• v.44 no.3
• /
• pp.243-254
• /
• 2011

The purpose of this study was to investigate the general characteristics, body shape, and perceptions of weight control in individuals consuming functional health foods and weight-control foods. The survey was conducted between April 15 and June 17, 2010 among 199 (57 males and 142 females; age range, 25-45 years) in Seoul and Gyeonggi-do, who experienced eating functional health foods or weight control foods during the past year (June 2009 to June 2010). The subjects were divided into a weight-control food group (89 adults) and a functional health food group (110 adults). The subjects were comprised of a high proportion of aged (average age, $34.2{\pm}5.9$ years), graduates (71.9%), and married (65.8%) individuals. In the weight control food group, gender, age, and educational background were similar and the ratios of service/technical employees, college students, and normal-weight individuals [body mass index (BMI), < 23] were high. BMI was significantly different by gender (p < 0.001), age (p < 0.01), marital status (p < 0.001), and job type (p < 0.001). Self-perceived health status showed a higher response for "in good health" in the 35-44 year old group than that in the 25-34 year old group (p < 0.05). Male group satisfaction for body shape was significantly higher than that in the female group. The main reason for going on a diet was significantly different by gender (p < 0.05) and BMI (p < 0.01). The main motives for dieting were "because I am not at an ideal weight" and "because of the social atmosphere and the attention of others " in men, but "can't wear the clothes I want" in women (p < 0.01). The most preferable product type related to the two groups was significantly different by job (p < 0.001) and BMI (p < 0.05). However, no significant differences were observed for questions about body shape perception and weight control. Consumers who had different general characteristics and used diet products perceived body shape and weight control differently. Additionally, no meaningful differences were observed when the results were categorized by product type, except job and BMI, but the distribution of consumer characteristics showed different tendencies. These results can be utilized as basic data for developing new diet products to help people control their weight more scientifically and appropriately in the future.

• Journal of Nutrition and Health
• /
• v.50 no.4
• /
• pp.402-414
• /
• 2017

Purpose: The purpose of the study was to evaluate the status of safety accidents and importance-performance analysis (IPA) between regular and non-regular employees in industry foodservices. Methods: The participants were regular employees (n = 119) and non-regular employees (n = 163) in industry foodservices in the Jeonbuk area. Demographic characteristics, status of safety accidents, safety education, and importance and performance status were assessed using a self-administered questionnaire. Results: Approximately 66.4% of regular employees and 53.4% of non-regular employees experienced safety accidents (p < 0.05). Types of safety accidents of regular and non-regular employees were mostly burns, and causes were mostly from their own negligence. Approximately 98.3% of regular employees and 95.1% of non-regular employees experienced safety education. Approximately 88.9% of regular employees and 96.8% of non-regular employees received safety education from dietitians. Approximately 41.9% of regular employees and 50.0% of non-regular employees had difficulty applying the contents of safety education due to lack of time during work. As a result of IPA, regular and non-regular employees were aware of the importance of the following and performed them well: 'Clean the floor of the work place', 'Arrange in the work area', 'Wear safety shoes', 'Check for heater cord', and 'Safety cooking when using oil'. On the other hand, they were not aware of the importance of the following and performed them insufficiently: 'Check for the MSDS', 'Aware of chemical signs', 'Wear protection gloves etc.', 'Do stretching exercise', and 'Using ancillary tools'. Conclusion: Therefore, it is necessary to improve the consciousness of dietitians for effective application of safety education contents, development of contents, especially MSDS, and related things.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.80-87
• /
• 2009

Phase transformation, superelastic characteristics and variation of surface residual stress were studied for Nitinol shape memory alloy through application of UNSM technology, and life extension methods of stent were also studied by using elastic resilience and corrosion resistance. Nitinol wire of ${\phi}1.778$ mm showed similar surface roughness before and after UNSM treatment, but drawing traces and micro defects were all removed by UNSM treatment. It also changed the surface residual stress from tensile to compressive values, and XRD result showed less intensive austenite peak and clear martensite and additional R-phase peaks after UNSM treatment. Fatigue resistance could be greatly improved through removal of surface defects and rearrangement of surface residual stress from tensile to compressive state, and development of surface modification system to improve not only bio-compatability but also resistance to corrosion and wear will make it possible to develop vascular stent which can be used for circulating system diseases which run first cause of death of recent Koreans.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.450-458
• /
• 2012

In order to reduce the effects of greenhouse gas (GHG) emissions, the South Korean government has announced a special platform of technologies as part of an effort to minimize global climate change. To further this effort, the Korean government has pledged to increase low-carbon and carbon neutral resources for biofuel derived from biomass to replace fossil and to decrease levels of carbon dioxide. In general, second generation biofuel produced form woody biomass is expected to be an effective avenue for reducing fossil fuel consumption and greenhouse gas (GHG) emissions in road transport. It is important that under the new Korean initiative, pilot scale studies evolve practices to produce biomass-to-liquid (BTL) fuel. This study reports the quality characteristics of F-T(Fischer-Tropsch) diesel for production of BTL fuel. Synthetic F-Tdiesel fuel can be used in automotive diesel engines, pure or blended with automotive diesel, due to its similar physical properties to diesel. F-T diesel fuel was synthesized by Fischer-Tropsch (F-T) process with syngas($H_2$/CO), Fe basedcatalyst in low temperature condition($240^{\circ}C$). Synthetic F-T diesel with diesel compositions after distillation process is consisted of $C_{12}{\sim}C_{23+}$ mixture as a kerosine, diesel compositions of n-paraffin and iso-paraffin compounds. Synthetic F-T diesel investigated a very high cetane number, low aromatic composition and sulfur free level compared to automotive diesel. Synthetic F-T diesel also show The wear scar of synthetic F-T diesel show poor lubricity due to low content of sulfur and aromatic compounds compared to automotive diesel.

• Fashion & Textile Research Journal
• /
• v.2 no.3
• /
• pp.253-264
• /
• 2000

The purpose of this study was to examine the thermal comfort characteristics of the garments for school, textile and bank worker's uniform. The garments selected for this study were frequently used in Taegu area in terms of design and material used for making garments by the survey for the study The human subject tests were performed to determine the thermal comfort characteristics of garments including thermal, humidity, and wearing sensation and the data were analysed statistically. The results of the study were as follows: 1. According to the result of the survey jacket was mostly used as a school uniform for both male and female high school students. The survey showed that 93% of male students wore 'neck T-shirts' and dimensional fitness for the school uniform got suitable at 2~3 grade high school students. In terms of human subject tests, most students rated 'uncomfortable' in wearing sensation of their school uniform. One of this reason was due to the humidity sensation and air velocity sensation. Level of significance of the thermal sensation for gender difference was higher in hands and feet of the subjects than in chest and thigh of them. 2. According to the result of the survey jacket with zipper was mostly used as a textile worker's uniform. The result of the survey indicated that some textile workers are wearing their inner wear (38.7% for upper and 46.6% for lower). In the human subject tests, about 50% of subjects rated 'comfortable to slightly comfortable' for wearing sensation of the textile worker's uniform. It showed that the female subjects of the humidity sensation was rated higher than the male subjects of the humidity sensation, while the male subjects of the thermal sensation was rated higher than the female subjects of the thermal sensation. There was a closer correlation with the subjective thermal sensation for textile worker's uniform in center parts of the subjects such as back and waist than exposed parts. 3. The result of the survey showed that 70% and 23% of the female banker uniform were blouse and jacket, respectively and 75% and 25% of the male banker uniform were jacket and T-shirt, respectively. All interviewee rated trousers and skirts that were used for their lower. 4. The result indicated that 50% male and 67.7% female subjects for the banker uniform rated 'slightly comfortable for the comfort' sensation. 50% male subjects rated 'neutral' and about 50% female subjects rated 'slightly warm to neutral' for the thermal sensation. In addition, The result showed that 75% male subjects for both upper and lower rated 'neutral' for the humidity sensation and also 75% female subjects rated 'neutral to slightly dry'. Thus, there was no significant different between gender. 5. In the thermal sensation of the subjects for the banker's uniform by parts, 50% subjects rated 'neutral' for their body parts, including head, neck, back, waist, hip, lower arm, and thigh. The extremely cold parts were hands and feet for both male and female subjects.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.174-197
• /
• 2024

Personal ornaments made from precious metals that have been excavated from tombs dating to the Maripgan period (4th-6th century) of the Silla Kingdom are a major subject of analysis in the study of gender and hierarchy among the tomb occupants. Nonetheless, bracelets had been neglected until Ha Daeryong's recent research on determining gender through bracelets attracted attention. Accordingly, an examination and organization of the fundamental elements of Silla bracelets was needed. In response, this paper examines their physical characteristics, appearance, changes over time, and related wearing practices. The data for this study is derived from 176 bracelets, mostly made from silver or gold. Copper and glass bracelets are also included. Many of them were cast in a single-use earthen mold. Even the notched and protruding designs were created by casting rather than carving. Glass bracelets and bracelets with dragon designs were made using molds with round cavities. Excluding those produced using metal sheets, the rest of the bracelets are thought to have been cast in a mold with a long-string-shaped cavity and then bent round. After being bent, the two ends were either soldered together (closed type) or left open (open type). As demonstrated in the study by Lee Hansang, Silla bracelets evolved from plain rounded rod-shaped bracelets, such as the one excavated from the Northern Mound of Hwangnamdaechong Tomb, to versions with notched designs, and eventually to those with protruding designs, which gained popularity by the sixth century. The precedents of plain rounded rod-shaped bracelets are presumed to have been thin rod-shaped bracelets from the Proto-Three Kingdoms period. Bracelets need to be fit to the wrists so that they do not slip off easily when worn. The open type design was the preferable way to achieve this. Moreover, given the ductility of gold, silver, and copper, it seems that it would have been possible to stretch or deform them. In the end, I concluded that even if a bracelet is too small to pass man's hand, the open type could have been worn. Furthermore, if a closed-type bracelet were pressed into an oval shape, it would not be impossible for a man to put it on. When bracelets are divided according to their degree of deformability into type A (the open type) through type D, which is almost impossible to deform, type A is commonly found with wearers of thin hollow earrings, and types C and D (which are difficult to deform) are not found with wearers of thin hollow earrings, but only with wearers of thick hollow earrings. Therefore, it can be seen that men were allowed to wear bracelets, and the existing studies that differentiate between men and women based on the wearing of thin hollow earrings, thick hollow earrings, and swords remain valid.

• Research in Community and Public Health Nursing
• /
• v.9 no.2
• /
• pp.502-517
• /
• 1998

This research intends to survey family environment, health behavior and health status of the students in urban-rural elementary schools and analyze those factors comparatively, and use the result as basic material for school health teacher to teach health education in connection with family and regional areas. It also intends to improve a pupil's self-abilitiy in health care. The subjects involve 2,774 students of urban elementary schools and 583 student in rural ones, who were selected by means of a multi -stage probability sampling. Using the questionnaire and school documents, we collected data on family environment, health behavior and health status for 19 days. Feb. 2nd 1998 through Feb. 20th 1998. The R -form of Family Environment Scale (Moos, 1974) was used in the analysis of family environment(Cronbach's Alpha =0.80). Questionnaires of Health Behavior in School-aged children used by the WHO in Europe(Aaro et al., 1986) and the ones developed by the Health Promotion Committee of the Western Pacific(WHO, 1995)(adapted by long Young-suk and Moon Young-hee(1996)) were used in the analysis of health behavior, as well documents on absences due to sickness, school health room-visits, levels of physical strength, height, weight and degree of obesity were used to determine health status. In next step, We used them with an $X^2$-test, t-test, Odds Ratio, and a 95% Confidence Interval. 1. In two dimensions of three, family-relationship (t=3.41, p=0.001) and system -maintenances(t= 2.41, p=0.0l6) the mean score of urban children were significantly higher than those of rural ones. In the personal development dimension however, there was little significant difference. Assorting family environment into 10 sub-fields and analyzing them, we recognized that urban children were superior to rural children in the sub-fields of expressiveness (t =3.47, p=0.001), conflict (t=0.48, p=0.001), active-recreational orientation (t = 1.97, p=0.049) and organization (t=4.33, p=0.000). 2. Referring to the Odds Ratios of urban-rural children's health behaviors, urban children set up more desirable behavior than rural children wear ing safety belts (Odds Ratio =0.32, p=0.000), washing hands after meals(Odds Ratio = 0.43, p= 0.000), washing hands after excreting (Odds Ratio = 0.39, p=O.OOO), washing hands after coming - home ( Odds Ratio = 0.75, p = 0.003), brushing teeth before sleeping(Odds Ratio =0.45, p=0.000), brushing teeth more than once a day (Odds Ratio =0.73, p=0.0l2), drinking boiled water (Odds Ratio = 0.49, p=0.000), collecting garbage at home(Odds Ratio=0.31, p=0.000) and in the school(Odds Ratio =0. 67, p=0.000). All these led to significant differences. As to taking milk(Odds Ratio = 1.50, p=0.000), taking care of eyesight(Odds Ratio=1.41, p=0.001) and getting physical exercise in(Odds Ratio = 1.33, p=0.0l9) and outside the school(Odds Ratio = 1.32, p=0.005), rural children had more desirable behavior which also revealed a significant difference. There was little significant difference in smoking, but the smoking rate of rural children(5.5%) was larger than that of urban children(3.9%). 3. Health status was analyzed in terms of absences, school health room-visits, levels of physical strength, and the degree of obesity, height and weight. Considering Odds Ratios of the health status of urban-rural children, the health status of rural children was significantly better than that of the urban ones in the level of physical strength(t=1.51, p=0.000) and the degree of obesity(t=1.84, p=0.000). The mean height of urban children ($150.4{\pm}7.5cm$) is taller than that of their counterparts($149.5{\pm}7.9$), which revealed a significant difference (t =2.47, p=0.0l4). The mean weight of urban children($42.9{\pm}8.6kg$) is larger than that of their counterparts($41.8{\pm}9.0kg$), which was also a significant difference(t=2.81, p=0.005). Considering the results above, we can recognize that there are significant differences in family environment, health behavior, and health status in urban-rural children. These results also suggestion ideas for health education. What we would suggest for the health program of elementary schools is that school health teachers should play an active role in promoting the need and importance of health education, develop the appropriate programs which correspond to the regional characteristics, and incorporate them into schools to improve children's ability to manage their own health management.

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.547-553
• /
• 2017

In the current medical field, lead is widely used as a radiation shield. However, the lead weight is very heavy, so wearing protective clothing such as apron is difficult to wear for long periods of time and there is a problem with the danger of lethal toxicity in humans. Recently, many studies have been conducted to develop substitute materials of lead to resolve these problems. As a substitute materials for lead, barium(Ba) and iodine(I) have excellent shielding ability. But, It has characteristics emitting characteristic X-rays from the energy area near 30 keV. For patients or radiation workers, shielding materials is often made into contact with the human body. Therefore, the characteristic X-rays generated by the shielding material are directly exposured in the human body, which increases the risk of increasing radiation absorbed dose. In this study, we have developed the FLUKA transport code, one of the most suitable elements of radiation transport codes, to remove the characteristic X-rays generated by barium or iodine. We have verified the reliability of the shielding fraction of the structure of the structure shielding by comparing with the MCPDX simulations conducted as a prior study. Using the MCNPX and FLUKA, the double layer shielding structures with the various thickness combination consisting of barium sulphate ($BaSO_4$) and bismuth oxide($Bi_2O_3$) are designed. The accuracy of the type shown in IEC 61331-1 was geometrically identical to the simulation. In addition, the transmission spectrum and absorbed dose of the shielding material for the successive x-rays of 120 kVp spectra were compared with lead. In results, $0.3mm-BaSO_4/0.3mm-Bi_2O_3$ and $0.1mm-BaSO_4/0.5mm-Bi_2O_3$ structures have been absorbed in both 33 keV and 37 keV characteristic X-rays. In addition, for high-energy X-rays greater than 90 keV, the shielding efficiency was shown close to lead. Also, the transport code of the FLUKA's photon transport code was showed cut-off on low-energy X-rays(below 33keV) and is limited to computerized X-rays of the low-energy X-rays. But, In high-energy areas above 40 keV, the relative error with MCNPX was found to be highly reliable within 6 %.