• Journal of Radiation Protection and Research
• /
• v.10 no.2
• /
• pp.113-121
• /
• 1985

For the safety assessment of radwaste treatment and disposal, the leaching characteristics of $Cs^+\;and\;Sr^{++}$ from the cement-solidified radwastes was investigated by means of the survey and analysis of the activity leach rate and cumulative leach fraction of $^{137}Cs\;and\;^{90}Sr$ leaching from solidified radwastes. The cylindrical cement-solidified samples were made by the sodium silicate method and neutralization method changing the mole density of simulated liquid radwaste, type of cement, adding material and concentration of boric acid. The leaching study was carried out by the method using simulated PWR concentrated liquid radwaste solidified in cement that had been processed following the recommendations of IAEA. All the experimental results are in well accordance with the research data reported previously, but the watertight cement-solidified radwastes show rather high leach rate of radioactivity. It is learned, therefore, that the watertight cement is not adequate as the material for the solidified radwastes.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.75-80
• /
• 2005

Because there are only a limited number of means of action that are available for the master to pursue in the event of flooding, onboard decision support system has been required The majority of systems activated during a flooding emergency (such as watertight and semi-watertight doors, bulkhead valves, dewatering pumps etc.) almost exclusively aim to restore a sufficiently high level of subdivision to prevent flooding from spreading through the ship. Even though assuming the flooding scenario is not catastrophic, the use of ballast tanks can be an additional and very effective tool to ensure both prevention of flooding spreading and also improve ship stability. This paper describes an optimization algorithm devised to choose the set of ballast tanks that should be filled in order to achieve an optimal response to a flooding accident.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.135-140
• /
• 2005

There are cofferdam and watertight wall to prevent of circulation or pollution during building of ocean structures like a dam and bridge in the harbors area and the sea. Inflow fluid and base of structure is important thing as one of the structural design factors for this interception wall like a cofferdam and watertight wall. In this study, it is revealed that at least 500 instantaneous velocity field data are required for ensemble average to get reliable turbulence statistics. The turbulent shear flow around a surface-mounted vertical wall was investigated by using the two-frame PIV(CACTUS 3.1) system and Mean velocity distributions have also been measured in the whole flow field.

• Korean Institute of Interior Design Journal
• /
• no.16
• /
• pp.59-67
• /
• 1998

This study classifies distinctive peculiarities of cruise interior design which is different from that of structures on the land through the theoretical study on the cruise equipped with functions of hotel and ship. The distinguishing marks are : The first one of the main peculiarities is associated with the International agreement and the safety of passangers and the ship required by the specific regulation. The cruise interior design should be also selectively chosen. The third in comply with the peculiarity of the space plan the base of planning the cruise spaces are as follows : The course of bow and stern the pillar the center line of ship main vertical bulkhead watertight subdivision bulkhead and the deck. The last by special peculiarity of construction materials, materials and products applied for the cruise should meet the regulation of SOLAS and IMCO.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.111-117
• /
• 2013

In this paper, we have proposed novel technique to improve maintainability for training vehicle of underwater weapon system. In case of under water weapon, the fire procedure is related with operation of expulsion system in submarines. So the submarine crews should practice the complex fire procedure of weapon system by using training vehicle, which is safer and cheaper than operational weapon. After emitted from submarine, the training vehicle rise to the surface and should be withdrawn from the sea. The recovered training vehicle is transported to maintenance depot and pass through the recycling procedure including disassembling the vehicle, data acquisition & analysis, battery charge, replacing expandable components, testing the captive equipment, and assembling the vehicle. The disassembling & assembling of training vehicle which is composed of watertight section or airframe, is time-consuming work. So in this paper, we have studied the elements of recycling procedure and propose the method to exclude the assembling & disassembling work for maintainability improvement.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.4
• /
• pp.53-58
• /
• 2003

Design of the corrugated watertight bulkhead for a bulk carrier is principally determined by the permissible limit of Classification requirements. As the weight of upper and lower stool has considerable portion of the total weight of the transverse bulkhead, optimum design including the stool geometry and size will play an important role on economic shipbuilding. The purpose of this study is focused on the minimization of steel weight using the design variables, which are the shape and the size of the corrugation as well as the upper and lower stools. Discrete variables are used as design variables for the practical design. In this study, the evolution strategies (ES), which can highly improve the possibility of leaching the global minimum point, are selected as an optimization method. Usefulness of this study is verified by comparison with the proven type ship design. As objective function, total weight of the transverse bulkhead including the upper and lower stools is used.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.156-159
• /
• 2001

Recently, side scan sonar system has been developed and operated to survey cable laying, sunken bodies, geometry of sea bottom and so on. It uses the acoustic signals, which are emitted from two transducer arrays, left and right sides, to get geometric information of the specified area. This system consists of transceiver board, towed body, deck unit and GPS receiver. The transceiver board, nested in a watertight canister, controls the transmitting and receiving of the acoustic pulses from transducer arrays. After receiving the scattered signals, it processes BP(Band Pass) filtering, AGC(Automatic Gain Control), TVG(Time Varying Gain) and Heterodyne. The deck init has the signal processing part, A/D converter, power supplier, and real-time monitoring part. The towed body has been designed to satisfy the optimal hydrodynamic behavior during towing, In this paper, brief introductions on the design theory of transceiving part and some results from the field which have been operated recently will be introduced.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.152-155
• /
• 2004

Recently constructions of large scale infrastructures have been tending upwards, due to continuous growth of economy and increase of demands. In addition, hydration heat occurs rapidly in early age just after casting of concrete owing to higher strength and massive structure of concrete. Consequently, cracks and residual stress are developed in accordance to field condition. Moreover, These have harmful influences on safety, durability, watertight, waterproof, and shape of concrete structure. In this study, hydration heat tests were conducted on three of self-compacting concrete and one of high strength concrete. Heat generation and temperature are compared and evaluated based on the test results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.03a
• /
• pp.49-58
• /
• 1993

Reappraisal of the design and the construction concept of the bottom drainage tunnel has been made through the seepage analysis. An appropriate design approach for this tunnel has also been proposed. It was revealed from this study that water pressures acting on the concrete lining in the bottom dralnage tunnel much depend on the permeability of the surrounding ground, the source of water supply and the discharge capacity of dralnage facilities. The full release of these water pressures by the current drainage system could not be expected if this type of tunnel is constructed in the ground including alluvial deposits having a high permeability. The necessity of a proper reinforcement of the concrete lining or a modification of its shapes corresponding to the water pressure has been suggested.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.3
• /
• pp.17-28
• /
• 1999

Concerns related to the safety of bulk carriers we, most of all, the increasing number of bulk carrier accidents which amount to 425 during last 20 years; half of them are totally lost. A number of bulk tarriers are still missing. Bulk carrier safety has become an international issue since 1995. The International Maritime Organization (IMO) embarked on the legislation as a countermeasure to the increasing number of the bulk carrier accidents. The IMO discussed in the safety of bulk carriers including the strength of transverse watertight bulkheads, especially when the ship carries high density cargoes and the damage stability of bulk carriers in the flooded condition. In this study, statistics and causes of accidents of bulk carriers are analyzed in order to identify special features of bulk carrier accident and causes of the casualty. This study examines certain cases of hull collapses and severence which resulted in sinking to infer possible causes of missing ships.