Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Improvement of Heat Dissipation Characteristics of TIM Material Using Radiant Energy

복사에너지를 이용한 TIM소재의 방열 특성 향상을 위한 연구

  • Hwang, Myungwon (Departments of Materials Science and Engineering, Pusan National University) ;
  • Kim, Dohyung (Departments of Materials Science and Engineering, Pusan National University) ;
  • Jung, Uoo-Chang (Korea Institute of Industrial Technology, Dongnam Regional Division) ;
  • Chung, Wonsub (Departments of Materials Science and Engineering, Pusan National University)
  • 황명원 (부산대학교 재료공학과) ;
  • 김도형 (부산대학교 재료공학과) ;
  • 정우창 (한국생산기술연구소 동남지역본부) ;
  • 정원섭 (부산대학교 재료공학과)
  • Received : 2019.01.21
  • Accepted : 2019.03.28
  • Published : 2019.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

The aim of this study is to quantitatively demonstrate the possibility of heat transfer by thermal radiation by comparing heat transfer by conventional heat transfer and radiation by radiation. 1) The heat transfer was measured by using filler of TIM material with low thermal conductivity (CuS). As a result, heat transfer was easier than ceramic with high thermal conductivity ($Al_2O_3$ and $Si_3N_4$). 2) The reason for this is thought to be that the infrared wave due to radiation of the air diaphragm has moved easily. 3) From the above results, the heat dissipation of the TIM material indicates the possibility of heat transfer by thermal radiation.

Keywords

PMGHBJ_2019_v52n2_58_f0001.png 이미지

Fig. 1. Schematics diagram of the apparatus for measuring the temperature of sample.

PMGHBJ_2019_v52n2_58_f0002.png 이미지

Fig 2. the high heat-dissipating ceramic composite powder; (A) SEM analysis and (b) EDAX analysis [3].

PMGHBJ_2019_v52n2_58_f0003.png 이미지

Fig 3. The emissivity of the filler used in the experiment

PMGHBJ_2019_v52n2_58_f0004.png 이미지

Fig 4. Change of temperature with time

PMGHBJ_2019_v52n2_58_f0005.png 이미지

Fig. 5. Heat transfer mechanism inside TIM by thermal radiation

Table 1. Composition of samples with various fillers

PMGHBJ_2019_v52n2_58_t0001.png 이미지

Table 2. Temperature(℃) measured at thermocouple

PMGHBJ_2019_v52n2_58_t0002.png 이미지

Table 3. Thermal conductivity of each materials

PMGHBJ_2019_v52n2_58_t0003.png 이미지

References

  1. Jo, S. J, Kim, J. H, Ko, S. W, Lim S. M, Heat dissipation of Al2O3 Insulation layer Prepared by Anodizing Process for Metal PCB, J. Korean Inst. Surf. Eng., 48 (2015) 33-37 https://doi.org/10.5695/JKISE.2015.48.2.33
  2. Choi, B. M, Hong, S. H, Jeong, Y. B, Kim, K, B, Lee S. G, Park, S. G, O, B. H, Improved Thermal Resistance of an LED Package Interfaced with an Epoxy Composite of Diamond Powder Suspended in H2O2, Korean J. Opt. Photon., 25 (2014) 221-224. https://doi.org/10.3807/KJOP.2014.25.4.221
  3. Lee, J. S, Jeon, D. Y, Thermal Interface Materials in Electronic Packages Using Thermal Conducting Properties of Carbon Nanotubes, Polym. Korea, 18 (2007) 542-548
  4. Chung, W. S, Lee, J. H, Lee, K. W, High-heat dissipation ceramic composite, method for manufacturing same, and use thereof, WO2015093825A1, Pusan national university industry-university cooperation foundation, (2013).
  5. X. Zhang and C. P. Grigoropoulos, Thermal conductivity and diffusivity of freestanding silicon nitride thin films, Rev. Sci. Instrum., 66 (1995) 1115. https://doi.org/10.1063/1.1145989
  6. A. E. Mushin, Chemical Vapor Deposition of Aluminium Oxide (Al2O3) and Beta Iron Disilicide (${\beta}$-FeSi2) Thin Films, PhD-Thesis, University of Duisburg-Essen, (2007)