• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.160-173
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (I).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.583-590
• /
• 2015

Submarine cable installation is essentials for grid connection between existing power grid and newly produced electricity which will be from offshore wind farm in Southwest sea area of Korea. Especially, submarine cable route and protection method is designed in order to ensure the economical efficiency, workability and stability of submarine cable installation. On this paper, we will give the basic information about the submarine cable route and protection method of offshore wind farm which will be built in Southwest sea area of Korea. For this, we have a numerical simulation at high and low tide based on the third-generation wave model SWAN(Simulating WAves Nearshore) using the long term wave data from Korea Institute of Ocean Science and Technology(KIOST). The results of the study, year mean Hs is 1.03m, Tz is 4.47s and dominant wave direction is NW and SSW When the incident wave direction is NW(Hs: 7.0 m, Tp: 11.76s), the distribution of shallow water design wave height Hs was calculated about 4.0~5.0m at high tide and 2.0~3.0m at low tide. When the incident wave direction is SSW(Hs: 5.84 m, Tp: 11.15s), the distribution of shallow water design wave height Hs was calculated about 3.5~4.5m at high tide and 1.5~2.5m at low tide. The wave direction on a dominant influence in the section of longitude UTM 249749~251349(about 1.6 km) and UTM 251549~267749(about 16.2 km) in the submarine cable route are each NW and SSW. Prominently, wave focusing phenomenon appears between Wi-do and Hawangdeung-do, in this sea area is showing a relatively high wave hight than the surrounding sea areas.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1217-1222
• /
• 2013

It is very important to diminish noise source of electric motor systems that are used for home appliance area. We have studied on the noise reduction of BLDC motor, mainly focusing on reducing noise source from cogging torque. This noise source causes resonance of fan & motor systems. This study showed that the higher harmonic component of the cogging torque was the main factor for noise generation. Therefor, to reduce noise of bldc motor for refrigerator, this study suggested peanut shaped magnet which surface flux has similar sinusoidal wave form.

• Coupled systems mechanics
• /
• v.7 no.3
• /
• pp.333-351
• /
• 2018

In the present paper, the behavior of the Karaj double curvature arch dam is studied focusing on the effects of structural nonlinearity on the responses of the dam body when an underwater explosion occurred in the reservoir medium. The explosive sources are located at different distances from the dam and the effects of the cavitation and the initial shock wave of the explosion are considered. Different amount of TNT are considered. Two different linear and nonlinear behavior are assumed in the analysis and the dam body is assumed with and without contraction joints. Radial, tangential and vertical displacements of the dam crest are obtained. Moreover, maximum and minimum principal stress distributions are plotted. Based on the results, the dam body responses are sensitive to the insertion of joints and constitutive model considered for the dam body.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.92-99
• /
• 1993

On this study. Constructed the system detecting the reflective acoustic waves from the solid-samples using the 3MHZ focused-acoustic transducer and detected the V(Z) charateristics curves varied by the distance between the focusing position and the solid surface. The results of the experimental detection to various solid materials showed that the materials have their own unique shape of V(Z) curves. This paper suggested the possibility distinguishing the solid characteristics by analysing the V (Z) curves.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.774-779
• /
• 2003

Arc-shaped line array slits have been used for the laser generation of focused Lamb waves. The spatially expanded Nd:YAG pulse laser was illuminated through the arc-shaped line array slit on the surface of a sample plate to generate the Lamb waves of the same pattern as the slit. Then the generated Lamb waves were focused at the point of which distance from the slit position is dependent on the curvature of slit arc. The proposed method showed better spatial resolution than the conventional linear array slit in the detection of laser machined linear defect and drill machined circular defect on aluminum plates of 1mm thickness.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.4
• /
• pp.290-297
• /
• 2015

This research is focusing on the added resistance and seakeeping ability of the designed passenger ship with gooseneck bulb(Designed hull) which provide the improvement of resistance performance under calm water condition. By comparing the added resistances and seakeeping abilities of the reference hull and the designed hull form with gooseneck bulb, it is confirmed that there is little difference in the operational comfort and the reduction of ship speed. As a result, the applied gooseneck bulb in this study is verified for the applicability to medium-sized passenger ships with a good resistance performance.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.241-244
• /
• 2002

This paper presents the electronic ballast for the metal halide lamp with free voltage input and implemented for CDM-T[150W] lamp. HID lamps have a good color rendition, long life and good focusing capability but they have fickers by acoustic resonance when driven at high frequency. To reduce the acoustic resonance phenomena, the electronic ballast was designed for high frequency operation with the constant frequency sinusoidal wave of 75[kHz]. Finally, the experimental results on the ballast of CDM-T [150W]metal halide lamp with the propose methods are discussed.

• Acta Via Serica
• /
• v.4 no.2
• /
• pp.1-27
• /
• 2019

Beginning in the northwestern region of India, and spreading through Central Asia and the rest of Asia along the Silk Road, the making of colossal Buddha statues has been a major theme in Buddhist art. The colossal Buddha statues predominantly feature Śākyamuni (the Historical Buddha), Maitreya (the Future Buddha), and Vairocana (the Transcendant Buddha), and they were fashioned out of religious devotion and frequently in conjunction with notions of Buddhist kingship. This paper examines the religious, social and political circumstances under which these colossal statues were made, focusing on examples from Central and East Asia made during the first millennium CE. Beginning in the 1990s, there was a revival of making colossal Buddha statues across China and elsewhere. The paper also briefly compares the current wave of building colossal Buddha statues with historical examples.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.31.3-31.3
• /
• 2016

Exploring a universe with gravitational waves (GWs) was only theoretical expectation for long time. In September 2015, the Laser Interferometer GW Observatory (LIGO) first detected GWs emitted from the collision of two stellar-mass black holes in cosmological distance (1.3 billion light years) on Earth. This confirms the existence of black-hole binary mergers, and further, opens a new field of GW astronomy. We begin our discussion with a list of important GW sources that can be detectable on Earth by large-scale laser interferometers such as LIGO. Focusing on compact objects such as neutron stars and black holes, we then discuss possible research in the context of GW astronomy. By coordinating with existing observatories, searching for electromagnetic waves or particles from astronomical objects, around the world, multi-messenger astronomy for the universe's most cataclysmic phenomena (e.g. gamma-ray bursts) will be available in the near future.