• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.4
• /
• pp.227-236
• /
• 1997

Quantitative analysis and imaging of elastic wave propagation are very important for the materials evaluation as well as flaw detection. The elastic wave propagation in an anisotropic media is more complex, and analysis and imaging become essential for flaw detection and materials evaluation. In the anisotropic media, the wave velocity is dependent on the propagation direction. In addition, the direction of group velocity is different from that of phase velocity, the direction of energy flow is not same as the propagation direction of wavefront (beam skewing effect). Especially, this effect becomes critical for the large anisotropic media such as fiber composite materials, and the results using elastic waves for those materials have to be analyzed considering the wave propagation mechanism. Since the analytical approach for the wave propagation in the anisotropic materials is limited, the numerical analysis such as finite difference method (FDM) have been used for these case. Therefore, 2-dimensional FDM program for the elastic wave propagation is developed, and wave propagation in anisotropic media are simulated.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.138-143
• /
• 1994

A speckle correlation method was applied to measure the in-plane translation of a diffuse object which has rough surface using a linear CCD sensor and personal computer. Displacement of a speckle pattern produced from the object illuminated by a laser beam was measured by the cross-correlation functions between the I-D speckle profiles before and after the object translation, which were measured by linear CCD array sensor to be sent to IBM 386 personal computer. The sensitivity of the measurement was dependent on the radius of the wavefront curvature of incident beam as well as the spatial resolution of linear CCD array. A linear CCD array had 15 Jlffi pitch and 1728 pixels. The ratio of the speckle displacement and object translation varied from 1.03 to 5.20. The object translation of $3\mu\textrm{m}$ can be measured br the linear CCD sensor of which pitch was $15\mu\textrm{m}$, when the ratio of the speckle displacement and object translation was 5.20.s 5.20.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.241-247
• /
• 2004

The collimator is necessary for the assembly and evaluation of high resolution satellite telescope. Traditionally, the off-axis paraboloid has been used as a collimator. However, it has some disadvantages in that it can suffer from air turbulence when the focal length of a collimator is long, which may result in some error in the measurement. In contrast, since the Cassegrain type collimator folds the beam, it occupies smaller space compared to the off-axis paraboloid for the same focal length. This can reduce the air turbulence, which can improve the measurement accuracy. In this paper, we explain the process of design and manufacturing of a diameter 450 mm Cassegrain type collimator, to evaluate the diameter 300 mm satellite telescope. After assembly of primary and secondary mirrors, the final wavefront error of the collimator was 0.07λ(λ=633 nm), which is the diffraction limit.

• Korean Journal of Optics and Photonics
• /
• v.26 no.4
• /
• pp.209-216
• /
• 2015

A new method is proposed for optimal management of the fabrication and assembly tolerance of optical systems. The practical utility of the method is shown by applying it to a wide-angle anamorphic IR optical system. In this method the wavefront error of an optical system is expressed in terms of Zernike polynomials, and the sensitivity of the expansion coefficients to the variation of design parameters is analyzed. Based on this sensitivity analysis, the optimal tolerances of the fabrication parameters are determined and the best compensators for the assembly process are selected. By using this method, one can accurately predict with good confidence the best possible performance of a completed optical system in practice.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.63-74
• /
• 2004

This study shows that clothes to be just the same as the real thing can be Produced through the third dimension computer graphics, and then presents that not only the area of fashion design can be expanded in the virtual reality field by doing the simulation of the fashion show, but also the information can be made the real time public ownership and the communication can be fulfilled smoothly. In this study, analyzing the third dimension computer graphic programs to be used much at present, Alias Wavefront Company's Maya software which was the most effective in the clothes simulation and the clothes CAD SGS OptiTex 8.7 which went well substitutive for it were used of them. The conclusions of this study that got through the work manufacture are as follows： The first, if the file manufacturing in the clothes CAD by using the computer was stored, the pattern used 3D simulation was available because it could be summoned in 3D software. The second, if the data of DXF form in Maya program was summoned, they could not be applied by Maya Cloth supported in Nurbs only because they were recognized as the DXF＿layer. So the curve along the outer lines of the pattern was drawn and Maya Cloth was applied to be possible to get the natural silhouette of clothes. The third, when the clothes were manufactured by 3D, if the draping character was applied according to the textile special quality, not only the control of textile's thickness, weight, quality feeling, and silhouette was available, but also the clothes were available to graft the special textile materials. The fourth, the natural motion of model was produced by capturing the actual model's walking action In order to produce the fashion show motion and also the dynamic fashion show was available by the angle of camera, the establishment of lighting, and etc. in the final rendering. The clothes manufactured by 3D are available to change the design by changing the materials, or by adding the details, or by utilizing the special materials on clothes. Therefore, the trial and error following at the clothes manufacture can be reduced. But the elevation of the rendering speed, the price down, the strengthening of personal security, and etc. are required.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.21-27
• /
• 2002

This paper presents a mews event reenactment system (NERS), which generates virtual character animations in a quick and convenient manner. Thus, NERS can be used to produce computer graphics(CG) scenes of news events that are hard to photograph, such as fire, traffic accident, cases of murder, and so on. By using plenty of captured motion data and CG model data this system produces an appropriate animation of virtual characters straightforwardly without any motion capturing device and actors in the authoring stage. NERS is designed to be capable of making virtual characters move along user-defined paths, stitching motions smoothly and modifyingthe positions and of the articulations of a virtual character in a specific frame. Therefore a virtual character can be controlled precisely so as to interact with the virtual environments and other characters. NERS provides both an interactive and script-based (MEL: Maya Embedded Language) interface so that user can this system in a convenient way. This system has been implemented as a plug-in of commercial CG tool, Maya (Alias/wavefront), in order to make use of its advanced functions

• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.169-175
• /
• 2020

We design a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. To maintain the high quality of the SBC beam, we propose a multilayer mirror structure in which the wavefront distortion due to stress accumulation is minimized. Moreover, to prevent light absorption from contamination, an optimized design to minimize the grating thickness was performed. The optimally designed diffraction grating has 99.36% diffraction efficiency for -1st-order polarization-independent light, for incidence at the Littrow angle and 1055-nm wavelength. It is confirmed that the designed diffraction grating has sufficient process margin to secure a polarization-independent diffraction efficiency of 96% or greater.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.521-526
• /
• 2005

We assembled the optical beam director with diameter 300 mm. This consists of primary, secondary mirrors and 5 folding mirrors. Among them, the primary mirror is the most important component so that we measure any possible deformation on it at every step of assembly. Also, we developed the systematic alignment algorithm, which is essential because the number of mirrors is 7. The final wavefront error of the system is 1.9 wave rms (wave=633 nm) which is 7 times larger than we expected. The main source is the deformation of the 131ding mirrors. We expect that what we have learned from the assembly of this system would be helpful when we deal with a larger system in the future.

• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.305-316
• /
• 2003

Recently, an iterative algorithm for finding the interior eigenvalues of a definite matrix by CG-type method has been proposed. This method compares to the inverse power method. The given matrices A, and B are assumed to be large and sparse, and SPD( Symmetric Positive Definite) The CG scheme for the optimization of the Rayleigh quotient has been proven a very attractive and promising technique for large sparse eigenproblems for smallest eigenvalue. Also, it is very amenable to parallel computations, like the CG method for the linear systems. A proper choice of the preconditioner significantly improves the convergence of the CG scheme. But for parallel computations we need to find an efficient parallel preconditioner. Our candidates we ILU(0) in the wave-front order, ILU(0) in the multi-coloring order, Point-SSOR(Symmetric Successive Overrelaxation), and Multi-Color Block SSOR preconditioner. Wavefront order is a simple way to increase parallelism in the natural order, and Multi-coloring realizes a parallelism of order(N), where N is the order of the matrix. Another choice is the Multi-Color Block SSOR(Symmetric Successive OverRelaxation) preconditioning. Block SSOR is a symmetric preconditioner which is expected to minimize the interprocessor communication due to the blocking. We implemented the results on the CRAY-T3E with 128 nodes. The MPI (Message Passing Interface) library was adopted for the interprocessor communications. The test problem was drawn from the discretizations of partial differential equations by finite difference methods. The results show that for small number of processors Multi-Color ILU(0) has the best performance, while for large number of processors Multi-Color Block SSOR performs the best.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.189-193
• /
• 1997

Aspheric pick-up lenses are increasingly used in consumer products such as computer and multimedia, as their mass production has become possible owing to the injection molding process. However still much work needs to be done for more effective manufacture of aspheric lenses, one area of which is the in-line inspection of produced lenses. In this paper, we present a lateral-shearing interferometer that has specially been designed to have a high immunity to external vibration and atmospheric disturbance. The interferometer comprises four prisms. They are directly attached to each other using an immersion oil so that relative sliding motions between the prisms are allowed. Their relative displacement can readily generate necessary lateral-shearing and phase-shifting to determine the wavefront of the beam collimated by the lens under inspection. A special phase-measuring algorithm of arbitrary-bucket is adopted to compensate the phase-shifting error caused by the thickness reduction in the immersion oil. Zernike polynomial fitting has done for determinating quantitative aberration of aspheric pick-up lenses. The interferometer built in this work is robust to external mechanical vibration and atmospheric disturbance so that experimental results show that it has a repeatability of less than λ/100.