• 한국융합학회논문지
• /
• 제9권12호
• /
• pp.273-279
• /
• 2018

본 연구는 굴절이상도와 조도가 써클콘택트렌즈 착용 시 대비감도에 어떠한 영향을 미치는 지 조사하였다. 연구대상자는 총 16명(남5명, 여 11명)을 대상으로 하였다. 대비감도는 나안상태, 써클 콘택트렌즈의 색상별, 검사실의 조도에 따라 측정하였다. 조도에 따른 대비감도는 컬러콘택트렌즈를 착용했을 때 나안상태보다 감소하였고, 암소시보다 명소시일 때 대비감도가 증가하였다. 브라운과 블랙 두 가지 컬러 콘택트렌즈의 대비감도를 비교하였을 때 블랙보다는 브라운 컬러의 콘택트렌즈에서 대비감도가 높았다. 또한 굴절이상유무에 따른 정시안, 근시안, 근시성난시안 대상자의 대비감도 비교에서 정시안대상자에서 조도에 따른 대비감도가 유의한 차이를 보였다. 이는 컬러콘택트렌즈 착용자들의 충분한 이해와 인식이 필요할 것이라고 사료된다.

• 한국산업정보학회논문지
• /
• 제23권6호
• /
• pp.29-38
• /
• 2018

본 논문에서 마네킨에 착용된 의상 이미지를 분할하고 사용자의 사진에 입히는 가상의상착용 (VTON) 기술을 개발하였다. 의상과 모델의 3차원 정보가 필요하지 않는 2차원 이미지 기반 가상착용연구는 실용적인 가치가 크지만, 연구결과 현재 기술로는 의상 분할 시 가림이나 왜곡에 의한 문제 등 제약사항이 존재한다. 본 연구는 마네킨 의상을 사용함으로써 이러한 어려움을 줄였다는 가정 하에서, 딥러닝 기반 영역분할과 자세추정을 통하여 얻은 결과를 사용자 사진에 입히는 알고리즘을 제안하였다. 기존의 연구 대비 성능 개선을 위하여 사전 자세정보의 신뢰성 검사, 외곽선을 이용한 변형개선, 분할 영역개선 등을 사용하였다. 결과로 시각적으로 만족할 만한 의상착용의 경우가 전체의 50%이상으로 상당히 개선된 결과를 얻었다.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.488-496
• /
• 2019

This study investigated if the proper pressure level on the wrist tendon area and muscle area of the lower arm are within the same range by examining the responses of blood flow and subjective evaluation. Subjects consisted of 18 males in their 20s, and the experimental bands were custom-made by applying size measurements of each subject. In the experiment, a total of 5 steps were selected by reducing 10 (Step 1) to 50 (Step 5)% from the original body size in the circumferential direction. Blood flow was measured with a sensor attached to the tip of the finger inside the right hand while sitting in a chair for 15 minutes. Blood velocity began to increase (0.82 kPa) when the wrist circumference around tendon area was reduced by 20% (Step 2) and reached its maximum (1.72 kPa) at Step 4. However, the preferred subjective pressure was 1.36 kPa, which was less than the maximum pressure value of 1.72 kPa for Step 4. Blood velocity began to increase when pressure on the muscle area was 1.38 kPa and reached its maximum at 2.16 kPa; however, the most preferred clothing pressure was 1.71 kPa. The results of this study showed that the appropriate pressure level was higher in the muscle area than in the wrist tendon of the lower arm and indicated that graduated compression is favorable.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.412-419
• /
• 2019

This study is to help maintain the identity of traditional Korean culture and develop fashion culture products by applying images and composition forms of traditional lattice patterns for vest designs. Lattice can be distinguished as a shape created through intersecting vertical and horizontal lines, in the form of oblique lines in vertical and horizontal structures, and in the form of an oblique line. Lattice patterns represent the overall unity and order as well as the beauty of small spaces created by simple lines. Traditional lattice patterns of the Joseon Dynasty were examined theoretically through the literature. Based on theoretical grounds, there is study illustrates vest designs using Adobe Illustrator CS6 as well as works on a 3D virtual costume using CLO Trial 4.2, a 3D virtual dressing system of CLO Virtual Fashion. This study developed an easy to wear vest design categorized as clothes for both men and women. The geometric formality of the lattice pattern has been applied to fashion culture products. In this study, the design was developed focusing on lattice, kotsal (flower pattern), sosulbitsal (diagonal), sotdaesal, tisal (horizontal & vertical). This study can be used as basic data in the domestic fashion cultural product market that can help maintain the originality of Korean culture in the global era that also assists in the successful promotion of Korean culture and traditions.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.163-170
• /
• 2019

Durability of instrument is one of the most important factor to ensure accurate treatment and decrease failure for the orthopedic surgical operation. Normally, a set-screw driver tip has been processed with hard coating for their higher durability and wear resistance. And several surface modification methods were obtained such as titanium nitride (TiN) coating, diamond like carbon coating, other nitriding, and etc. In this study, we have surface modified on set-screw driver tip with TiN and DLC, investigated whether the TiN and DLC coatings affect the mechanical properties and durability of the set-screw driver tip in the pedicle screw system. The surface morphologies were observed with scanning-electron microscopy (SEM), and the static/dynamic torsional properties were investigated with universal testing machine based on ASTM F543. Coating thickness of each coatings were commonly around $1^{\circ}C$. Static torsional stiffness, and ultimate torque values for DLC and TiN coated samples were significantly higher than those of non-coated sample by the pared T-test. Surface morphology of after the dynamic torsional test was more clean with less scratch or friction traces from DLC coating than that of TiN coating and non-coated sample.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.497-508
• /
• 2019

Snowboarder accidents at ski resorts are increasing; therefore, it is essential to wear protective wrist, hip and knee protectors when snowboarding. However, most studies focus on the improvement of gear or expansion of safety facilities with few studies on protectors that directly safeguard the body from accidents caused by tumbling. Protectors currently on the market do not properly consider the needs of the users. Therefore, this study investigates the reality of usage and satisfaction rate of those that use snowboarding protectors along with factors deemed important upon wearing them to provide the grounds for the development of comfortable protectors. Subjects were 1,058 adults in their 20s to 40s. First, a survey was conducted regarding demographic traits as well as the wearing and purchasing of protectors. Second, 325 people that purchased and wore protectors were investigated in regards to the wearing satisfaction rate of current commercial protectors. The results showed that 86% of the 1,058 subjects wore protectors; knee protectors (72%), hip protectors (57%) and wrist protectors (38%). Important factors upon purchasing and wearing satisfaction were studied according to demographic traits, snowboarding experience, and number of snowboard rides for one season. As a result, the damage rate increased along with the number of snowboard rides for one season. Important factors considered when purchasing varied significantly according to sex, age, snowboarding experience, and favored slopes. The results of this study will help in the design of comfortable protectors for snowboarders.

• 복식문화연구
• /
• 제27권4호
• /
• pp.384-397
• /
• 2019

The purpose of this study is to analyze the eco-friendly design characteristics of contemporary children's collections. Photos from FirstviewKorea were utilized for analysis; 29 brands were selected that included children's clothing collections featuring eco-friendly characteristics from 2007 to 2018. The results are as follows. First, naturalness was the most frequent characteristic of environmentally friendly children's collections. It was not conveyed in an eccentric way in any season, showed a relatively uniform distribution, and was seen in various ways, including printed on the fabric and expressed in $appliqu\acute{e}s$ and embroidery. Second, handcrafted features frequently changed according to seasonal trends. Various methods such as beading, embroidery, applique, sewing techniques, and handbags were used, which enhanced manual workability, discrimination from other designs. Third, traditionality is divided into the characteristics of ethnicity and revivalism. National traditions were expressed in the clothing and reflected the current generation while connecting to the past. Fourth, simplicity appeared in classic designs such as simple silhouettes, sparse decoration, natural colors, and comfortable dress length that is not tight on the body. Simplicity was not a frequent feature due to the characteristics of the children's clothing collections. Fifth, playfulness functioned to enhance the children's clothing's wear frequency. Although it was the least frequent of all the characteristics, it seemed to increase the design fun and the clothing's value by fusing with other characteristics such as handcraftedness and naturalness.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.492-501
• /
• 2018

The following results were obtained from a series of studies to accumulate data to reduce the coefficient of friction for press dies by performing tribological tests before and after the UNSM treatment of SM45C. The UNSM-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those for untreated materials. When loads of 5 N, 7.5 N, and 10 N were applied to the untreated material of SM45C, the coefficient of friction was approximately 0.76-0.78. With the large specimen, a value of 0.72-0.78 was maintained at a load of 50 N despite the differences in the size of the wear specimen and working load. Tribological tests of large specimens of SM45C treated with UNSM under tribological conditions of 100 N and 50 N showed that the frictional coefficient and time constant stably converged between 0.7 and 0.8. The friction coefficients of the small specimens treated with UNSM showed values between 0.78 and 0.75 under 5 N, 7.5 N, and 10 N. The friction coefficients of the SM45C treated with UNSM were comparable to each other.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.502-510
• /
• 2018

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

• 한국분말재료학회지
• /
• 제26권2호
• /
• pp.132-137
• /
• 2019

Tungsten carbide (WC) hard materials are used in various industries and possess a superior hardness compared to other hard materials. They have particularly high melting points, high strength, and abrasion resistance. Accordingly, tungsten carbide hard materials are used for wear-resistant tools, cutting tools, machining tools, and other tooling materials. In this study, the WC-5wt.%Co, Fe, Ni hard materials are densified using the horizontal ball milled WC-Co, WC-Fe, and WC-Ni powders by a spark plasma sintering process. The WC-5Co, WC-5Fe, and WC-5Ni hard materials are almost completely densified with a relative density of up to 99.6% after simultaneous application of a pressure of 60 MPa and an electric current for about 15 min without any significant change in the grain size. The average grain size of WC-5Co, WC-5Fe, and WC-5Ni that was produced through SPS was about 0.421, 0.779, and $0.429{\mu}m$, respectively. The hardness and fracture toughness of the dense WC-5Co, WC-5Fe, WC-5Ni hard materials were also investigated.