• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2394-2402
• /
• 2017

The frequency selective fading by multipaths determines a performance of underwater acoustic communication system in shallow littoral ocean. In this study, a characteristics of underwater acoustic channel and performance of multi-carrier system is evaluated in littoral ocean with a 50m deep water, an effective wave height of 0.5m and sandy mud bottom near Busan city. A multipath delay spread and time and frequency domain are presented as a function of a transmitter-to-receiver range. A bit-error-rate of a 5 channel 4FSK(Frequency Shift Keying) with a transmission rate of 1kbps, is examined and RS(Reed-Solomon) code is also adopted to remove a burst error due to time domain fading. A number of multipath are less than four and a bit-error-rate is decreased as an increase of a transmitter-to-receiver range which gives a congestion of multi-paths resulting in a decrease of time and frequency domain fading. The measured bit-error-rate is about 10-4 at greater than 600m of transmitter-to-receiver range.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.162-175
• /
• 2018

The purpose of this study was to analyze the surface temperature of surface fabrics using UAV TIR images, to mitigate problems in the thermal environment of urban areas. Surface temperature values derived from UAV images were compared with those measured in-situ during the similar period as when the images were taken. The difference in the in-situ measured and UAV image derived surface temperatures is the highest for gray colored concrete roof fabrics, at $17^{\circ}C$, and urethane fabrics show the lowest difference, at $0.3^{\circ}C$. The experiment power of the scatter plot of in-situ measured and UAV image derived surface temperatures was 63.75%, indicating that the correlation between the two is high. The surface fabrics with high temperature are metal roofs($48.9^{\circ}C$), urethane($43.4^{\circ}C$), and gray colored concrete roofs($42.9^{\circ}C$), and those with low temperature are barren land($30.2^{\circ}C$), area with trees and lawns($30.2^{\circ}C$), and white colored concrete roofs($34.9^{\circ}C$). These results show that accurate analysis of the thermal characteristics of surface fabrics is possible using UAV images. In future, it will be necessary to increase the usability of UAV images via comparison with in-situ data and linkage to satellite imagery.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.2 s.48
• /
• pp.51-62
• /
• 2006

In the companion paper (I-Problem Statements of the Current Seismic Design Code), the current Korean seismic design code is required to be modified considering site characteristics in Korea for the reliable estimation of site amplification. In this paper, three site classification methods based on the mean shear wave velocity of the top 30m $V_{S30}$, fundamental site periods $(T_G)$ and bedrock depth were investigated and compared with each other to determine the best classification system. Not enough of a difference in the standard deviation of site coefficients $(F_a\;and\;F_v)$ to determine the best system, and neither is the difference between the average spectral accelerations and the design response spectrum of each system. However, the amplification range of RRS values based on $T_G$ were definitely concentrated on a narrow band than other classification system. It means that sites which have a similar behavior during earthquake will be classified as the same site category at the site classification system based on $T_G$. The regression curves between site coefficients and $T_G$ described the effect of soil non linearity well as the rock shaking intensity increases than the current method based on $V_{S30}$. Furthermore, it is unambiguous to determine sue category based on $T_G$ when the site investigation is performed to shallower depth less than 30m, whereas the current $V_{S30}$ is usually calculated fallaciously by extrapolating the $V_s$ of bedrock to 30m. From the results of this study, new site classification system based on $T_G$ was recommended for legions of shallow bedrock depth in Korea.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.205-215
• /
• 2013

In digital imaging system, Bayer pattern is widely used and the observed image is degraded by optical blur during image acquisition process. Generally, demosaicing and deblurring process are separately performed in order to convert a blurred Bayer image to a high resolution color image. However, the demosaicing process often generates visible artifacts such as zipper effect and Moire artifacts when performing interpolation across edge direction in Bayer pattern image. These artifacts are emphasized by the deblurring process. In order to solve this problem, this paper proposes a deblurring algorithm combined with edge directional color demosaicing method. The proposed method is consisted of interpolation step and region classification step. Interpolation and deblurring are simultaneously performed according to horizontal and vertical directions, respectively during the interpolation step. In the region classification step, characteristics of local regions are determined at each pixel position and the directionally obtained values are region adaptively fused. Also, the proposed method uses blur model based on wave optics and deblurring filter is calculated by using estimated characteristics of local regions. The simulation results show that the proposed deblurring algorithm prevents the boosting of artifacts and outperforms conventional approaches in both objective and subjective terms.

• Journal of the Korean earth science society
• /
• v.22 no.2
• /
• pp.120-129
• /
• 2001

A sand shoal (1300 m long and 400 m wide) with an orientation of north-south is formed on the lower tidal flat of Gomso Bay, southwestern coast of Korea. Surface bedforms, sedimentary structures, sedimentation rate, grain size distribution and can-corer sediments have been measured and analysed along the sand shoal proper zone B and its offshore zone A and onshore zone C during the period of 14 months. These three zones can be differentiated based on sedimentological characteristics: A zone - fine sand (3${\varphi}$ mean), linguoid-type ripples, 70 mm/month in sedimentation rate and no bioturbation, B zone - medium sand (2.5${\varphi}$ mean), dunes (4${\sim}$5 m in wavelength), 30 mm/month in sedimentation rate and no bioturbation, and C zone - coarse silt (5${\varphi}$ mean), sinuous-type ripples, 10 mm/month in sedimentation rate and well-developed bioturbation. These characteristics indicate that the zone C represents a relatively low-energy regime environment whereas the zone A corresponds to a relatively high-energy environment. The zone B would play an important role for a barrier to dissipate the approaching wave energy, resulting in maintaining of low-energy conditions in the inner part of Gomso-Bay intertidal flat behind.

• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.351-356
• /
• 2012

Ultrasonic cavitation is a physical phenomenon that generates and collapses microbubbles in media (mainly fluids) under conditions of strong ultrasonic irradiation. In this study, changes in the ultrasonic acoustic characteristics of bubble clouds in relation to ultrasonic irradiation were observed by the quantitative evaluation of cavitation yields. Concave-type single ultrasonic transducers with center frequencies of 500 kHz and 1.1 MHz were used to produce cavitation, and 2.25 MHz interference ultrasonic waves that would traverse any bubble clouds generated were used to analyze the cavitation. The parameters used for the evaluation of cavitation yields (changes in the center frequency, attenuation characteristics, and the propagation time of penetrating waves) were analyzed in relation to the cavitation-generating conditions (irradiation intensity, excitation signal, and center frequency). On the basis of these results, correlations between the changes in the center frequency and irradiation intensity were identified. Although the correlation coefficient was low, notable changes were observed in the center frequency under certain irradiation conditions. Attenuation trends in the interference ultrasonic waves showed high correlations with all the irradiation conditions, and it was noted that these trends were not affected by the forms of cavitation generated. No differences in the propagation time were observed among different irradiation conditions. These findings suggest that bubble yields can be quantitatively evaluated effectively by evaluating the diverse irradiation conditions and that such a quantitative evaluation could be used to study the basic cavitation phenomenon occurring in high-intensity ultrasonic wave treatment.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.687-692
• /
• 2010

This paper surveys emission characteristics of Far-infrared of the fabrics fabricated with germanium imbedded sheath-core conjugate composite filaments. For this purpose, master batch chip was prepared with PET semi-dull chip and nano sized germanium particles and sheath-core type conjugate composite filament was spun using this master batch chip and polyester semi dull. The emission power and emissivity of the germanium imbedded fabrics were measured and investigated using FT-IR spectrophotometer by KICM- FIR 1005 measurement method. In addition, the fabric mechanical properties were measured and discussed with the effects of the optimum texturing process conditions and fabric structural design conditions. The sheath/core type PET composite germanium imbedded filaments were manufactured by the optimum spinning condition, its tenacity and breaking strain showed the same level as the regular PET filament. The tenacity and breaking strain of the DTY showed good physical properties and no problem in the weaving process. Then, wet and dry shrinkages showed higher values than those of regular PET filament. The emission power of the germanium imbedded fabric was $3.53{\times}10^2W/m^2$ at the $5-20{\mu}m$ wave length range, and emissivity was 0.874. The fabric hand of germanium imbedded fabrics was inhanced by the optimum texturing process and fabric structural design with improved mechanical properties such as fabric bending and compressional properties.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.311-318
• /
• 2004

It is very important for the safe navigation and fishing operation to ensure the hull response of a fishing vessel in rough seas. This is an experimental study on the dynamical characteristics of ship's motion during operating job and sailing in the real sea. The experiments were carried out on the small stern trawler in operating job and sailing, and then the ship's roll and pitch motion were simultaneously recorded by P/C according to the wave directions. From these data, the statistical properties and power spectra were obtained and the analysis of ship's motions in the both case were made. The results obtained are summarized follows : (1) The amplitudes of pitch motion don't appear a big different between trawl job and sailing, but at bow seas, its in sailing have a tendency to increase more than in trawl job. The amplitudes of roll motion appear a bog different between trawl job and sailing, but at beam sea, that slightly decreasing tendency. (2) The peak period of pitch motion in trawl job and sailing change, but that of roll motion don't change according to the direction of waves. (3) The warp tention cause the motion of hull to be reduce, if the tention of each side have a ballance.

• Journal of the Korean Geographical Society
• /
• v.49 no.6
• /
• pp.812-832
• /
• 2014

We analyzed physical and chemical properties of sediments from 20 subtidal points and 9 beach points to define sedimentary environment between summer and winter of Shindu Marine Protected Area. Means of particle size in summer were generally finer than winter's. There was distinctively spatial pattern that particle sizes became increasingly fine as west direction and apart from beach in summer, but this pattern was not shown in winter. Coarse sediments were prevailed in winter. To explain these patterns, we propose possible two causes which are spatially different water depth condition related with seasonal wave climate or fine sediment input from an estuary located in south of this area during summer rainy season. Contents of exchangeable cations of sediment in summer were shown $Na^+$>$Ca^{2+}$>$Mg^{2+}$>$K^+$ in order, but those of winter were shown $Na^+$>$Mg^{2+}{\fallingdotseq}Ca^{2+}$>$K^+$. Contents of $Na^+$, $Mg^{2+}$, and $K^+$ were related with contents of fine sediment and showed high correlation in each other. These relations were not shown between $Ca^{2+}$ and others. Our results show that there are spatio-temporal unique sedimentary environments between subtidal zone, beach, and dune near Shindu Marine Protected Area. Therefore, we should consider these spatio-temporal patterns for environmentally sound management of Shindu coastal system.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.1
• /
• pp.63-73
• /
• 2016

It is widely acknowledged that the human auditory system is organized tonotopically and people generally listen to sounds as a function of frequency distribution through the auditory system. However, it is still unclear how acoustic features of speech sounds are indicated to the human brain in terms of speech perception. Thus, the purpose of this study is to investigate whether two sounds with similar high-frequency characteristics in the acoustic analysis show similar results at the level of auditory brainstem. Thirty three young adults with normal hearing participated in the study. As stimuli, two Korean monosyllables (i.e., /ja/ and /cha/) and four frequencies of toneburst (i.e., 500, 1000, 2000, and 4000 Hz) were used to elicit the auditory brainstem response (ABR). Measures of monosyllable and toneburst were highly replicable and the wave V of waveform was detectable in all subjects. In the results of Pearson correlation analysis, the /ja/ syllable had a high correlation with 4000 Hz of toneburst which means that its acoustic characteristics (i.e., 3671~5384 Hz) showed the same results in the brainstem. However, the /cha/ syllable had a high correlation with 1000 and 2000 Hz of toneburst although it has acoustical distribution of 3362~5412 Hz. We concluded that there was disagreement between acoustic features and physiology outcomes at the auditory brainstem level. This finding suggests that an acoustical-perceptual mapping study is needed to scrutinize human speech perception.