• Steel and Composite Structures
• /
• 제36권2호
• /
• pp.119-141
• /
• 2020

In this paper, wavy square absorbers were experimentally and numerically investigated. Numerical simulations were performed with LS-Dyna software on 36 wavy absorbers and their crushing properties were extracted and compared with the simple one. The effect of different parameters, including wave height, wave depth, and wave type; either internal or external on the crushing characteristics were also investigated. To experimentally create corrugation to validate the numerical results, a set of steel mandrel and matrix along with press machines were used. Since the initial specimens were brittle, they were subjected to heat treatment and annealing to gain the required ductility for forming with mandrel and matrix. The annealing of aluminum shells resulted in a 76%increase in ultimate strain and a 60% and 56% decrease in yield and ultimate stresses, respectively. The results showed that with increasing half-wave height in wavy square absorbers, the maximum force was first reduced and then increased. It was also found that in the specimen with constant diameter and half-wave depth, an increment in the half-wave height led to an initial increase in efficiency, followed by a decline. According to the conducted investigations, the lowe maximum force can be observed in the specimen with zero half-wave depth as compared to those having a depth of 1 cm.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.60-67
• /
• 2010

Recently, there has been an increase in the construction of various types of coastal structures for efficient wave dissipation, seawater exchange, and so on. Among these, a perforated slit caisson has been widely used to reduce the reflected wave energy and the wave pressure on the structure. Therefore, many studies on the wave force on a caisson, as well as the wave reflection from it, have been carried out with laboratory experiments and numerical analyses, considering it as a 2-D problem. However, because a structure like a perforated slit caisson has a variable 3-D shape, waves forces should be considered as a 3-D problem. Therefore, in this paper, a fully-nonlinear 3-D numerical model (LES-WASS-3D) is proposed to examine the reflection characteristics of a perforated slit caisson with two chambers. The numerical model, LES-WASS-3D, was verified in a 3-D wave field by a comparison with existing experimental data for wave reflection coefficients. Then, using the numerical results, the reflection from a perforated slit caisson with two chambers was examined in relation to wave steepness, chamber width, and the shape/porosity of perforated slit.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.191-196
• /
• 2002

In this paper we introduce novel electrode structure for high efficiency discharge. We operate discharge tube under the 0.16 torr pure Xe and apply the sinusoidal wave power to the lamp with 60kHz. We measure the electric power dissipation, plasma parameters, and 828 nm IR intensity. From these data we determine the discharge efficiency, IR intensity/watt, EEDF(Electron energy distribution function). As a result we obtain that the novel electrode structure has better performance in efficiency than that of conventional external electrode system. Also we determine the EEDF for each type of electrode structure by Boltzmann stover, EELNDIF code. The result of Boltzmann equation solving show that the noble electrode system has many high energy electrons compared with the conventional system.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권4호
• /
• pp.45-51
• /
• 2003

본 연구에서는 경계요소법을 이용하여 불투과성 사다리꼴형상 잠제에 의한 파랑의 반사율과 투과율을 이론적으로 수치해석 하였다. 해석기법으로는 유체와 투과성 영역을 동시에 해석할 수 있는 파압함수를 사용하였으며, 이론적으로 간단히 하기 위해, 투과성 영역내의 파랑의 운동은 선형소산계수와 부가질량계수를 도입하여 정식화하였다. 사다리꼴형상 잠제의 소파특성은 잠제의 법면경사의 변화에 대한 의존도가 높은 것을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• Ocean Systems Engineering
• /
• 제14권2호
• /
• pp.157-169
• /
• 2024

The sudden release of water from a dam failure can trigger bores on a flat surface and exert substantial impact forces on structures. This flow poses a high-risk flood hazard to downstream urban areas, making it imperative to study its impact on structures and devise effective energy dissipators to mitigate its force. In this study, a combination of Genetic Algorithm optimization and numerical modeling is employed to identify the optimal energy dissipator. The analysis reveals that a round arc-shaped structure proves most effective, followed by a triangular shape. These shapes offer wide adaptability in terms of structure dimensions. Structures with higher elevation, especially those with round or triangular shapes, demonstrate superior energy dissipation capabilities. Conversely, square-shaped structures necessitate minimal height to minimize impact forces. The optimal width for dissipating energy is found to be 0.9 meters, allowing for effective wave run-up and propagation. Furthermore, the force exerted on structures increases with higher initial water levels, but diminishes with distance from the dam, highlighting the importance of placement in mitigating impact forces.

• 화약ㆍ발파
• /
• 제41권3호
• /
• pp.1-12
• /
• 2023

근접 폭발로 인해 발생하는 폭발 충격파의 위험을 완화하기 위한 기술에 대한 기초 평가를 수행하였다. 기존의 일반적인 기술로는 폭발물 주변이나 충격파의 진행 방향에 방호물질을 사용하여 차단막을 형성하는 방법이 사용되었다. 다양한 폭발 에너지 분산 메커니즘이 제안되었으며, 임피던스 차이를 활용한 폭발 충격파 완화에 대한 연구가 많은 관심을 받고 있다. 본 연구에서는 전단농화유체(STF)를 충격완화물질로 적용하여 폭발 충격파 완화에 대한 폭발실험 및 수치해석을 통해 STF 완화물질의 효과를 평가하였다. 그 결과로써 STF 완화물질의 폭발 충격압 감쇄성능의 실효성을 확인할 수 있었다.

• 대한토목학회논문집
• /
• 제36권5호
• /
• pp.831-838
• /
• 2016

최근 해안공학분야에서 식생을 활용하는 연안방재시스템에 관한 관심이 증가하고 있다. 이에 본 연구에서는 쓰나미-식생 비선형 상호작용에 의한 파동장과 유동장을 해석하기 위하여 식생항력에 따른 에너지소산을 직접 해석할 수 있는 3차원 수치파동수조를 기존의 3-D N-S solver (LES-WASS-3D ver. 2.0, HYMO-WASS-3D)를 토대로 개발하였다. 그리고 기존의 실험결과와 비교 및 검토를 통한 수치파동수조의 적용성을 평가하였다. 그 결과 레이놀즈수에 따라 능동적으로 추정되는 항력계수를 고려한 경우가 평균 항력계수를 적용한 경우보다 실험에서 얻어진 각 지점의 시간파형을 잘 재현하였다. 또한 식생밀도 및 입사파고에 따라 계산된 고립파의 전달률이 실험의 측정값과 높은 일치도를 나타내었다. 이로써 본 연구에서 식생에 의한 항력으로서 동적항력계수를 적용한 3차원 수치파동수조의 타당성 및 유효성을 확인하였다.

• 대한토목학회논문집
• /
• 제28권5B호
• /
• pp.559-573
• /
• 2008

Navier-Stokes식, Gaussian 분포형 용출함수를 이용한 내부조파, energy absorbing layer로 삼차원 파랑모형을 새롭게 구성하였다. Navier-Stokes식의 수치적분에는 정교한 수치기법인 SPH(Smoothed Particle Hydrodynamics)가 활용된다. 제안된 파랑모형의 검증은 삼차원 포물형 용기에서의 sloshing현상과 Thacker(1981)의 해석해를 토대로 수행되었다. 초기 수면 형상이 Gaussian hump인 경우와 일방향으로 경사진 경우에 대해 수치모의 하였다. 수치모의 결과 수면이 융기되도록 구속한 외부조건이 해제되면서 시작되는 자유진동의 정성적 거동은 비교적 정확히 모의되었으나 시간이 경과될수록 위상차, 침수선이 퇴각하는 등 초기 수면과는 상당히 다른 결과를 보였다. 최종적인 검증은 쐐기모양 해안에서의 비선형 천수, 굴절거동의 수치모의를 토대로 진행되었다. 수치모의 결과 굴절되는 양이 Hamiltonian ray theory가 제공하는 수치보다 전반적으로 작게 나타났다. 이러한 현상은 이상유체와 선형 이론에 기초한 Hamiltonian ray theory에서 간과된 비선형성, 점성으로 인한 양안과 저면에서의 에너지 감쇄, 쇄파 과정에 유동계에 도입되는 에너지 감쇄, 선행파랑에 의한 down-rush와 조우시 발생하는 도수 등에 기인하는 것으로 판단된다.

• 한국표면공학회지
• /
• 제52권2호
• /
• pp.58-61
• /
• 2019

The aim of this study is to quantitatively demonstrate the possibility of heat transfer by thermal radiation by comparing heat transfer by conventional heat transfer and radiation by radiation. 1) The heat transfer was measured by using filler of TIM material with low thermal conductivity (CuS). As a result, heat transfer was easier than ceramic with high thermal conductivity ($Al_2O_3$ and $Si_3N_4$). 2) The reason for this is thought to be that the infrared wave due to radiation of the air diaphragm has moved easily. 3) From the above results, the heat dissipation of the TIM material indicates the possibility of heat transfer by thermal radiation.