• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.93-103
• /
• 1997

The purpose of this study was to investigate the actual performance of Korean firefighter's clothing through comparisons with protective clothing used in the United State, surveys of firefighter's opinion, and experiments on the material used in Korean firefighter's clothing. The paper presents experimental results as well as ways to improve current standards. The major results are as follows: 1. Korean protective clothing is too thin and too heavy. Thicker, lighter, and more heat- resistant fabric and a lighter trim should be used. 2. Korean protective clothing is not very water-resistant. A Water-resistant outershell and an innerliner which are made of air permeable and water resistant fabric must be used. 3. Korean protective clothing's outershell and innerliner should be made of fabric that is more heat-resistant, flame-resistant, and chemical resistant. 4. Protective clothing should be more brightly colored and its reflective tape should have greater reflectivity to make firefighters more visible. 5. The fastner currently used in Korean protective clothing consists of Velcro, a button, and a D-ring which can not be opened and closed quickly. A better fastener would have just velcro and a zipper. 6. The uniform for Korean firefighters consists of only a protective coat and boots. Protective trousers should be added to the standard uniform. Also, a thermal harrier should be used in winter to protect firefighters from the cold. 7. Korean firefighters should be provided with their own personal sets of protective clothing to ensure a proper fit.

• The Plant Pathology Journal
• /
• v.20 no.2
• /
• pp.131-134
• /
• 2004

A strain of Cucumber mosaic virus (CMV) was isolated from a weed, water chickweed (Stellaria aquatica), growing in the pepper field in Chunchon, Korea. This isolate, CMV-Sa, was differentiated from other CMVs based on biological properties and nucleotide sequence analysis of the coat protein (CP) gene. CMV-Sa showed different reactions to all the tested plants, except Capsicum annuum and Cucumis sativus, when compar-ed with those of CMV-Mf (subgroup I) and CMV-PaFM (subgroup II). Remarkably, in Nicotiana tabacum cvs. Samsun, Xanthi-nc and Ky-57, CMV-Sa induced local necrotic ring spots on the inoculated leaves and venal wave pattern and mosaic on the upper leaves. RNA analysis, serology, and RT-PCR of CP gene showed that CMV-Sa belonged to subgroup I of CMV. However, restriction enzyme analysis of the cDNA using AluI, HhaI, HincII, HindIII, HinfI and MspI showed that CMV-Sa was distinct from that of CMV-Mf. Based on comparison of the nucleotide of CP gene and deduced amino acid sequences between other CMV strains, CMV-Sa was closely related to CMV-Mf with 93.7% and 97.2 % identity, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.573-576
• /
• 2009

The reaction of $(en)Pd(NO_3)_2$ (en = ethylenediamine) with 1,4-bis(dimethyl-4-pyridylsilyl)benzene (L) affords cyclodimer, $[(en)Pd(L)]_2(NO_3)_4$, whereas the reaction of $(tmeda)Pd(NO_3)_2$ (tmeda = N,N,N’,N’-tetramethylethylenediamine) with L gives cyclotrimer, $[(tmeda)Pd(L)]_3(NO_3)_6$. Both complexes exist as catenane in water. The catenated cyclodimer is rigid whereas the catenated cyclotrimer is dynamic in water. The catenated cyclotrimers afford hydrogel containing 98.5% water below 2 ${^{\circ}C}$. The hydrogel changes to its sol around 38 ${^{\circ}C}$, and to its clear solution at 78 ${^{\circ}C}$. Such a notable difference between $[(en)Pd(L)]_2(NO_3)_4$ and $[(tmeda)Pd(L)]_3(NO_3)_6$ might be explained by their different dynamic behavior via ring size effects.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.389-393
• /
• 2013

A rhodamine B-based fluorescent probe for nitrite ion ($NO{_2}^-$) has been designed, synthesized, characterized and its properties for recognition of $NO{_2}^-$ were studied. Nearly non fluorescent probe upon reaction with nitrite ion significantly triggered the fluorescence. Fluorescence response is based on ring opening of the spirolactam of rhodamine B phenyl hydrazide showing maximum absorbance at 552 nm and maximum emission at 584 nm. Probe 3 exhibited high sensitivity and extreme selectivity for nitrite ion over other common ions and oxidants ($Cl^-$, $ClO^-$, $ClO{_2}^-$, $ClO{_3}^-$, $ClO{_4}^-$, $SO{_4}^{2-}$, $SiO{_3}^{2-}$, $NO{_3}^{2-}$, $CO{_3}^{2-}$) examined in methanol water (1:1, v/v) at pH 7.0. The probe might be a new efficient tool for detection of nitrite ion in natural water and biological system.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.267-270
• /
• 2005

Finite element model of pressurized water reactor internals were obtained using ANSYS software package to analyze dynamic characteristics. The pressure vessel, hold-down ring, alinement key, core support barrel(CSB), upper guide structure(UGS) and fluid gap were fully modeled using structural solid element(SOLID45) and fluid element(FLUID80) which is one of element types. Also modal analysis using the above finite element model has been performed. As a result, it was found that the fundamental beam mode natural frequency of the CSB were 8.2 Hz, the shell mode one 14.5 Hz. To verify the Finite Element Analysis(FEA), we compare the analysis result with experimental data that is obtained from the plant IVMS(internal Vibration Monitoring System). The experimental results are good agreement with the FEA model.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1052-1065
• /
• 2024

Advanced Pressurized Water Reactors (APWRs) and Boiling Water Reactors (BWRs) employ a suppression pool as a heat sink to prevent containment overpressure. Steam can be discharged into the pool through multi-hole spargers or blowdown pipes in both normal and accident conditions. Direct Contact Condensation (DCC) creates sources of momentum and heat. The competition between these two sources determines the development of thermal stratification or mixing of the pool. Thermal stratification is of safety concern as it reduces the cooling capability compared to a completely mixed pool condition. In this work we develop a scaling approach to prediction of the thermal stratification in a water pool induced by steam injection through spargers. Experimental data obtained from large-scale pool tests conducted in the PPOOLEX and PANDA facilities, as well as simulation results obtained using validated codes are used to develop the scaling. Two injection orientations, namely radial injection through multi-hole Sparger Head (SH) and vertical injection through Load Reduction Ring (LRR), are considered. We show that the erosion rate of the cold layer can be estimated using the Richardson number. In this work, scaling laws are proposed to estimate both the (i) transient erosion velocity and (ii) the stable position of the thermocline. These scaling laws are then implemented into a 1D model to simulate the thermal behavior of the pool during steam injection through the sparger.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.3
• /
• pp.149-156
• /
• 2022

In order to study the open-water test and analysis techniques for pumpjet propulsors in the Large Cavitation Tunnel (LCT), at the Korea Research Institute of Ships and Ocean Engineering, a set of test equipment was designed and manufactured. The pumpjet propulsor is composed of rotor, stator and duct resulting in the strong interaction between the components. A ring-shaped sensor was developed to measure the thrust and torque for duct and stator. The test equipment including the pumpjet is installed on an existing POW dynamometer in the reverse direction. The results from the reverse POW test setup were validated against those from the conventional POW test setup in the Towing Tank (TT) as well as in the LCT. The pumpjet open-water test was conducted at the Reynolds number of around 1.0×106, at which the obtained experimental data became stable in the Reynolds number effect test. The open-water test for the rotor (rotor-only) was conducted to study whether the duct and stator should be considered as a part of the hull or the propulsor. On the basis of the test results, it was shown that the duct and stator could be included in the propulsor. The total thrust, combined thrust of rotor, duct, and stator was used for the pumpjet open-water test analysis. As the whole pumpjet is defined as a propulsor, it is thought that the self-propulsion test and analysis could be conducted in the same way as that of the conventional propeller.

• Computers and Concrete
• /
• v.21 no.2
• /
• pp.199-207
• /
• 2018

With the development of concrete technology, producing concrete products that have the ability to flow under their own weights and do not need internal or external vibrations is an important achievement. In this study, assessments are made on using travertine, marble and limestone rock flours in self-compacting lightweight concrete (SCLC). In fact, the effects of these powders on plastic and hardened phases of SCLC are studied. To address this issue, concrete mixtures with water to cementitious materials ratios of 0.42 and 0.45 were used. These mixtures were made with 0 and 10% silica fume (SF) replacement levels by cement weight. To achieve lightweight concrete, lightweight expanded clay aggregate (Leca) with the bulk density of about $520kg/m^3 $was utilized. Also two kinds of water were consumed involving tap water and magnetic water (MW) for investigating the possible interaction of MW and rock flour type. In this study, 12 mixtures were studied, and their specific weights were in the range of $1660-1692kg/m^3$. To study the mixtures in plastic phase, tests such as slump flow, J-ring, V-funnel and U-box were performed. By using marble and travertine powders instead of limestone flour, the plastic viscosities and rheology were not changed considerably and they remained in the range of regulations. Moreover, SCLC showed better compressive strength with travertine, and then with marble rock flours compared to limestone powders. According to the results of the conducted study, MW showed better performance in both fresh and hardened phases in all the mixes, and there was no interaction between MW and rock flour type.

• Membrane and Water Treatment
• /
• v.2 no.1
• /
• pp.25-37
• /
• 2011

PES UF membranes containing silver were prepared to impart antibacterial properties for waste water treatment. Asymmetric membranes for antibacterial application were prepared from polyethersulfone (PES) and silver nitrate ($AgNO_3$) (PES/$AgNO_3$=15/2 by weight) solution in N-Methyl-2-pyrrolidone (NMP) via simple wet phase inversion technique. These membranes were characterized by polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG) of different molecular weights (1000 ppm in water) at room temperature and on operating pressure of 5 bars. It was observed that the water flux of PES-$AgNO_3$ membrane is slightly lower than virgin PES but still increased linearly with the increment of pressure applied. The morphology of the resulting membranes was examined using Field-Emission Scanning Electron Microscope (FESEM) coupled with Energy Dispersive Spectroscopy (EDS). Elemental analysis using EDS proved that silver is successfully loaded on the membrane surfaces. Due to the success of loading silver on membrane surfaces, antibacterial activities were evaluated via agar diffusion method against Escherichia coli (E.coli) and Staphylococcus aureus (S.aureus) culture. By incorporating 2 wt% of silver nitrate, PES-$AgNO_3$ showed significant inhibition ring on both E.coli and S.aureus. Filtration of E.coli solution (OD 0.31) showed satisfactory rejection data with ~100% inhibition growth after 24 hours incubation at $37^{\circ}C$. Resultant membranes also exhibit better tensile strength (compared to virgin PES) up to 71% may be due to the suggested interactions. The residual silver during fabrication was measured using ICP-MS and result showed that the residual silver content of PES-$AgNO_3$ membrane was only ~1% of the original silver added in the polymer solution. These studies have shown that PES-$AgNO_3$ UF membranes are potential in improving the filtration in water treatment.