• 대한토목학회논문집
• /
• 제36권6호
• /
• pp.1037-1048
• /
• 2016

본 연구에서는 Navier-Stokes 방정식과 자유수면 추적에 VOF법을 채용하는 CADMAS-SURF를 이용하여 파랑과 흐름의 비선형 상호간섭현상을 연구하였다. 파-흐름 공존장에서의 유체거동 해석을 위해 CADMAS-SURF를 수정 및 확장하였고, 계산치를 실험치와 비교하여 본 연구의 타당성을 확인할 수 있었다. 본 연구의 수치수로를 파랑-흐름 공존장에서 주어지는 복잡한 물리 현상 규명과 파-흐름-잠제의 상호간섭해석에 적용하여, 유속장, 와도장, 자유수면과 와도와의 관계 등을 논의하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.533-544
• /
• 2006

The amplitude and phase lag of surface deformation were determined for a compliant coating under the action of turbulent pressure fluctuations. For this purpose, pressure fluctuations were measured experimentally. The amplitude and duration of coherent wave train of pressure fluctuations were investigated using digital filtration. The transient response was calculated for stabilization of forced oscillations of the coating in approximation of local deformation. The response of coating was analyzed with considerations of its inertial properties and limited duration of coherent harmonics action of pressure fluctuations. It is shown that a compliant coating interacts not with the whole spectrum of pressure fluctuations, but only with a frequency range near the first resonance. According to the analysis, with increasing elasticity modulus of the coating material E, deformation amplitude decreases as 1/E, and dimensionless velocity of the coating surface decreases as $1/\sqrt{E}$. For sufficiently hard coatings, deformation amplitude becomes smaller than the thickness of viscous sublayer, while surface velocity remains comparable to vertical velocity fluctuations of the flow.

• 한국지진공학회논문집
• /
• 제25권1호
• /
• pp.11-20
• /
• 2021

The seismic deformation method is conventionally used as a seismic design for a multi-utility tunnel in Korea. In the seismic deformation method, the soil ground's natural period is one of the most critical factors for calculating the ground displacement using cosine functions. Correction factors for the natural period and shear wave velocity have been used to consider the non-linearity of dynamic soil properties. However, the correction factors have been issued because the correction factors have not been sufficiently studied to consider Korea's regional conditions. This paper aims to evaluate the natural periods for the seismic deformation method considering Korea's ground conditions. Ground response analysis was performed using seven real earthquake records on twelve sites with different soil conditions where actual multi-utility tunnels are installed. As a result, natural periods of the sites were analyzed and new correction factors were proposed according to seismic performance and Korea's regional conditions.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.165-171
• /
• 2009

We developed a 'multi-point vibration acceleration method' for accurately predicting the cavitation intensity in pumps. Pressure wave generated by cavitation bubble collapse propagates and causes pump vibration. We measured vibration accelerations at several points on a casing, suction and discharge pipes of centrifugal and mixed-flow pumps. The measured vibration accelerations scattered because the pressure wave damped differently between the bubble collapse location and each sensor. In a conventional method, experimental constants are proposed without evaluating pressure propagation paths, then, the scattered vibration accelerations cause the inaccurate cavitation intensity. In our method, we formulated damping rate, transmittance of the pressure wave, and energy conversion from the pressure wave to the vibration along assumed pressure propagation paths. In the formulation, we theoretically defined a 'pressure propagation coefficient,' which is a correlation coefficient between the vibration acceleration and the bubble collapse pressure. With the pressure propagation coefficient, we can predict the cavitation intensity without experimental constants as proposed in a conventional method. The prediction accuracy of cavitation intensity is improved based on a statistical analysis of the multi-point vibration accelerations. The predicted cavitation intensity was verified with the plastic deformation rate of an aluminum sheet in the cavitation erosion area of the impeller blade. The cavitation intensities were proportional to the measured plastic deformation rates for three kinds of pumps. This suggests that our method is effective for estimating the cavitation intensity in pumps. We can make a cavitation intensity map by conducting this method and varying the flow rate and the net positive suction head (NPSH). The map is useful for avoiding the operating conditions having high risk of cavitation erosion.

• 한국광학회지
• /
• 제16권6호
• /
• pp.521-526
• /
• 2005

우리는 국내에서 처음으로 직경 300 mm인 광집속장치를 정렬 및 조립하였다. 이 장치는 주경, 부경 그리고 5개의 연결 거울로 구성된다. 이중에서 가장 중요한 부품인 주경은 각 구조물들과의 조립때마다 발생할 수 있는 변형을 정밀 측정하였다. 또한 사용되는 거울의 개수가 많기 때문에 광학정렬에는 체계적인 정렬 알고리즘을 도입하였다. 최종 조립결과 파면수차는 1.9 wave rms(wave =633 nm)로 예상치의 7배정도 큰 값이었다. 이것의 주원인은 조립 과정에서 발생한 연결 거울들의 변형인 것으로 확인되었다. 본 광집속장치를 정렬하면서 발생했던 문제점들에 대한 고찰은 향후 대형광학계를 만들 때 유용하게 사용될 수 있다.

• 한국지반공학회논문집
• /
• 제35권7호
• /
• pp.41-50
• /
• 2019

국내 고준위폐기물처분장 공학적방벽(EBS)의 일부가 되는 완충재로 경주 벤토나이트가 우선적으로 고려되고 있다. 압축벤토나이트는 지하수침투로 인한 팽윤압과 처분용기에서 발산되는 열응력을 경험한다. 따라서 EBS의 성능평가를 위해서 역학적 물성의 산정이 중요하다. 본 논문은 탄성파를 이용하여 경주 압축벤토나이트의 변형특성 측정을 목표로 하였다. 두 개의 $1.59g/cm^3$와 $1.75g/cm^3$의 건조밀도를 가지는 압축벤토나이트 시편을 제작하였고, 자유단-자유단 공진주시험을 수행하여 구속압축파속도와 비구속압축파속도를 측정하였다. 측정된 압축파속도를 이용하여 미소변형에서의 탄성계수($E_{max}$), 구속탄성계수($M_{max}$), 감쇠비($D_{min}$), 포아송비를 측정하였다. 그 결과로 경주 압축벤토나이트의 변형특성을 산정 제시하여 선행연구 결과들과 비교 분석하였다.

• 한국해양공학회지
• /
• 제31권1호
• /
• pp.36-46
• /
• 2017

Most of the studies on the hydraulic characteristics of wave-current interaction have used 2-D hydraulic experiments or 2-D numerical simulations. However, it is difficult to understand the wave-current interaction found in actual estuaries using these. Therefore, a numerical water tank was constructed in this study to perform simulations involving a 3-D river mouth. The result showed a change in the water surface at the river mouth from the wave-current interaction. With an increase in the ratio ($V_c/C_i$) between the river current and wave celerity, the wave height and mean water level of the river increased at the wave and current meeting point. A higher $V_c/C_i$ caused a stronger wave-current interaction and increased the turbulence kinetic energy. Thus, the wave height attenuation became larger by the wave-current interaction with a higher $V_c/C_i$. In addition, it was possible to understand the flow characteristics in the vicinity of the river mouth as a result of the wave-current interaction using the mean flow and mean time-averaged velocity at the mid-cross section of river.

• 한국해안해양공학회지
• /
• 제8권1호
• /
• pp.87-94
• /
• 1996

연안역에 있어서 파랑변형의 예측은 해안ㆍ항만구조물의 설계, 연안표사현상의 해명, 해안보존계획에 필수적인 항목이다. 실제의 파랑은 불규칙성이 그 본질이며 불규칙파랑으로써 해석이 필요하다. 파랑변형의 해명이 가장 뒤떨어진 것이 쇄파의 현상이며 특히, 해안지형이 복잡하게 변화하고 있는 경우의 쇄파변형예측모델의 구축이 제시되어 왔다. 지금까지 몇가지의 모델이 발표되었지만 쇄파의 메카니즘을 충분히 고려하지 않았거나 설계수법이 번잡하여 실용적이지 못한 난점이 있었다. 본 연구에서 제안하는 신쇄파변형모델은 각종의 단면지형에 있어서 파고ㆍ수위를 정확하게 예측하고 있어 범용성이 높은 모델임이 판명되었다.

• 한국연안방재학회지
• /
• 제1권1호
• /
• pp.1-9
• /
• 2014

In order to examine the characteristics of tsunami run-up heights on impermeable/permeable slope, a numerical wave tank by upgrading LES-WASS-3D was used in this study. Then, the model were compared with existing hydraulic model test for its verification. The numerical results well reproduced experimental results of solitary wave deformation, propagation and run-up height under various conditions. Also, the numerical simulation with a slope boundary condition has been carried out to understand solitary wave run-up on impermeable/permeable slope. It is shown that the run-up heights on permeable slope is 52.64-63.2% smaller than those on the impermeable slope because of wave energy dissipation inside the porous media. In addition, it is revealed that the numerical results with slope boundary condition agreed well with experimental results in comparison with the results by using stair type boundary condition.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.392-399
• /
• 2005

Shear modulus (or rigidity) of dam material is an important parameter which can be directly associated with the deformation of dam. Seepage or leakage of water can cause the defects or cracks of dam body. The existence of cracks and rigidity of dam body are decisive information for the estimation of dam safety. Rigidity of material is mainly determined from S-wave velocity and the defects of dam body can be detected by seismic reflection survey. Therefore, seismic reflection survey will be a desirable method which can give a solution about dam safety problem. Among various physical properties of dam body, S-wave velocity is the most important information but it is not easy to get the information. In this study, diverse measuring techniques of S-wave reflection survey were attempted to get the information about S-wave velocity of dam body. Ultimately, S-wave velocity could be estimated by the analysis of SH reflection events which can be easily observed in shot gather data obtained from SH measuring technique. Meanwhile, P-wave reflection survey was also performed at the same profile. P-beam radiation technique which can reduce the surface waves and reinforce the P-wave reflection events was applied for giving a help to analyse P-wave velocity. In the end, P-and S-wave velocity, Vs/Vp, Poisson's ratio distribution of the vertical section under the profile could be acquired.