• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.48-54
• /
• 2017

In this paper, hysteresis voltage control method is proposed to an unidirectional inverter control for piezoelectric load. Piezoelectric load has electrically RC characteristic, and is driven by the inverter to control the output voltage waveform. When controling the output waveform by PI control, appropriate gains need to be selected. However, hysteresis control may minimize the output distortion because it has maximum proportional gain. In addition, Hysteresis control algorithm has simple structure to realize and the response is fast. Although the switching frequency of the inverter by hysteresis control varies, the switching frequency for the piezoelectric load is lower than that by PI control for equivalent performance. In particular, on implementing the algorithm using FPGA, the algorithm can be implemented in fewer pabrics and the processing time can be reduced. The superiority of the proposed hysteresis voltage control was proved for piezoelectric load through simulation and experiment.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.180-182
• /
• 2001

Input Current Correction of Single-Phase Buck Rectifier is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated-gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.49-53
• /
• 2016

Recently, the use of signal compression methods to improve the efficiency of wireless networks have increased. In particular, the MPC system was used in the pitch extraction method and the excitation source of voiced and unvoiced to reduce the bit rate. In general, the MPC system using an excitation source of voiced and unvoiced would result in a distortion of the synthesis speech waveform in the case of voiced and unvoiced consonants in a frame. This is caused by normalization of the synthesis speech waveform in the process of restoring the multi-pulses of the representation segment. This paper presents an ACFBD-MPC (Amplitude Compensation Frequency Band Division-Multi Pulse Coding) using amplitude compensation in a multi-pulses each pitch interval and specific frequency to reduce the distortion of the synthesis speech waveform. The experiments were performed with 16 sentences of male and female voices. The voice signal was A/D converted to 10kHz 12bit. In addition, the ACFBD-MPC system was realized and the SNR of the ACFBD-MPC estimated in the coding condition of 8kbps. As a result, the SNR of ACFBD-MPC was 13.6dB for the female voice and 14.2dB for the male voice. The ACFBD-MPC improved the male and female voice by 1 dB and 0.9 dB, respectively, compared to the traditional MPC. This method is expected to be used for cellular telephones and smartphones using the excitation source with a low bit rate.

• Journal of Internet Computing and Services
• /
• v.18 no.5
• /
• pp.17-22
• /
• 2017

In a MPC coding using excitation source of voiced and unvoiced, it would be a distortion of speech waveform. This is caused by normalization of synthesis speech waveform of voiced in the process of restoration the multi-pulses of representation section. This paper present PCFBD-MPC( Position Compensation Frequency Band Division-Multi Pulse Coding ) used V/UV/S( Voiced / Unvoiced / Silence ) switching, position compensation in a multi-pulses each pitch interval and Unvoiced approximate-synthesis by using specific frequency in order to reduce distortion of synthesis waveform. Also, I was implemented that the PCFBD-MPC( Position Compensation Frequency Band Division-Multi Pulse Coding ) system and evaluate the SNRseg of PCFBD-MPC in coding condition of 8kbps. As a result, SNRseg of PCFBD-MPC was 13.4dB for female voice and 13.8dB for male voice respectively. In the future, I will study the evaluation of the sound quality of 8kbps speech coding method that simultaneously compensation the amplitude and position of multi-pulse source. These methods are expected to be applied to a method of speech coding using sound source in a low bit rate such as a cellular phone or a smart phone.

• Journal of Internet Computing and Services
• /
• v.19 no.6
• /
• pp.1-7
• /
• 2018

This paper present an 8kbps ACLMS-MPC(Amplitude Compensation and Least Mean Square - Multi Pulse Coding) coding method integrated with ACFBD-MPC(Amplitude Compensation Frequency Band Division - Multi Pulse Coding) and LMS-MPC(Least Mean Square - Multi Pulse Coding) used V/UV/S(Voiced / Unvoiced / Silence) switching, compensation in a multi-pulses each pitch interval and Unvoiced approximate-synthesis by using specific frequency in order to reduce distortion of synthesis waveform. In integrating several methods, it is important to adjust the bit rate of voiced and unvoiced sound source to 8kbps while reducing the distortion of the speech waveform. In adjusting the bit rate of voiced and unvoiced sound source to 8 kbps, the speech waveform can be synthesized efficiently by restoring the individual pitch intervals using multi pulse in the representative interval. I was implemented that the ACLMS-MPC method and evaluate the SNR of APC-LMS in coding condition in 8kbps. As a result, SNR of ACLMS-MPC was 15.0dB for female voice and 14.3dB for male voice respectively. Therefore, I found that ACLMS-MPC was improved by 0.3dB~1.8dB for male voice and 0.3dB~1.6dB for female voice compared to existing MPC, ACFBD-MPC and LMS-MPC. These methods are expected to be applied to a method of speech coding using sound source in a low bit rate such as a cellular phone or internet phone. In the future, I will study the evaluation of the sound quality of 6.9kbps speech coding method that simultaneously compensation the amplitude and position of multi-pulse source.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.47-53
• /
• 2017

There is a difficulty in preventing drunken driving by enforcing alcohol control on the sea due to the environment of Marine transportation rather than roads. In the previous study, we proposed the algorithm, that was developed to identify the voices changed according to be drunk. Using the developed algorithm, it became possible to know the possibility of drinking by long distance ship operators and crew members. In that method drinking can be measured in real time, no matter how far the distance is, if the interception is through a voice that can be transmitted over a distance, rather than a short distance. When communicating voice using the VTS wireless devices, clipping occurs when that environment is uneven, and the rate of judgment of the possibility of drinking may be lowered. Therefore, in this paper, we proposed an enhanced method to compensate the signal in order to reduce the error rate of the possibility of drinking due to distortion of the speech signal.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.3
• /
• pp.116-121
• /
• 2012

Recently, in the field of renewable energy such as solar cells including the semiconductor and display industries, thin film deposition process is being diversified. Furthermore, to deal with trend of making high-quality and fast, the high-capacity and output plasma power supply which can control high density plasma is required. The biggest problem is arc discharge caused by using high voltage power supply. Thus, the key function of plasma power supply is to prevent arc discharge and there is a need to maintain the possible minimum arc energy. In DC sputtering power supply, on a periodic basis (-)voltage powering up is able to significantly reduce arcing, as well as arc discharge prevention, and maintaining uniform charge density. This conventional method for powering up (-)voltage requires heavy mutual inductance of the transformer to avoid distortion problem of the output voltage. This study is about energy recovery circuit for arc discharge prevention in sputtering plasma power supply. By using energy recovery circuit, it is possible to reduce the mutual inductance and size of the transformer dramatically, prevent distortion of the output voltage and has a stable output waveform. This work was proved through simulation and experimental study.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.6
• /
• pp.452-458
• /
• 2019

This study proposes a new test circuit and control method for the submodules of modular multilevel converter (MMC)-based HVDC systems. The test current of conventional submodule test circuits cannot provide the DC offset components or may have some distortion in the linearized current with the DC offset. The proposed scheme can provide not only the DC component but also linearized current without distortion. Therefore, the submodule test current waveform is relatively similar to that of a real submodule consisting of an MMC-based HVDC system. The validity of the proposed circuit and control method is verified through a simulation and experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1278-1284
• /
• 2008

Electric propulsion motors are operated from a variable frequency drive, which supplies power to motors at a frequency appropriate to the desired speed. The objective of this study was to evaluate power converters for shipboard applications and to recommend converters that meet lower harmonic distortion levels and torque ripples. Two systems were studied in detail : Cyclo-converters and PWM-converters. Cyclo-converters are the obvious choice where size, weight and efficiency are the most critical issues. However they have a disadvantage in power factor and they produce severe torque ripples in the motor which makes them unacceptable without special systems. PWM-converters produces better motor current waveform and eliminates common mode voltage issues at the motor, but suffers a multiple stages of power conversion and the isolating transformer. Results of this case study show that PWM-converters are more advanced and efficient drives for induction motor of electric propulsion ship.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.314-317
• /
• 1991

The waveforms of high voltage and current pulse were measured using laser measuring systems. Existing potential transformer and current transformer have low measuring precision because of resonance phenomena and waveform distortion due to the magnetic saturation. But using laser measurement, it is possible to obtain clear waveforms which have no effect of distortion and harmonic resonances. And electromagnetic interferences (EMI) in the measuring of high voltage and current pulse, but the optical measuring systems are not subjet to the influence of EMI. Using laser measuring systems based upon Pockels effect and Faraday effect is not free from any errors yet, but it could replace existing measuring systems by routine experiments and error corrections. And it needs that more research and development of optical crystals and equipments would be taken.