• Title/Summary/Keyword: Weak Slope

Search Result 144, Processing Time 0.026 seconds

Air Temperature Variation Affected by Site Elevation in Hilly Orchards (구릉지 과원의 고도에 따른 기온변이)

  • 정유란;서희철;윤진일
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.5 no.1
    • /
    • pp.43-47
    • /
    • 2003
  • Air temperature was continuously measured in hilly pear orchards at 4 sites with elevations of 10, 49, 104 and 253 m above sea level. The mean air temperature, averaged over the 10-month period from August 2001 to June 2002, decreased as the site elevation increased by 0.2$^{\circ}C$ per 100 m. This weak lapse condition was amplified during daytime by sun-slope geometry. But on most days an inversion condition began by sunset and persisted until the next sunrise. During the observation period, daily minimum temperature at the valley bottom was lower than that of the hilltop on 67% of the days, and the average temperature difference was 1.4$^{\circ}C$. Inversion of daily minimum temperature under clear sky conditions was stronger in spring and autumn than in winter with a maximum of 6$^{\circ}C$. Lapse condition was predominant in daily minimum temperature on rainy days, and the lapse rate was strongest in winter.

Seasonal Variability of Internal Tides around the Korea Strait: 3-D High-resolution Model Simulation (대한해협주변 내부조석의 계절적 변동성: 3차원 고해상도 모델 연구)

  • Lee, Hyun Jung;Lee, Ho Jin;Park, Jae-Hun;Ha, Ho Kyung
    • Ocean and Polar Research
    • /
    • v.36 no.1
    • /
    • pp.1-12
    • /
    • 2014
  • This study investigates spatial and temporal variations in the generation and propagation of internal tides around the Korea Strait using a three-dimensional high resolution model (Regional Ocean Modeling System; ROMS). The model results were verified through comparison with in-situ current measurements from an array of 12 acoustic Doppler current profilers (ADCPs) deployed in the Korea Strait. Fluxes and distributions of internal tidal energy were calculated using simulation results gathered in February and August. Our analyses reveal that energetic semidiurnal internal tides are generated in a region around the Korea Strait shelf break ($35.5^{\circ}N$, $130^{\circ}{\sim}130.5^{\circ}E$), where the strong cross-slope semidiurnal barotropic tidal currents interact with a sudden topographical change. The semidiurnal internal tidal energy generated in summer displays values about twice as large as values in winter. Propagation of semidiurnal internal tides also reveals seasonal variability. In February, most of the semidiurnal internal tides propagate only into the open basin of the East Sea due to weak stratification in the Korea Strait, which inhibits their southwestward propagation. In August, they propagate southwestward to $35.2^{\circ}N$ along the western channel of the Korea Strait because of strong stratification. In addition, semidiurnal internal tides generated in a region west of Tsushima Island are found to propagate to the coast of Busan. This can be explained by the intensified stratification due to the strong intrusion of bottom cold water in the western channel of the Korea Strait during summer.

A Case Study of Prosthetic Ambulation Training for Upper and Both Lower Extremity Amputated Patient (상지 및 하지절단 환자의 의지보행훈련 증례연구)

  • Hong, Do-Sun;Park, Chang-Ju
    • Journal of Korean Physical Therapy Science
    • /
    • v.7 no.1
    • /
    • pp.367-375
    • /
    • 2000
  • The purpose of this study is to announce the present condition, walking training, and adaptable training of a limb amputated patient. The study is a successful report of the limb amputated patient through the medical treatment of the physical therapy. A cause of the limb amputated patient, a truck driver, was that the patient was hit by a train when the driver alight from the truck. Then, the driver was surgical operated on left AK (Above Knee) amputation and left AE (Above Elbow) amputation by orthopedics at the Young Dong Severance Hospital on Dec.7, 1996. Two weeks after the operation (Dec., 22, 1996), the patient was trained at the Yonsei Medical Center Physical Therapy Hospital for the walking and temper adjust training. It was possible to do a flat surface walking and a slope surface walking without helping due to the patients optimistic personal character and motivation. However, the patient struggled to a dull surface walking and his weak endurance. the patient has several problems when the patient wears artificial legs and hands, fears on fall down, and mentally worries on noise when he walks. It is necessary to approach for this problems by many fields of the helpers, such as Rehabilitation medical doctor, physical therapist, occupational therpist, artificial limbs makers, psychologists, and etc. Therefore, in order for recovering from the amputated parts function after the surgical operation, more approved reports have to be for the amputated patients due to increasing traffic accidents, industrial disaster, cancer, diabetes, obstacles of the peripheral nervous system, and etc.

  • PDF

Effect of Grain Angle on Bending Properties of Pinus densiflora (소나무재의 휨 가공성에 미치는 섬유경사각의 영향)

  • Kim, Jung-Hwan;Lee, Weon-Hee
    • Journal of the Korean Wood Science and Technology
    • /
    • v.29 no.2
    • /
    • pp.118-125
    • /
    • 2001
  • In this study, it was examined the characteristics of bending property of red pine(Pinus densiflora S, et Z.) related to slope of grain. At first, we have investigated the characteristics of wood species for bending property. At second, it was examined the relationships between grain angle and its related bending property. Specimens were made following to grain angle $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $90^{\circ}$, respectively. Dimension of wood materials was $10mm(T){\times}20mm(R){\times}350mm(L)$. Microwave irradiation time for bending process was 30, 60, 90, 120 seconds. The result of this study were as follows ; 1. Grain angle of wood was closely related to Young's modulus on bending process. In the process of bending with various grain angle, wood bending was easily proceed on the high grain angle range. 2. However, the strength of bent wood was very weak when the grain angle was high. Therefore, it was considered suitable grain angle for bending was existed. 3. The characteristics of wood properties for wood bending were very different among wood species.

  • PDF

Ultimate behavior of RC hyperbolic paraboloid saddle shell

  • Min, Chang-Shik
    • Structural Engineering and Mechanics
    • /
    • v.5 no.5
    • /
    • pp.507-521
    • /
    • 1997
  • The ultimate behavior of a reinforced concrete hyperbolic paraboloid saddle shell under uniformly distributed vertical load is investigated using an inelastic, large displacement finite-element program originally developed at North Carolina State University. Unlike with the author's previous study which shows that the saddle shell possesses a tremendous capacity to redistribute the stresses, introducing tension stiffening in the model the cracks developed are no longer through cracks and formed as primarily bending cracks. Even though with small tension stiffening effect, the behavior of the shell is changed markedly from the one without tension stiffening effect. The load-deflection curves are straight and the slope of the curves is quite steep and remains unchanged with varying the tension stiffening parameters. The failure of the shell took place quite suddenly in a cantilever mode initiated by a formation of yield lines in a direction parallel to the support-to-support diagonal. The higher the tension stiffening parameters the higher is the ultimate load. The present study shows that the ultimate behavior of the shell primarily depends on the concrete tensile characteristics, such as tensile strength (before cracking) and the effective tension stiffening (after cracking). As the concrete characteristics would vary over the life of the shell, a degree of uncertainty is involved in deciding a specified ultimate strength of the saddle shell studied. By the present study, however, the overload factors based on ACI 318-95 are larger than unity for all the cases studied except that the tension stiffening parameter is weak by 3 with and without the large displacement effect, which shows that the Lin-Scordelis saddle shell studied here is at least safe.

CORRELATIONS BETWEEN HIPPOCAMPAL THETA RHYTHM AND INTRACELLULAR CHARACTERISTICS OF PYRAMIDAL NEURONS (해마 theta 리듬과 pyramidal neuron의 세포내 특성과의 상관관계)

  • Kwon, Oh-Heung;Kim, Young-Jin;Nam, Soon-Hyeun;Kim, Hyeun-Jung;Lee, Man-Gee;Cho, Jin-Hwa;Choi, Byung-Ju
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.25 no.4
    • /
    • pp.671-682
    • /
    • 1998
  • Electrophysiological phenomena of pyramidal cells in the CA1 area of the dorsal hippocampus were recorded from and filled with neurobiotin in anesthetized rats. The electropharmacological properties of membrane as well as the cellular-synaptic generation of rhythmic slow activity (theta) were examined. The intracellular response characteristics of these pyramidal cells were distinctly different from responses of interneurons. Pyramidal cells had a high resting membrane potential, a low input resistance, and a large amplitude action potential. A afterhyperpolarization was followed a single action potential. Most of pyramidal cells did not display a spontaneous firing. Pyramidal cells displayed weak inward rectification and anodal break excitation. The slope of the frequency-current relation was 53.4 Hz/nA for the first interspike interval and 15.9 Hz/nA for the last intervals, suggesting the presence of spike frequency adaptation. Neurobiotin-filled neurons showed pyramidal morphology. Cells were generally bipolar dendritc processes ramifying in stratum lacunosum-moleculare, radiatum, and oriens. Commissural stimulation discharged pyramidal cells, followed by excitatory and inhibitory postsynaptic potentials (EPSPs and IPSPs). The frequency of theta-related membrane potential oscillation was voltage-independent in pyramidal neurons. At strong depolarization levels (less than 30 mV) pyramidal cells emitted sodium spike oscillation, phase-locked to theta. The observations provide direct evidence that theta-related rhythmic hyperpolarization of principal cells is brought by the rhythmically discharging interneurons. Furthermore, the findings in which interneurons were also paced by rhythmic inhibitory postsynaptic potentials during theta suggest that they were periodically hyperpolarized by their GABAergic septal afferents.

  • PDF

Geology and Ore deposits of Songgwang Mine (송광광산(松廣鑛山)의 지질광상(地質鑛床))

  • Hong, Man Seup
    • Economic and Environmental Geology
    • /
    • v.2 no.3
    • /
    • pp.58-67
    • /
    • 1969
  • Songgwang lead zinc mine is located in about 12km to the north-east of Jeonju City. Geology of the mine and its visinity is consisted of Jeonju series belonged to so-called Okcheon system, Seodaesan tuff formation, Silla series, and the quartz porphyry intruded into these formations. Jeonju series comprising 3 formations; that is, of Sadaeri, Sindong, and Girinbong. Jeonju series is generally distributed in southern part of the area, striking NNW, and diping NE $30^{\circ}$, or NW $30^{\circ}$. It is deformed to form synclinorium and anticlinorium plunging to the north with low angle. In the northern part of the area, Jeonju series was cut by Sinpeongri-fault of NEE direction near Sinpeongri. In the north side of the fault, it is overturned and shows NEE or NWW strikes and NW $60^{\circ}$ dips. At the west of Songgwangri, it is cut by 3 thrusts; the two are almost parallel each other, and the third oneis manifested by the fact that the lower black shale zone thrusted over the upper limestone. Songgwangri thrust, so named, is a post-mineral fault and its plane represents a premineral slip plane. Enrichment of are took place along the bedding plane or fissure parallel to it, as seen in adit No. 1 or No. 2 along the floor of the thrust, and along the sheared zone or the brecciated zone oblique to the plane near the thrust in crystalline limestone of Sindong formation as observed in the underground levels of inclined slope. Ore minerals are chiefly zincblende, galena, pyrrhotite, arsenopyrite, acompanied pyrite and chalcopyrite, and contain Au and Ag. In earlier stage of mineralization, the limestone was recrystalized, and sulphide minerals were enriched in the· permiable zone said above by pyrometasomatism, and in later stage the limestone was affected chloritization and sericitization. However hydrothermal replacement was weak, so that enrichment did not took place. It seems that minerallizing materials came up through the premineral slip plane and injected, and replaced the limestone in permiable zone said above with sulphide are minerals. Then Songgwangri thrust took place and, the lower black shale zone thrusted upon crystalline limestone.

  • PDF

Studies on drying rate, stress and defect with board thicknesses and drying schedules of Quercus grosseserrata B1. (물참나무 판재(板材)두께와 건조(乾燥)스케쥴별 건조(乾燥) 속도(速度), 응력과(應力)과 결함(缺陷)에 관(關)한 연구(硏究))

  • Lee, Sang-Jung;Jung, Hee-Suk
    • Journal of the Korean Wood Science and Technology
    • /
    • v.18 no.1
    • /
    • pp.39-51
    • /
    • 1990
  • This research was carried out to offer the basis data for development of optimum drying schedule for a domestic oak species (Quercus grosseserrata B1.) by investigating drying rate. stress, defect, and moisuture gradient with board thicknesses and drying schedules (code number T4-C2 and T3-B1). The results were obtained as follows: 1. Average drying rate and total drying time from 52.2% to 5.8% were 0.105%/hr and 486 hours for drying schedule T4-C2 and those from 62.1% to 8.3% were 0.070%/hr. and 811 hours for drying schedule T3-B1. 2. Drying rates for 28mm- and 31mm-thick boards showed similar tendency, but were significantly different from 25mm- thick board in drying schedule T4-C2 and those for 22mm-, 25mm- 28mm- and 31mm-thick boards showed similar tendency but were significantly different from 19mm- thick boards in drying schedule T3-B1. 3. The moisture gradients for drying schedule T4-C2 were steeper than those for drying schedule T3-B1 during drying period. and especially in early drying stage slow slope of moisture gradients of drying schedule T3-B1 was effective in preventing serious problem of surface checks. 4. Drying stresses were lower in drying schedule T3-B1 than in drying schedule T4-C2 during drying period. 5. Drying schedule T4-C2 was appropriate for 25mm-thick board but not for 28mm- and 31mm-thick board because of strong drying condition. Drying schedule T3-B1 was appropriate for 28mm- and 31 mm-thick board but not for 19mm-, 22mm-, and 25mm-thick board because of weak drying condition.

  • PDF

Distribution of Fish Larvae and Juveniles in the East China Sea and the Yellow Sea in Spring during 1994-1997 (1994-1997년 봄철 동중국해 및 황해 자치어 분포)

  • KIM Jin Koo;KANG Chung Bae;AHN Geon;OKI Daiju;KIM Yong Uk;TABETA Osame
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.38 no.1
    • /
    • pp.29-38
    • /
    • 2005
  • The distributions of fish larvae and juveniles from the East China Sea, Yellow Sea and near Tsushima Island were investigated in Spring using the Maruchi (1994-1995) and Unagi (1996-1997) nets. A total of 94 species of fish larvae and juveniles belonging to 49 families under 17 orders were identified, of which Engraulis japonicus was dominant in every year except 1995 where Trachurus japonicus was dominant. Cluster analysis based on abundance and species composition by sampling stations (St.) revealed that the similar stations formed an arcuate group from Tsushima Island to southern Jeju Island in 1994, and from the Yellow Sea to southern Jeju Island in 1996. We concluded that these patterns resulted from the influence of the Tsushima Current prevailing in the east, and the Chinese Continental Waters and/or Hwanghae Cold Waters prevailing in the west, with Jeju Island exerting an influence in the centre. The diversity and composition of St. 97-3 and St. 97-5, both located where the Tsushima Current splits from the Kuroshio Current, was greatly different despite their close proximity. However, the former is located on the continental shelf, with the latter on the continental slope. This suggested that both topography and the Kuroshio Current have the most influence on the distribution of fish larvae and juveniles in this region. Furthermore, the weak Hwanghae Cold Waters of 1997 may have also limited the mixing of fish larvae and juveniles between the two stations.

Investigation of Frozen Rock Failure using Thermal Infrared Image (열적외선영상을 이용한 동결된 암석의 파괴특성 연구)

  • Park, Jihwan;Park, Hyeong-Dong
    • Tunnel and Underground Space
    • /
    • v.25 no.2
    • /
    • pp.144-154
    • /
    • 2015
  • Mechanical energy is accumulated in the object when stress is exerted on rock specimens, and the failure is occurred when the stress is larger than critical stress. The accumulated energy is emitted as various forms including physical deformation, light, heat and sound. Uniaxial compression strength test and point load strength test were carried out in low temperature environment, and thermal variation of rock specimens were observed and analyzed quantitatively using thermal infrared camera images. Temperature of failure plane was increased just before the failure because of concentration of stress, and was rapidly increased at the moment of the failure because of the emission of thermal energy. The variations of temperature were larger in diorite and basalt specimens which were strong and fresh than in tuff specimens which were weak and weathered. This study can be applied to prevent disasters in rock slope, tunnel and mine in cold regions and to analyze satellite image for predicting earthquake in cold regions.