본 논문에서는 유한한 도체 두께를 갖는 결합선로를 이용하여 1/4파장 역방향 방향성 결합기를 설계하였다. 방향성 결합기를 구성하는 유한 도체 두께를 갖는 결합선로를 해석하기 위한 방법으로 간단하고 빠른 수치해석 방법인 모드정합법을 사용하였다. 본 논문의 해석 결과는 도체 두께를 고려한 역방향 방향성 결합기의 설계가, 도체 두께를 고려하지 않고 설계한 경우 기존에 알려졌던 단점들인 약한 결합특성, 낮은 지향성, 그리고 비현실적인 결합선로의 폭을 극복할 수 있음을 보여준다. 또한, 수치해석 결과로부터 l/4파장 역방향 방향성 결합기에서는 도체 두께의 고려로 강한 결합특성을 만드는 것이 가능하지만, 결합길이가 약간 길어진다는 사실을 확인하였다. 본 논문에서 해석한 유한한 도체 두께는 역방향 방향성 결합기의 새로운 설계 변수로서 사용이 가능하며, 아울러 다양한 마이크로파 집적회로의 설계에도 응용이 가능함을 보여준다.
본 논문에서는 모드정합법을 이용하여 도체두께를 고려한 비대칭 결합선로의 특성을 해석하고, 중심주파수 5㎓ 인 정방향 -3㏈ 방향성 결합기를 설계 및 제작하였다. 결합선로의 결합도에 대한 연구는 대부분 기하학적인 구조의 변화에 대해 연구되어 왔으나, 본 논문에서는 도체두께가 비대칭 결합선로의 간격, 선로 폭, 결합기의 길이에 미치는 영향을 이론적으로 분석하고, 도체두께를 고려한 비대칭 결합선로를 이용한 결합기를 설계하여 도체 두께가 두꺼울수록 강한 결합으로 인하여 정방향 결합기의 결합길이가 짧아지고 광대역 특성이 얻어지는 결과를 얻었다. 본 논문에서는 5㎓ 중심주파수로 한 도체두께가 서로 다른 비대칭 결합선로로 구성된 정방향 -3㏈ 결합기를 설계하고, 제작 및 실험을 통하여 약 -4.05㏈∼-4.09㏈의 결합특성을 갖는 주파수특성 측정결과를 얻어 설계 값에 거의 근접하는 것을 확인하였으며, 도체 두께를 고려한 정확한 설계로써 결합선로에서 강한결합과 광대역 특성을 만들 수 있다는 사실을 확인하였다.
In this paper, a new type microstrip directional coupler has been designed and a 3dB coupler has been fabricated and measured. The measured and analysed results are agree well each other except difference of 1 dB insertion loss. There are two eigenmodes, e.g. even and odd mode in coupled microstrip lines. By using the difference between these two eigenmodes phase constants, the directional coupler can be designed by adjusting coupling length, which has a desired coupler has a disdvantage that its coupling length is longer than conventional oe, but it may be used as a useful coupler in millimeter wave range. And it has the merit of less discontinuity effects, becuase it is simpler than the other couplers in structure.
A guided - wave electro - optical modulatored directional coupler $2{\times}2$ was fabricated on X-cut $LiNbO_3$ by proton exchange wi th self-aligned method. The Electode pattern was formed by the four extra gap electrode separtion within self-aligned electrode mask. Initial cross over state turned that by controlling the anneal ing process and self-aligned electrodes are used in fabricating the electro-optical modulatored directional coupler $2{\times}2$. The modulatored directional coupler $2{\times}2$ has very good figures of merits: the measured crosstalk was -28.2 dB and the modulating valtage of 3.2[V].
KIEE International Transactions on Electrophysics and Applications
/
제4C권6호
/
pp.276-281
/
2004
In this paper, the optimal design of a novel microstrip directional coupler with a grooved housing for high directivity characteristic is presented. It will be shown that the high directivity of the microstrip coupler can be achieved simply by attaching an optimized housing structure. over the microstrip, which is much easier to fabricate than other conventional types. The dimensions of the proposed structure are maximized by using (1+1) evolution strategy (ES) combined with the deterministic algorithm. To improve the effectiveness of the results, efficient optimization procedures suitable for the model are proposed. From these results, it is determined that the proposed structure indicates an improved directivity. The optimized results are verified by full wave analysis at the center frequency of 850MHz.
We propose a nearly lossless, compact, electrically modulated vertical directional coupler, which is based on the controllable evanescent coupling in a previously proposed graphene-assisted total internal reflection (GA-FTIR) scheme. In the proposed device, two single-mode waveguides are separate by graphene-$SiO_2$-graphene layers. By changing the chemical potential of the graphene layers with a gate voltage, the coupling strength between the waveguides, and hence the coupling length of the directional coupler, is controlled. Therefore, for a properly chosen, fixed device length, when an input wave is launched into one of the waveguides, the ratio of their output powers can be controlled electrically. The operation of the proposed device is analyzed, with the dispersion relations calculated using a model of a one-dimensional slab waveguide. The supermodes in the coupled waveguide are calculated using the finite-element method to estimate the coupling length, realistic devices are designed, and their performance was confirmed using the finite-difference time-domain method. The designed $3{\mu}m$ by $1{\mu}m$ device achieves an insertion loss of less than 0.11 dB, and a 24-dB extinction ratio between bar and cross states. The proposed low-loss device could enable integrated modulation of a strong optical signal, without thermal buildup.
A guide-wave electro-optical modulatored direct-ional coupler 1X2 was fabricated on LiNbO$_3$ by proton exchange with self-aligned method After proton exchange process, the waveguide is formed by annealing process, The relationship between refractive index change of waveguide and maximun output was studied a long the annealing time. A self-alinged method was used to simplify the fabrication process of the waveguide and the maximize the efficiency of electric field. The modulatored directional coupler 1${\times}$2 has very good figures of merits; The measured crosstalk was -29.5[dB] and the modulating voltage of 8.0[V].
본 연구에서는 60 GHz 대역의 무선 LAN(Wireless Local Area Network) 시스템에서 Balanced 구조를 갖는 증폭기나 믹서에 응용이 가능한 CPW(Coplanar Waveguide)구조의 Tandem 형 3-dB 방향성 결합기를 설계하고 제작하였다. 이는 기존의 edge-coupled 선로를 이용한 3 dB 결합기가 가지는 제작의 어려움과 방향성의 문제를 개선하기 위해 단일 결합선로를 다단으로 평행하게 연결한 구조이다. 우리는 소자의 크기와 제작의 용이함을 고려해, 결합계수가 -8.34 dB를 갖는 단일 결합선로를 2단으로 평행하게 연결한 구조를 채택하였다. 그리고 기존의 Tandem 결합기 제작에서 사용되어왔던 다층 기판 구조나 본딩 구조가 아닌 에어브리지 구조를 이용하여 단일 평면으로 쉽게 구현할 수 있도록 하였고, V-band(50 $\~$75 GHz)내에서 동작할 수 있도록 기생성분을 줄이고 소자 특성을 유지시켰다. 측정결과 V-band에서 완만한 3.5 $\~$4 dB의 결합도와 87.5$^{\circ}{\pm}1^{\circ}$ 의 위상차를, 60 GHz 에서는 30 dB 이상의 방향성을 확인하였다.
This paper presents a full-wave, moment method analysis of a Moreno directional coupler with tow crossed-slots between two crossed rectangular waveguides. the overall structure is divided into several rectangular waveguides and cavities by the use of the equivalence principle to the complex slot regions. this enables a simple and efficient analysis involving the well-known retangular waveguide/cavity Green's functions. For a numerically efficient simulation, the roof-top basis expansion and line testing is used and an acceleration technique is applied to the series summation in the Green's functions. The numerical results are compared with the measurements to verify the correctness of the present analysis.
본 연구는 국내 최초로 개발된 직접 비교법을 이용한 W-band 밀리미터파 전력 표준 전달 시스템에 대한 것이다. 이 시스템은 75~110 GHz 대역에서 W-band 도파관형 전력감지기의 실효 효율과 교정 인자를 측정하기 위하여 개발되었다. 전력 표준 전달 시스템 구성의 핵심 요소인 방향성 결합기의 반사 특성 평가 기법을 소개하고 실험 결과를 보인다. 구현된 시스템을 이용하여 측정하고자 하는 전력감지기의 교정 인자 측정 결과를 보이고, 불확도 요인에 대하여 고찰한다. 측정 결과를 기준값과 비교하여 W-band 밀리미터파 전력 표준 전달 시스템에 의한 측정의 유효성을 검증한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.