• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.742-748
• /
• 1993

The dynamics and control of two complex column configurations (sidestream column with stripper; prcfractionater/sidestream column configuration), which are multivariable interacting and nonlinear, have been studied. A new control scheme developed by Hanand Park(1993) to deal with the nonlinear and multivariable nature of distillation processes has been applied to these complex distillation configurations. The control scheme incorporates a nonlinear wave model into a generic model control framework. An observer based on the nonlinear wave model is used to determine the profile positions of distillation column sections. The control scheme enables tight control of the profile position of each column section that leads to fast stabilization of product compositions.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.373-376
• /
• 2006

In general, a method for generating irregular wave by combination of component waves obtained from linear wave theory is widely used. In these method, however, mean water surface elevation is rising from time to time because of nonlinear effect of wave. In this study, for the rising problem of mean water surface elevation and stabilization of calculation from time to time, mass transport velocity for horizontal velocity at wave source position is considered. The rising problem of mean water surface elevation is checked by comparing calculated wave profile from numerical technique proposed in this study with target wave profile at wave source position in numerical wave tank by using CADMAS-SURF code. And, by generating irregular wave, the validity of wave overtopping rate estimated from this numerical analysis is discussed by comparing computed results with measured results in hydraulic model experiments for vertical seawall located on a sloping sea bottom. As a results, the computations are validated against the previously experimental results by hydraulic model test and numerical results of this study and a good agreement is observed. Therefore, numerical technique of this study is a powerful tool for estimating wave overtopping rate over the crest of coastal structure.

• Atmosphere
• /
• v.20 no.4
• /
• pp.505-518
• /
• 2010

We investigated the impacts of the diabatic heating location, vertical profile and basic state on the Rossby wave propagation. To examine the dynamical process of individual responses on the regional heat source, a dry version of the linear baroclinic model was used with climatological summertime (JJA) mean basic state and vertical structure of the diabatic heating for 1979-2008. Two sets of diabatic heating were constructed of those positioned in the mid-latitudes (Tibetan Plateau, eastern Mediterranean Sea, and the west-central Asia) and the tropics (the southern India, Bay of Bengal, and western Pacific). It was found that using the principal component analysis, atmospheric response to diabatic heating reaches to the steady state in 19th days in time. The prescribed mid-latitude forcing forms equivalent barotropic Rossby wave propagation along the westerly Asia jets, whereas the tropical forcing generates the Rossby wave train extending from the tropics to mid-latitudes. In relation to the maximum vertical profile, the mid-level forcing reveals a stronger response than the lower-level forcing, which may be caused by more effective Rossby wave response by the upper-level divergent flow. Under the different sub-seasonal mean state, both of the tropical and mid-latitude forcing induce the different sub-seasonal response intensity, due to the different basic-state wind.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.151-156
• /
• 2021

Leakage and Bragg condition of optical waveguide with asymmetric rectangular grating profile are evaluated in detail by using novel and rigorous modal transmission-line theory (MTLT) based on eigenvalue problem. The optical waveguide composed by asymmetric rectangular grating occur leaky-wave stop-bands at Bragg conditions, and anomalies based on Rayleigh-Wood condition near Bragg conditions. Furthermore, DFB properties of the guiding structure at Bragg conditions are analyzed by applying longitudinal equivalent transmission-line with characteristic impedance of periodic grating. The numerical results show that filtering characteristics that maximize the reflected power of DFB waveguide are activated near Bragg conditions, in which leaky-wave stop-bands occur.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.4
• /
• pp.223-231
• /
• 2013

This paper presents a time-domain Gauss-Newton full-waveform inversion method for the material profile reconstruction in heterogeneous semi-infinite solid media. To implement the inverse problem in a finite computational domain, perfectly-matchedlayers( PMLs) are introduced as wave-absorbing boundaries within which the domain's wave velocity profile is to be reconstructed. The inverse problem is formulated in a partial-differential-equations(PDE)-constrained optimization framework, where a least-squares misfit between measured and calculated surface responses is minimized under the constraint of PML-endowed wave equations. A Gauss-Newton-Krylov optimization algorithm is utilized to iteratively update the unknown wave velocity profile with the aid of a specialized regularization scheme. Through a series of one-dimensional examples, the solution of the Gauss-Newton inversion was close enough to the target profile, and showed superior convergence behavior with reduced wall-clock time of implementation compared to a conventional inversion using Fletcher-Reeves optimization algorithm.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.4
• /
• pp.27-36
• /
• 2012

The simulation of the field dynamic soil properties for soil modeling in the centrifuge test is important. In this study, the process of soil modeling based on the shear wave velocity profile is developed. From the resonant column test in each confining pressure, the shear wave velocity profile is expected and the modeling condition is determined by comparing it with that in the field. During the dynamic centrifuge test, the bender element test is performed for measuring the in-flight shear wave velocity profile, and the applicability of the proposed method was verified. This modeling method is applied to the centrifuge test of the Hualien Large-Scale Seismic test.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.474-480
• /
• 2022

Optical phase conjugation is one of techniques capable of compensating for distortion due to chromatic dispersion and nonlinearity, which are essential for long-distance transmission of wavelength division multiplexed (WDM) signal. We proposed and analyzed a way to solve the limitations of this technology through dispersion map with periodic dispersion profile. In the proposed system, optical phase conjugator (OPC) is placed at the position of 1:2 or 2:1 of the entire link, and the dispersion profile of dispersion map has periodic shape in the form of a sine wave or an inverse-sine wave. It was confirmed that the effective compensation of the distorted 960 Gb/s WDM signal was further improved through the proposed periodic dispersion map when the OPC was located at the 1:2 point instead of the 2:1 point of the entire link. In addition, it was found that the maximum RDPS allocated to fiber span should be 1,800 ps/nm or more in order to increase the design flexibility of dispersion-managed link with the proposed periodic dispersion map.

• Honam Mathematical Journal
• /
• v.39 no.4
• /
• pp.649-654
• /
• 2017

In this note, we seek traveling wave solutions of a shallow water model in a one dimensional space by a simple but rigorous calculation. From the profile equation of traveling wave solutions, we need to investigate the phase portrait of a one dimensional ordinary differential equation $\tilde{u}^{\prime}=F(\tilde{u})$ connecting two end states of the traveling wave solution.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1998.09a
• /
• pp.5-11
• /
• 1998

Wave nonlinearity and dispersivity have mutually counteracting effects on the wave evolution process; i.e., the former makes the wave profile steeper, while the latter milder. Therefore to describe evolution of nonlinear water waves under general condition such as nonlinear random waves over arbitrary depths, both the wave nonlinearity and dispersivity must be properly taken into account in the wave modeling. (omitted)

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.147-154
• /
• 1999

A Numerical model is developed in order to predict cross-shore beach profile change. In this model it is assumed that sediment transport is generated by waves(bed load transport suspended load transport) and undertow which is defined as offshore directional steady flow in the surf zone. In addition wave tank experiments which reproduce storm-surge were performed. By comparing resulting profile of calculation with experiments, the applicability of this method is verified.