• 신재생에너지
• /
• 제9권4호
• /
• pp.25-31
• /
• 2013

This paper describes an electrical linear generator (IntELG) based on permanent magnets, containing heaving buoy, and its applications for the floating wave energy converters riding in parallel waves. The permanent magnets are integrated with the heaving buoy as a component and the integrated component is configured within the cylindrical IntELG to be filled with fluid. Thus, the IntELG can effectively be applied for the power-take-off of the floating wave energy converter riding in parallel waves. Typical applications are exampled with the Pelamis and Anaconda and they are investigated for the diversely redundant power source of nuclear power plant and the cooperation with submerged tunnel(s).

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.425-428
• /
• 2017

본 논문에서는 진동 에너지를 이용하여 에너지를 수확하는 전파 정류 하베스팅 회로를 설계하였다. 설계된 회로는 저전압에서도 전력효율이 우수하도록 Beta-Multiplier를 이용하여 Body-Bias technique을 Negative Voltage Converter에 적용하였으며, Comparator를 Bulk-Driven type으로 설계하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 설계된 회로의 칩 면적은 $931{\mu}m{\times}785{\mu}m$이다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.86-101
• /
• 2021

This study examined the effects of buoy shape and Nonlinear Froude-Krylov force (NFK) on a heaving-buoy-type Wave Energy Converter (WEC). Based on the Maclaurin expansion, the theoretical solutions of the NFK were derived for three different buoy shapes; hemispheric buoy, circular vertical cylinder, and truncated conical cylinder. A hydraulic power take-off system was adopted, and the latching control strategy was applied to maximize the extracted power from the WEC. The nonlinear effects of the Froude-Krylov force and restoring force on the heaving point absorber were investigated by comparing the heave Response Amplitude Operator (RAO) and time-averaged power extraction. The results showed that the conventional linear analyses were overestimated by up to 50% under the high amplitude wave condition. The latching control strategy was the most effective when peak wave period of regular or irregular wave was 0.4-0.45 times the heave natural period of the buoy.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권2호
• /
• pp.81-89
• /
• 2014

부유식 파력발전구조물의 운동은 발전성능과 구조물의 안정성에 중요한 영향을 미치며, 이에 구조물의 형상 최적화가 필요하다. 본 연구에서는 기존에 연구되고 있는 부유식 진자형 파력발전장치를 대상으로 운동 저감부 형상의 부가를 통해 운동응답특성을 최적화 하려 한다. 이를 위해 감쇠판을 설치하여 부가저항과 감쇠력을 변화시키고, 복원판을 설치하여 복원력을 증가시켜 구조물의 운동응답의 변화를 확인하였다. 실험을 통해 운동응답특성의 변화를 비교 검증하였으며, 수치해석을 통해 다양한 운동저감부 형상에 대해 분석하였다. 본 연구를 통해 부유식 파력발전구조물의 형상을 최적화하고 성능을 향상 시킬 수 있다.

• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.168-174
• /
• 2022

월파된 파도를 이용한 파력발전시스템을 월파수류형 파력발전기 OWEC(Overtopping Wave Energy Converter)라고 한다. OWEC의 성능은 발전 시스템은 특성상 파도의 파고와 주기의 영향을 받는다. 파도는 해양에 따라 파고, 주기, 파도 방향 등의 특성이 다르고 이러한 파도의 다양한 특성 때문에 OWEC는 안정적인 전력을 생산하기 어렵다. 따라서 각 바다의 특성에 따른 OWEC의 적절한 형상에 관한 연구가 필요하다. 본 연구에서는 SPH(Smoothed Particle Hydrodynamics) 입자법을 사용하여 OWEC의 램프 설계가 hydraulic efficiency에 미치는 영향을 확인했다. 총 10개의 모델을 설계하였으며, 선택된 매개변수에 따라 램프의 설계 파라미터를 선택하고 사면의 형상을 변경하여 시뮬레이션을 수행하였다. 해석 결과로부터 구한 유량을 기초로 hydraulic efficiency를 산출하였다. 계산된 hydraulic efficiency를 바탕으로 각 변수가 사면의 형상에 따른 월파 성능에 미치는 영향을 확인하였다. 본 연구에서는 특정 해역에 따른 OWEC 램프의 적절한 형상에 대한 방향을 제시하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권3호
• /
• pp.239-245
• /
• 2017

As a new technical approach, wave energy converter by using vertical motion of water in the multiple water chambers were developed to realize actual wave power generation as eco-environmental renewable energy. And practical use of wave energy converter was actually to require the following conditions: (1) setting up of the relevant device and its application to wave power generation in case that severe wave loading is avoided; (2) workability in installation and maintenance operations; (3) high energy conversion potential; and (4) low cost. In this system, neither the wall(s) of the chambers nor the energy conversion device(s) are exposed to the impulsive load due to water wave. Also since this system is profitable when set along the jetty or along a long floating body, installation and maintenance are done without difficulty and the cost is reduced. In this paper, we describe the system which consists of a float, a shaft connected with another shaft, a rack and pinion arrangement, a ratchet mechanism, and rotary type generator(s). Then, we present the dynamics model for evaluating the output electric power, and the results of numerical calculation including the effect of the phase shift of up/down motion of the water in the array of water chambers aligned along the direction of wave propagation.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.116-122
• /
• 2019

Among the various wave power systems, Salter's duck (rotor) is one of the most effective wave absorbers for extracting wave energy. The rotor shape is designed such that the front part faces the direction of the incident wave, which forces it to bob up and down due to wave-induced water particle motion, whereas the rear part, which is mostly circular in shape, reflects no waves. The asymmetric geometric shape of the duck makes it absorb energy efficiently. In the present study, the rotor was investigated using WAMIT (a program based on the linear potential flow theory in three-dimensional diffraction/radiation analyses) in the frequency domain and verified using OrcaFlex (design and analysis program of marine system) in the time domain. Then, an experimental investigation was conducted to assess the performance of the rotor motion based on the model scale in a two-dimensional (2D) wave tank. Initially, a free decay test (FDT) was carried out to obtain the viscous damping coefficient. The pitch response was extracted from the experimental time series in a periodic regular wave for two different wave heights (1 cm and 3 cm). In addition, the viscous damping coefficient was calculated from the FDT result and fluid forces, obtained from WAMIT, are incorporated into the final response of the rotor. Finally, a comparative study based on experimental and numerical results (WAMIT & OrcaFlex) was performed to confirm the performance reliability of the designed rotor.

• 한국전자파학회논문지
• /
• 제14권11호
• /
• pp.1198-1206
• /
• 2003

본 논문에서는 도파관 대 마이크로스트립 모드 변환기를 설계하고 이를 바탕으로 도파관 혼합기 모듈을 제작 측정하였다. 설계된 모드 변환기는 반사손실을 최소화하기 위하여 50 $\Omega$ 마이크로스트립 라인의 패턴을 변화시킴으로서 도파관 내 릿지와 마이크로스트립 사이의 불연속부분의 영향을 보상하였다. 이렇게 제작된 모드 변환기를 사용함으로써 밀리미터파 대역에서 개발된 MMIC 칩을 저 손실 guiding이 가능하도록 도파관 내에 장착시켜 시스템으로의 적용이 가능하도록 하였다. 제작된 도파관 혼합기 모듈의 측정 결과, 제공된 MMIC에서 얻어진 혼합기의 사양의 성능저하가 거의 없음을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.288-291
• /
• 2007

Since the residential load is an AC load and the output of solar cell is a DC power, the photovoltaic system needs the DC/AC converter to utilize solar cell. In case of driving to interact with utility line, in order to operate at unity power factor, converter must provide the sinusoidal wave current and voltage with same phase of utility line. Since output of solar cell is greatly fluctuated by insolation, it is necessary that the operation of solar cell output in the range of the vicinity of maximum power point. In this paper, DC/AC converter is three phase PWM converter with smoothing reactor. And then, feedforward control used to obtain a superior characteristic for current control and digital PLL circuit used to detect the phase of utility line.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.167.1-167.1
• /
• 2011

Sustainable energy generation is becoming extremely imperative due to the expected limitations in current energy resources and to reduce pollution. Especially, because of its considerable energy potential, ocean wave energy has been investigated with regard to power generation. To develop large high power wave generator system, it is important to make a small scale proto type and to test that. Thus the objective of this research is to examine the characteristics of a mechanically excited generator system having small power capacity experimentally. The water reservoir (4 m length, 1.5 m width and 1.8 m depth) having a wave maker to make arbitrary height and period of the water wave was made. The proto type consists of three main parts; a buoy, rack-pinion base one-way mechanism, and a wave generator(Fig.1). The water wave is going up and down and the hexahedron buoy is following the wave. The rack gear attached to the buoy is also going up and down to roll the pinion connected to an electric generator then it produces electricity. The experiments were performed with several conditions of water waves, and the power outputs over 30 W could be measured for some conditions. In future works, to achieve higher performance for the proto type, the effects of primary parameters (buoy shape and mass, etc.) on the system efficiency will be identified.