• 제목/요약/키워드: Wave force

검색결과 963건 처리시간 0.026초

유공방파제에 대한 연구 (A Study on a Perforated Breakwater)

  • 이용규;편종근;안수한
    • 물과 미래
    • /
    • 제19권2호
    • /
    • pp.131-138
    • /
    • 1986
  • 단일유공벽의 수리학적 특성 및 동력학적 특성에 대해서 이론 및 실험적으로 연구하였다. 굴구의 이론식을 응용하여 연구한 바에 의하면 산란파항은 파력에 거의 영향을 주지 못함을 알 수 있고 실험에 의한 연구에 의하면 유공율의 변화에 따른 파력의 거동은 매우 민감한 것으로 나타났지만 구멍의 지름에 대한 벽두께의 비(l/D)는 좀 특이한 현상을 보인다. l/D의 값이 작은 범위에서는 유공벽의 구멍을 orifice라고 할 수 있으므로, 파력이 l/D의 변황에 거의 영향을 받지 않고, 이 때의 에너지 손실계수는 굴구의 식을 이용하면 1.0으로 나타난다. 그러나 l/D의 값이 큰 범위에서는 구멍내의 흐름을 관수로의 흐름이라고 볼 수 있으므로 파력이 l/D에 민감하고 이 때의 f는 1.5로 나타났다.

  • PDF

해안안벽과 육상구조물에서 지진해일파의 처오름 및 작용파력에 관한 수치해석 (Numerical Analysis of Runup and Wave Force Acting on Coastal Revetment and Onshore Structure due to Tsunami)

  • 이광호;김창훈;김도삼;;황용태
    • 대한토목학회논문집
    • /
    • 제29권3B호
    • /
    • pp.289-301
    • /
    • 2009
  • 본 연구에서는 Navier-Stokes방정식과 자유수면추적을 위해 도입한 VOF함수의 이류방정식에 기초하고 있는 CADMAS-SURF(CDIT, 2001)에 Fenton(1972)의 3차근사고립파이론에 의한 조파이론을 새롭게 도입한 수치파동수로로부터 직립호안상에서 지진해일(고립파)의 처오름 및 작용파력을 해석한다. 기존의 연구결과와 대비하여 본 수치해석결과의 적용성을 논의하며, 최소자승법에 기초하여 직립호안상에서 최대처오름과 최대파력을 합리적으로 추정할 수 있는 회귀식을 제안한다. 또한, 육상구조물에 작용하는 지진해일(tsunami wave)의 파력산정에 CADMAS-SURF(CDIT, 2001)의 적용을 시도한다. 육상에서 지진해일의 수위변동, 유속 및 파력변동의 특성으로부터 육상구조물에 미치는 지진해일의 직접적인 영향을 추론할 수 있을것이다.

Tethers tension force effect in the response of a squared tension leg platform subjected to ocean waves

  • El-gamal, Amr R.;Essa, Ashraf;Ismail, Ayman
    • Ocean Systems Engineering
    • /
    • 제4권4호
    • /
    • pp.327-342
    • /
    • 2014
  • The tension leg platform (TLP) is one of the compliant structures which are generally used for deep water oil exploration. With respect to the horizontal degrees of freedom, it behaves like a floating structure moored by vertical tethers which are pretension due to the excess buoyancy of the platform, whereas with respect to the vertical degrees of freedom, it is stiff and resembles a fixed structure and is not allowed to float freely. In the current study, a numerical study for square TLP using modified Morison equation was carried out in the time domain with water particle kinematics using Airy's linear wave theory to investigate the effect of changing the tether tension force on the stiffness matrix of TLP's, the dynamic behavior of TLP's; and on the fatigue stresses in the cables. The effect was investigated for different parameters of the hydrodynamic forces such as wave periods, and wave heights. The numerical study takes into consideration the effect of coupling between various degrees of freedom. The stiffness of the TLP was derived from a combination of hydrostatic restoring forces and restoring forces due to cables. Nonlinear equation was solved using Newmark's beta integration method. Only uni-directional waves in the surge direction was considered in the analysis. It was found that for short wave periods (i.e., 10 sec.), the surge response consisted of small amplitude oscillations about a displaced position that is significantly dependent on tether tension force, wave height; whereas for longer wave periods, the surge response showed high amplitude oscillations that is significantly dependent on wave height, and that special attention should be given to tethers fatigue because of their high tensile static and dynamic stress.

FDS-HCIB법을 이용한 고립파에 의한 물체 운동 모사 (Simulation of Body Motion Caused by a Solitary Wave using the FDS-HCIB Method)

  • 신상묵;김인철;김용직
    • 대한조선학회논문집
    • /
    • 제51권4호
    • /
    • pp.265-273
    • /
    • 2014
  • Wave-body interaction is simulated using a developed code based on the flux-difference splitting scheme for immiscible and incompressible fluids and the hybrid Cartesian/immersed boundary method. A free surface is captured as a moving contact discontinuity within a fluid domain and an approximated Riemann solver is used to estimate the inviscid flux across the discontinuity. Immersed boundary nodes are identified inside an instantaneous fluid domain near a moving body, then dependent variables are reconstructed at those immersed boundary nodes based on interpolation along local normal lines to the boundary. Free surface flows around an oscillating cylinder are simulated and the computed wave elevations are compared with other reported results. The generation of a solitary wave by a moving wave-maker is simulated and the time histories of wave elevations at two different points are compared with other results. The developed code is applied to simulate body motion of an elastically mounted circular cylinder as a solitary wave passes the body. The force acting on an elastically mounted cylinder is compared with the force acting on a fixed cylinder. Grid independency of the computed body motion is established based on a comparison of results using three different-size grids.

이어도 종합해양과학기지에 대한 설계파력의 검토 II: 쇄파역에서의 유체력 (Investigation on the Design Wave Forces for Ear-do Ocean Research Station II: Fluid Force in the Breaking Wave Field)

  • 전인식;심재설;최성진
    • 한국해안해양공학회지
    • /
    • 제12권4호
    • /
    • pp.168-180
    • /
    • 2000
  • In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

  • PDF

Wave Force Analysis of the Three Vertical Cylinders in Water Waves

  • Kim, Nam-Hyeong;Cao, Tan Ngoc Than
    • 한국항해항만학회지
    • /
    • 제32권7호
    • /
    • pp.543-552
    • /
    • 2008
  • The diffraction of waves by three bottom fixed vertical circular cylinders is investigated by using the boundary element method. This method has been successfully applied to the isolated vertical circular cylinder and now is used to study the interaction between waves and multiple vertical cylinders. In this paper, a numerical analysis by the boundary element method is developed by the linear potential theory. The numerical analysis by the boundary element method is based on Green's second theorem and introduced to an integral equation for the fluid velocity potential around the vertical circular cylinders. To verify this method, the results obtained in present study are compared with the results computed by the multiple scattering method. The results of the comparisons show strong agreement. Also in this paper, several numerical examples are given to illustrate the effects of various parameters on the wave exciting force such are the separation distance, the wave number and the incident wave angle. This numerical computation method might be used broadly for the design of various offshore structures to be constructed in the future.

$PFC^{3D}$ 상에서의 홉킨슨 효과를 이용한 응력파의 전파모델링 ([ $PFC^{3D}$ ] Modeling of Stress Wave Propagation Using The Hopkinson's Effect)

  • 최병희;류창하
    • 화약ㆍ발파
    • /
    • 제23권3호
    • /
    • pp.27-42
    • /
    • 2005
  • 본 연구에서는 $PFC^{3D}$상에서 공내입자들의 반경을 팽창/수축시키는 기법을 통해 공벽입자들에 접촉력의 형태로 폭발압력을 부여하는 폭원모델링을 기법을 소개하고, 제안된 기법을 이용하여 홉킨슨 효과 효과와 스폴링 현상을 응용하여 암석코어에 대한 응력파의 전파 및 반사과정을 기존의 외력을 적용함으로써 서로 비교하여 보았다. 암석코어는 직경 20m, 길이 200mm의 입자결합체로서 접촉결합을 이용하여 구성하였으며, 시료의 선단에 주기 0.050m$(50{\mu}s)$의 펄스형태의 폭발하중을 기존의 방법과 제안된 폭원모델링 기법을 이용하여 각기 입사시켰다. 해석결과 두 기법은 서로 유사한 결과를 보였으며, 입사압축파는 0.060ms$(60{\mu}s)$ 이후 시료의 후단에서 반사되어 반사인장파의 형태로 되돌아오면서 시료의 축방향과 직각방향으로 인장균열을 발생시켰다. 또한 시료 중을 전파하는 응력파의 속도는 4,167m/s로 계산되어 물리시료에 대한 측정치 4,300m/s와 $3\%$ 정도의 근소한 오차를 보였다.

초대형 부유식 해상공항의 파도에 의한 진동응답특성 해석 (Analysis of wave induced vibration of a typical very large floating-type offshore airport platform)

  • 이현엽;전영기;신현경
    • 한국해양공학회지
    • /
    • 제10권4호
    • /
    • pp.10-16
    • /
    • 1996
  • The vibration due to progressive ocean waves is analyzed for a typical footing-type offshore airport platform. The platform is modelled as a spring-supported Euler beam and buoyancy change due to wave is considered as excitation force, under the assumption that the wave propagates without distortion by the structure. The results show that the natural frequencies of this structure are distributed very closely and are little affected by boundary conditions and that the response charateristics due to ocean waves are quite different according to the wave frequency. In this study, the wave frequencies are divided into three regions; the resonance region at which the response is governed by the resonance between the natural mode at the wave frequency and the corresponding modal component of the wave excitation force, the bending governed region at which the response is governed by the bending stiffness, and the spring (buoyancy) governed region at which the response is governed by the spring constant ahd therefore is same as the incident wave form.

  • PDF

부유식 원형 실린더 배열에 의한 파 상호작용 (Water Wave Interactions with Array of Floating Circular Cylinders)

  • 박민수;정연주;유영준
    • 한국해양공학회지
    • /
    • 제27권5호
    • /
    • pp.51-62
    • /
    • 2013
  • The water wave interactions on any three-dimensional structure of arbitrary geometry can be calculated numerically through the use of source distribution or Green's function techniques. However, such a method can be computationally expensive. In the present study, the water wave interactions in floating circular cylinder arrays were investigated numerically using the eigenfunction expansion method with the three- dimensional potential theory to reduce the computational expense. The wave excitation force, added mass coefficient, radiation damping coefficient, and wave run-up are presented with the water wave interactions in an array of 5 or 9 cylinders. The effects of the number of cylinders and the spacing between them are examined because the water wave interactions in floating circular cylinder arrays are significantly dependent upon these.

랜덤파랑하중에 대한 Guyed Tower의 동적 거동해석 (Dynamic Analysis of Guyed Tower Subjected to Random Waves)

  • 유정선;윤정봉
    • 한국해양공학회지
    • /
    • 제1권1호
    • /
    • pp.57-64
    • /
    • 1987
  • Methods of nonlinear stochastic analysis of guyed towers are studied in this paper. Two different kinds of nonlinearities are considered. They are the nonlinear restoring force from the guying system and the nonlinear hydrodynamic force. Analyses are carried out mainly in the frequency domain using linearization techniques. Two methods for the linearization of the nonlinear stiffness are presented, in which the effects of the steady offset and the oscillating component of the structural motion can be adequately analyzed. those two methods are the equivalent linearization method and the average stiffness method. The linearization of the nonlinear drag force is also carried out considering the effect of steady current as well as oscillatory wave motions. Example analyses are performed for guyed tower in 300m water. Transfer functions and the expected maximum values of the deck displacement and the bending moment near the middle of the tower are calculated. Numerical results show that both of the frequency domain methods presented in this paper predict the responses of the sturcture very reasonably compared with those by the time integration method utilzing the random simulations wave particla motions.

  • PDF