• 복식
• /
• 제57권8호
• /
• pp.14-23
• /
• 2007

The purpose of this study was to investigate the present condition of cold protective clothing for mailman, to improve its design in movement, fitness, and other functions, and supply basic data for its performance evaluation. The results are as follows : The 46.60% of those questioned did not satisfy current clod protective clothing fer mailman. Especially, they considered dissatisfactory in properties such as waterproof, comfort, activity, and sweat absorption. The newly developed cold protective clothing is two-piece style composed of jacket and pants. Both jacket and pants are composed of inner and outer clothing individually. In both jacket and pants, their outer clothing's material was waterproof, windproof, and breathable shell fabric on which PTFE film laminated and their inner clothing's material was 100% polyester Polar polis to have better insulation property. The jacket has attachable cap which can be used as rain gear and set-in sleeve with stand collar. It also had big outside patch pockets and side seam pockets to ensure enough storage space. The pants have knee pads to give free movement to knees and slant side pockets. Inner clothing of both jacket and pants can be worn during working inside without out clothing. Insulation of the newly developed cold protective clothing was not better than current one except right hand, left hand and left foo. It is considered that is because thickness of material is the most important factor to influence insulation.

• 공업화학
• /
• 제30권1호
• /
• pp.39-42
• /
• 2019

본 연구에서는 PET 상용 소재를 기반으로 제작된 유수분리막을 오일 폐수 처리에 효과적으로 적용하기 위하여 유수분리장치 성능 향상 및 적절한 소재 선정에 대하여 검토하였다. PET 섬유 소재의 방수 능력과 선택성을 유지할 수 있는 최적 조건을 탐색하였으며, 밀도 $60g/m^2$ 이상의 PET 소재를 2겹 이상으로 사용하여야 분리 효율을 유지하면서 본 연구에서 설계한 단위 셀에 적합한 수준의 방수 능력을 보여주었다. 유수분리장치는 회전하는 타공 원통 구조로 설계되고, 외부에 유수분리막이 감싸는 구조로 장착되어 연속적인 흡착제거가 가능하며, 내부에 부유형 방해판을 설치하여 오일 성분을 강제적으로 유수분리막 방향으로 유도하여 제거 효율과 안정성을 극대화하였다.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.495-501
• /
• 2013

In the present study, a BLDC motor for a pump in which a neodymium PM is replaced with a Ferrite PM has been developed in preparation for the cost increase and to ensure the stability of the resource supply. One of the currently used motors for pumps is a BLDC motor having an interior PM wherein a rare-earth PM is adopted. However, a BLDC motor for a pump is designed to have large airgap because of the use of a waterproof insulator according to its structural characteristics, and therefore, a SPM structure is suitable. Hence, an SPM BLDC motor in which a Ferrite PM is used is designed. Nevertheless, the use of Ferrite instead of rare-earth materials causes a deterioration in the performance of the electric motor, such as a decrease in the BEMF and the maximum power of the motor and the irreversible demagnetization of the PM. In order to mitigate such disadvantages, an optimized design of the BLDC motor is developed by changing each design parameter and by improving the electromagnetism structure.

• 복식
• /
• 제61권6호
• /
• pp.1-14
• /
• 2011

With the trend of wearing mountaineering wear as casual apparel as well as a continuous increase of mountaineers, mountaineering wear market has rapidly grown. New techniques to improve mountaineering apparel have been developed. Construction Without Sewing(CWS) is one of them. It is a sewing technique to improve performance and functions of new functional mountaineering apparel. CWS employs a welding machine with an adhesive tape and press instead of sewing so that it makes the apparel lighter and have better wearability, durability, and windproof and waterproof function, than sewed apparel. This study focuses on the concept, nature, and applications of the mountaineering wear manufactured by CWS. It also made an analysis of manufacturing process, and proposed three designs for the mountaineering wear created by CWS. With introducing the merits of CWS, the costumers will be have better understanding of CWS and break their stereotype that functional clothing is simply expensive without considering its benefits.

• 센서학회지
• /
• 제22권2호
• /
• pp.100-104
• /
• 2013

A superhydrophobic mesh is a unique structure that blocks water, while allowing gases, sound waves, and energy to pass through the holes in the mesh. This mesh is used in various devices, such as gas- and energy-permeable waterproof membranes for underwater sensors and electronic devices. However, it is difficult to fabricate micro- and nano-structures on three-dimensional surfaces, such as the cylindrical surface of a wire mesh. In this research, we successfully produced a superhydrophobic water-repellent mesh with a high contact angle (> $150^{\circ}$) for nanofibrous structures. Conducting polymer (CP) composite nanofibers were evenly coated on a stainless steel mesh surface, to create a superhydrophobic mesh with a pore size of $100{\mu}m$. The nanofiber structure could be controlled by the deposition time. As the deposition time increased, a high-density, hierarchical nanofiber structure was deposited on the mesh. The mesh surface was then coated with Teflon, to reduce the surface energy. The fabricated mesh had a static water contact angle of $163^{\circ}$, and a water-pressure resistance of 1.92 kPa.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.281-282
• /
• 2018

Recently, apartment houses are becoming more and more sophisticated and attention has been focused on the design of the interior of the bathrooms. As bathrooms always use water, the importance of waterproofing is very high. However, there continues to use the method that was used 30 years ago. And no one was trying to improve. It is necessary to be converted to a dry method, because waterproofing methods and materials have developed. Therefore, this study proposes the required performance before applying the dry waterproofing material to bathroom.

• 복식
• /
• 제61권4호
• /
• pp.152-168
• /
• 2011

The purpose of this study is to develop a design prototype of outdoor-wear which is suitable for trekking. For achieving this purpose, 6 factors(bodice, sleeve, hood, pockets, opening, hem-line) considered for clothing function were selected, classified, and complemented based on the survey of literature and the research of 185 designs in 12 outdoor-wear brands. The results are as follows; The removable hood and 4DM sleeve style with the elastic band and velcro for the cuffs was the most preferred in the detail design on the brand research. And also the ventilation function and 1 or 2 diagonal in-seam pocket, covered zipper was preferred. Based on this result, two design prototypes of men's outdoor-wear for trekking were suggested; jacket 1 has a slim waist line and a hip length. Front opening has a zip and placket for windproof effect. There is a detachable hood with stopper around the head line. 4DM sleeve and elastic band inserted at the end of sleeve, so that prevent the hem-line raising. Two inseam pocket is placed slightly diagonal. Jacket 2 is a hood jacket with a york. The Jacket has a little roomier in waist and a hip length. Front opening is fastened by a waterproof zip. It has a 4DM sleeve and a princess line to make it placed two pocket which have ventilation functionality.

• Journal of Computational Design and Engineering
• /
• 제3권3호
• /
• pp.179-190
• /
• 2016

A kind of modified epoxy resin sheet molding compounds of the impeller has been designed. Through the test, the non-metal impeller has a better environmental aging performance, but must do the waterproof processing design. In order to improve the stability of the impeller vibration design, the influence of uncertainty factors is considered, and a multi-objective robust optimization method is proposed to reduce the weight of the impeller. Firstly, based on the fluid-structure interaction, the analysis model of the impeller vibration is constructed. Secondly, the optimal approximate model of the impeller is constructed by using the Latin hypercube and radial basis function, and the fitting and optimization accuracy of the approximate model is improved by increasing the sample points. Finally, the micro multi-objective genetic algorithm is applied to the robust optimization of approximate model, and the Monte Carlo simulation and Sobol sampling techniques are used for reliability analysis. By comparing the results of the deterministic, different sigma levels and different materials, the multi-objective optimization of the SMC molding impeller can meet the requirements of engineering stability and lightweight. And the effectiveness of the proposed multi-objective robust optimization method is verified by the error analysis. After the SMC molding and the robust optimization of the impeller, the optimized rate reached 42.5%, which greatly improved the economic benefit, and greatly reduce the vibration of the ventilation system.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1227-1240
• /
• 2009

This study examines the actual conditions of toddler playwear preference survey for design and function. The study develops proper indoor and outdoor playwear for toddlers based on the analysis. A survey of 200 parents with toddlers between 2 and 6 years old and 120 teachers was conducted to find the conditions and needs for playwear along with the necessary design elements. Second, 6 designs including 3 designs for indoor playwear and 3 designs for outdoor playwear were made. These designs emphasized on soil contamination part, color, pattern, form, material, detail, and fasteners. Art play and cooking play are considered for indoor playwear and ways to decrease contamination on sleeve hem, elbow, chest, and knee were determined through the use of yellow, green, and blue colors. Applying a character and separate top with sleeves were determined. Light with breathable and waterproof fabric was determined. The correct amount of Velcro fasteners or buttons was determined for front fastening in addition a pocket was considered necessary as a detail part. The common design for both boys and girls along with a proper design for diverse play were determined. For outdoor playwear, water play, sand play, movement play, and ecology experience are considered and ways to decease contamination on hip, sleeve hem, and knee should be applied to the design as determined through the use of yellow, green, blue, and red colors. The demands for pattern, form, material, and details were similar to indoor playwear. Zipper and buttons for front fastening were determined. These final 6 playwear designs are presented using CAD WALK DESIGNWARE.

• 한국통신학회논문지
• /
• 제34권6A호
• /
• pp.437-444
• /
• 2009

최근 해양개발 및 재난 재해 방지 시스템에 대한 관심이 높아지면서 수중 센서네트워크 관련 연구가 시작되고 있으며, 다수의 노드 간 효율적인 통신을 위해 고속, 저가의 수중 통신 모뎀의 필요성이 증대되고 있다. 본 논문에서는 저가의 초음파 센서를 이용하여 수중 통신 모뎀을 설계 및 구현하였고 실내와 실외 환경에서 구현한 모뎀의 성능을 검증하였다. 실험 결과에 의하면, 개발한 모뎀은 실내의 수조에서 1.5kbps, 연못에서 2kbps로 통신이 가능하였으며 모뎀 간의 최대 통신 거리는 30m이었다. 또한, 수중 센서네트워크의 기능 구현을 고려하여 싱크노드용 모뎀과 센서노드용 모뎀들 간의 일대다 통신 실험을 수행하였다.