• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.6
• /
• pp.17-23
• /
• 1980

The transmission and reception characteristics of surface acoustic wave devices are analyzed by introducing three different types of transducers. such as single-electrode transducer. double-electrode transducer and triple-electrode transducer. Utilizing an electromagletic field theory technique, the output signal has been derived theoretically. The basic analysis used here can be extended for other configurations. The surface acoustic devices have been shown promising as a means of improving the operation efficiency by modifying the Beometric configuration of transducer strips.

• Journal of Information Technology Services
• /
• v.19 no.3
• /
• pp.89-100
• /
• 2020

The wireless power transmission market is growing at an average annual rate of 51.5% from $ 16.4 billion in 2015 to $ 131.1 billion in 2020. However, there are limitations to commercialization due to the development of standards and technologies. Thus, this study identified trends in standards and regulations by market and by country. The research collected and filtered a total of 69,488 worldwide wireless power transfer patents by June 2019 and extracted a total of 28,555 patents. Based on this, technology development status was analyzed and predicted. In this study, long-distance and short-range technology development with high technology development difficulty and low technology development ratio could lead to growth of the entire wireless charging market. It is analyzed that investment and policy preparation are necessary to secure source technology for long-distance / near technology development than China, Japan and Europe.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.65-73
• /
• 1995

In this paper, new algorithm which calculates transmission coefficient of electromagnetic wave by numerical analysis of scattered field by conductors with arbitrary cross-sections in parallel-plate waveguide is proposed. Proposed algorithm assumes magnetic current distribution on the boundary of scattering conductors, and applies Image theorem to perfect conductor surfaces of parallel-plate waveguide. Integral equations for fictitious magnetic currents on conducting boundary are set up. Magnetic current distributions on conducting boundary are expanded as exponential basis function, and using Galerkin method matrix equations are set wp. To compute matrix elements this method utilizes Fourier transform which is faster than numerical integration. Finally, frequency and incidence-angle characteristic of transmission coefficient are calculated and compared with experimental results.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.251-252
• /
• 2015

The designed hybrid generation system (HGS) not only consider the voltage condition of grid connection point but also do reactive power support according to the transmission system operator's directions. The PCS operation plan in HGS should be supported by precise transferred quantity expectation about reactive power because the system has large physical areas and also be interconnected with grid through long transmission system. Therefore, the realistic measuring process about transferred reactive power quantity by utilizing HGS is required to consider additional compensation plan. In this paper, an reactive power transferred capability of HGS with expected parameter is analyzed, and imposed to the simulation process that is performed on EMTDC environment. Basically, grid information and system characteristics were utilized with Jeju island in Korea, and the performance analysis is carried out based on the composed layout in ongoing project.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.108-113
• /
• 2014

This paper presents the influence on the transmission characteristics of swelling in rectangular waveguides for Q-band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a swelling is calculated by using internal impedance in order to investigate the influence of swelling in the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1069-1074
• /
• 2021

Recently, mobile communication technology has new eras with supply of 5G commercial communication. 5G mobile communication service is currently supplied with city area, services will be quickly expanded to entire area of country. This mmWave based 5G mobile communication is under spreading for human communication with voice and Internet service. After completion of construction of this human communication, this technology will be expanded to industrial communications. Railway communication system is an example of this industrial communications. In this, performance of traffic transmission for railway communication network based on this 5G railway communication networks will be analyzed with computer simulations. Construction requirements of 5G railway communication networks will be suggested with this analysis results.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.187-197
• /
• 2009

The bubbles are created by waves, raindrops, water collision, vessels sailing at sea, life activities of various marine organisms in the ocean and other sources. The bubbles affect the intensity and sound speed of acoustic waves in the ocean. We indirectly observed bubbles in order to understand the creation of and the effects of bubbles on sound waves, using an Acoustic Bubble Spectrometer (ABS) and CTD, from 04:00 to 17:00, 19 September, 2007. We also analyzed the correlation of wind speed and the generation of bubbles, the amount of bubbles, and the sound speed variation at 50, 60, and 70 kHz. Finally, We simulated the way how bubbles affect sound transmission based on the analysis results.

• Current Optics and Photonics
• /
• v.8 no.4
• /
• pp.345-354
• /
• 2024

The bit walk-off effect caused by fiber dispersion and carrier reuse in the base station (BS) are two key problems in radio-over-fiber (ROF) systems. In this paper, a novel frequency-octupling ROF system based on the Mach-Zehnder modulator (MZM) is proposed, which can overcome the bit walk-off effect and realize carrier reuse by inserting pilot signals. Theoretical analysis and simulation verification of the system are carried out. Under the condition of a Q factor greater than 6, the optical fiber transmission distance of the upper and lower links is more than 290 km and 80 km, respectively. The influence of the main device parameters of the system on the Q factor is analyzed when they deviate from their designed values. The system designed in this paper can not only effectively overcome the bit walk-off effect, but also solve the problem of downlink performance degradation and the limitation of tunability caused by conventional carrier reuse in ROF. The system can greatly increase the transmission distance and improve the performance of the system and has an important application prospect in ROF.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2016

Vehicular communications is system which can be applied for transmission of various safety messages or Intelligent Transportation Systems(ITS) applications by combining vehicle/road technology with Information and Communication Technology(ICT). In recent years, a variety of ITS services are available such as driving information, road conditions, V2X messages as well as navigation and traffic jams notification. In general, vehicular communications can be used for vehicle-to-vehicle and vehicle-to-infrastructure communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environments. In this paper, WAVE communication standard based on the IEEE802.11p is explained and signal characteristics in WAVE communication is introduced. Also, The H/W and S/W characteristics in Road Side Station and On Board Equipment for the Vehicle to Everything communication are analyzed. Received Signal Strength which is power of receiving signal of communication equipment is measured in test road to estimate the real WAVE communication's performance. It is shown that the implemented WAVE communication technology is satisfactory to provide ITS services.

• Structural Monitoring and Maintenance
• /
• v.2 no.3
• /
• pp.213-236
• /
• 2015

The paper presents an investigation into the mode conversion and scattering characteristics of guided waves at delaminations in laminated composite beams. A three-dimensional (3D) finite element (FE) model, which is experimentally verified using data measured by 3D scanning laser vibrometer, is used in the investigation. The study consists of two parts. The first part investigates the excitability of the fundamental anti-symmetric mode ($A_0$) of guided wave in laminated composite beams. It is found that there are some unique phenomena, which do not exist for guided waves in plate structures, make the analysis become more complicated. The phenomena are observed in numerical study using 3D FE simulations. In the second part, several delaminated composite beams are studied numerically to investigate the mode conversion and scattering characteristics of the $A_0$ guided wave at delaminations. Different sizes, locations and through-thickness locations of the delaminations are investigated in detail. The mode conversion and scattering phenomena of guided waves at the delaminations are studied by calculating reflection and transmission coefficients. The results show that the sizes, locations and through-thickness locations of the delaminations have significant effects on the scattering characteristics of guided waves at the delaminations. The results of this research would provide better understanding of guided waves propagation and scattering at the delaminations in the laminated composite beams, and improve the performance of guided wave damage detection methods.