• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.283-296
• /
• 2020

A numerical model is established to investigate the run-up of a solitary wave after propagating over a triangular saw-tooth-shaped submerged breakwater. A rectangular-shaped submerged breakwater is simulated for comparison. Several factors, including the submerged depth, the lagoon length and the beach slope, are selected as independent variables. The free surface motions and velocity fields of the solitary wave interacting with the submerged breakwater are discussed. The results show that the submerged depth and lagoon length play significant roles in reducing the run-up. The influence of the beach slope is not significant. At the same submerged depth, the triangular saw-tooth-shaped submerged breakwater has only a slightly better effect than the rectangular-shaped submerged breakwater on the run-up reduction. However, a calmer reflected wave profile could be obtained with the rougher surface of the saw-tooth-shaped submerged breakwater. The study conclusions are expected to be useful for the conceptual design of saw-tooth-shaped submerged breakwaters.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.62-67
• /
• 2013

In this paper, the wave run.up on a vertical cylinder is presented. Various cross sections of a cylinder were simulated using the panel method for various wave periods. Two.dimensional model tests were performed in a wave flume. The simulation results are compared with the test results. The simulation is based on the linear diffraction theory.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.6-11
• /
• 2014

This paper presents the results of an experimental study of wave run-ups on a semi-submersible offshore structure. A series of model tests with a 1:80 scale ratio were carried out in the two-dimensional wave basin of MOERI/KIOST. The experimental model had two columns and one pontoon. The model was fixed and wave elevations were measured at five points per column. Two different draft (operational & survival) conditions and three wave heights were considered under regular wave conditions. First, the nonlinear characteristics of wave run-ups are discussed by using the time series data. Then, the wave heights are compared with numerical results based on the potential flow model. The comparison shows fairly good correlation between the experiments and computations. Finally, wave run-ups under the operational and survival conditions are suggested.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.2
• /
• pp.147-153
• /
• 2006

In this study, the run-up of water waves on slopes of s-berm breakwaters was investigated by performing a series of hydraulic experiments. The run-up height was analyzed in detail by using the effects of wave steepness and surf similarity parameter. In general, the run-up heights were decreased as the height and the width of berm were increased. However, the variation of run-up height was small for change of wave steepness and surf similarity parameter.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.3
• /
• pp.178-187
• /
• 2005

A reliability analysis model f3r studying the influence of joint distribution of wave heights and periods on wave un-up is presented in this paper. From the definition of failure mode related to wave run-up, a reliability function may be formulated which can be considered uncertainties of water level. In particular, the reliability analysis model can be directly taken into account statistical properties and distributions of wave periods by considering wave period in the reliability function to be a random variable. Also, variations of wave height distribution conditioned to mean wave periods can be taken into account correctly. By comparison of results of additional reliability analysis using extreme distributions with those resulted from joint distribution of wave height and periods, it is found that probabilities of failure evaluated by the latter is larger than those by the former. Although the freeboard of sloped-breakwater structures can be determined by extreme distribution based on the long-term measurements, it may be necessary to investigate additionally into wave run-up by using the present reliability analysis model formulated to consider joint distribution of a single storm event. In addition, it may be found that the effect of spectral bandwidth parameter on reliability index may be little, but the effect of wave height distribution conditioned to mean wave periods is straightforward. Therefore, it may be confirmed that effects of wave periods on the probability of failure of wave run-up may be taken into account through the conditional distribution of wave heights. Finally, the probabilities of failure with respect to freeboard of sloped-breakwater structures can be estimated by which the rational determination of crest level of sloped-breakwater structures may be possible.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.947-954
• /
• 2005

In this study, laboratory measurements are presented for run-up heights and overtopping of water waves on slopes of rubble-mound breakwaters armored with tetrapods. The effects of wave steepness, surf similarity and wave period on the run-up height and overtopping are investigated in detail. A measurements. A very reasonable agreement is observed. A slopes of breakwaters become milder, run-up heights become smaller. The overtopping rate also is considerably rate also is considerably affected by wave steepness and period.

• Structural Monitoring and Maintenance
• /
• v.2 no.1
• /
• pp.49-64
• /
• 2015

This paper presents a method for assessing the risk of wave run-up and overtopping of existing coastal defences and for analysing the probability of failure of the structures under future hydraulic conditions. The recent UK climate projections are employed in the investigations of the influence of changing environments on the long-term performance of sea defences. In order to reduce the risk of wave run-up and overtopping caused by rising sea level and to maintain the present-day allowances for wave run-up height and overtopping discharge, the future necessary increase in crest level of existing structures is investigated. Various critical failure mechanisms are considered for reliability analysis, i.e., erosion of crest by wave overtopping, failure of seaside revetment, and internal erosions within earth sea dykes. The time-dependent reliability of sea dykes is analysed to give probability of failure with time. The results for an example earth dyke section show that the necessary increase in crest level is approximately double of sea level rise to maintain the current allowances. The probability of failure for various failure modes of the earth dyke has a significant increase with time under future hydraulic conditions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.355-362
• /
• 2008

A reliability model of Level II AFDA is proposed to analyze the wave run-up occurring by the interaction of incident waves and sloped coastal structures. The reliability model may be satisfactorily calibrated by Level III Monte-Carlo simulation. Additionally, the partial safety factors of random variables related to wave run-up can be straightforwardly evaluated by the inverse-reliability method that use influence coefficients and uncertainties of random variables, and target probability of failure. In particular, a design equation for wave run-up is derived in the same form as that of deterministic design method so that the reliability-based design method of Level I may be applied easily. Finally, it is confirmed that results redesigned by the reliability-based design method of Level I with partial safety factors suggested in this paper are satisfactorily compared with results of CEM(2006) as well as those of Level II AFDA.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.90-95
• /
• 2004

During the past 50 years methods for predicting wave overtopping of coastal structures have coastal structures have continuously been developed Wave overtopping is one of the most important processes for the design of seawalls. The term 'wave overtopping' is used here to refer to the processes where waves hit a sloping structure run up the slope and, if the crest level of the slope is lower than the highest run up level, overtop the structure. Wave overtopping is dependent on the processes associated with breaking wave. The Numerical model is based on Navier-Stokes equation and Marker-Density Function of method for nonlinear free-surface flow by Miyata & Park(1995). The influence of how the slopes of seawalls, wave type and crest freeboard affect overtopping discharges has been investigated. The research of study using the new development nonlinear free-surface flow numerical model SOLA-VOF are presented.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.1
• /
• pp.44-51
• /
• 1996

The accurate calculation of run-up heights of long waves along the coastline is important in the view of engineering. In this paper the run-up heights of long waves are estimated by using the cnoidal wave theory which also covers both sinusoidal and solitary waves. However, the generation and the calculation of run-up heights of cnoidal waves are difficult both in laboratory and numerical experiments. In this study, the maximum run-up heights of cnoidal waves on steep slopes are computed by using the boundary integral equation model. It has been shown that the run-up heights of cnoidal waves are less than those of solitary waves, while they are larger than those of sinusoidal waves having the same wavelengths and heights. The variation of run-up heights of cnoidal waves is not a monotonic function of the wavelength. However, the run-up heights of cnoidal waves asymptotically approach that of a solitary wave as the wavelength approaches infinity. The calculated run-up heights agreed reasonably with experimental data.