• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.112-117
• /
• 2012

In order to improve or replace the direct addition method of nitrite and ascorbic acid, the effect of nitrite and ascorbic acid-derived gas addition on color development and physical characteristics in emulsified sausage was investigated. Nitrite (150 ppm) and ascorbic acid (450 ppm) were added directly to emulsion in the control group, but in the treatment group nitrite and ascorbic acid-derived gas was used for emulsion. In the control and treatment groups, pH values were higher than raw meat, but these values did not show significant change during the storage in both groups. In the meat color, lightness (CIE $L^*$) and redness ($a^*$) values of control and treatment groups were higher compared to raw meat. The treatment group has lower redness and higher yellowness ($b^*$) values than control group during the storage (p<0.05). However, lightness was not significantly different between control and treatment groups. The cook and storage loss values were significantly different between control and treatment groups (p<0.05), but the water holding capacity and shear force values were not significantly different between groups. These results showed that treatment of nitrite and ascorbic acid-derived gas has a similar effect to direct addition of nitrite and ascorbic acid on color development and physical characteristics in emulsified sausage. Also, these results showed that nitrite and ascorbic acid-derived gas addition may be a good possible alternative of nitrite and ascorbic acid using in emulsified sausage.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.15 no.2
• /
• pp.219-230
• /
• 2004

The purpose of this study is to improve the quality of white pan bread by adding polymannuronic acid, an excellent rheological properties material which has the high blood control function in seaweeds, to flour. To investigate the rheological properties appropriate to the making of white pan bread, amylograph, farinograph, extensography were done adding polymannuronic acid(0%, 1%, 3%, and 5%) to flour. The gelatinization condition between flour and compositic flour, amylogram was done. The result was that the gelatinization temperature in flour(100%) was $61.0^{\circ}C$, as polymannuronic acid rate was increased by 1%, 3%, 5%, thetemperature was all the same, $63.5^{\circ}C$. The maximum viscocity temperature of flour(100%) was $92.0^{\circ}C$. that of flour added polymannuronic acid (1%) $92.5^{\circ}C$, those of flour added polymannuronic acid (3%, 5%) unchangeable. $\alpha$ -amylase activity degree, maximum viscocity was that flour(100% was 525 BU, flour added polymannuronic acid (1%) 498 B.U, flour added polymannuronic acid (3%) 385B.U, flour added polymannuronic acid (5%) 360 B.U, highly decreased. Farinograph was done, as the additional quantity of polymannuronic acid increase(1%, 3%, 5%), water absorption rate increase much more thin the control. As the additional quantity of polymannuronic acid is added from 1% to 3%, development time of dough was increase, but one added 5% was decreased. In case of extensograph was done, resistance of dough increased but extensibility is decreased, so R/E value increased.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.199-207
• /
• 2010

This research was conducted to determine the influence of physiological and chemical properties of root substrates on the growth of the daughter plants of 'Maehyang' strawberry produced by bag culture. The daughter plants produced by stock plants during bag culture were individually separated and grown in 10-cm diameter plastic pots containing six different formulations of root substrates: a) 50% peatmoss plus 50% vermiculite (5:5 by volume, A), b) 70% peatmoss plus 30% perlite (7:3, B), c) 70% coir dust plus 30% perlite (7:3, C), d) mixture of 35% coir dust, 35% peatmoss, and 30% perlite (3.5:3.5:3.0, D), e) mixture of 20% rice hull, 70% coir dust, and 10% perlite (2:7:1, E), and f) 30% rice hull plus 70% coir dust (30:70, F). The container capacity and air filled porosity of the growing medium varied greatly among the six substrate formulations evaluated. The substrates E and F had less container capacity and higher air-holding spaces than the rest of the formulations. Therefore, these two formulations (E and F) may cause a problem in water management during the production of healthy daughter plants. The substrate formulations A, B, and D retained higher nitrogen (N) concentrations than other formulations containing coir dust or rice hull. The substrate formulations E and F which contained rice hull had lower N, phosphorus (P), and potassium(K) concentrations than other substrate formulations containing coir. The quality of the daughter plants grown in all six different substrate formulations was good with the crown diameters at around 10 mm. Fresh weights of the daughter plants grown in substrate formulations A, C, and D were higher than those obtained from B, E, and F. Dry weights of the daughter plants showed a similar trend. The daughter plants having high fresh and dry weights and increased crown diameter are in demand by the industry. For this reason, the substrate formulations A, C and D can readily be used as potting mixes during the production of 'Maehyang' strawberry transplants utilizing the bag culture system.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.193-202
• /
• 2009

This study was conducted to identify the magnitude of first flush in small city urban area and to provide the basic information on the criteria of stormwater runoff management. Monitoring site was surrounded by residential area in Gumi city near to national industrial complex and the monitoring period was three months. Total watershed area was 24.9 ha, where 80% of the area is impervious (asphalt of pavement type). Periodic monitoring of conventional water quality parameters were conducted with six times of rainfall period. Event mean and site mean concentrations for all the parameters were calculated based on the analytical results. Particle size distribution was 9.82 ${\mu}m$ for $D_{0.1}$, 38.99 ${\mu}m$ for $D_{0.5}$ and 159.61 ${\mu}m$ for $D_{0.9}$ respectively. First flush phenomenon was detected highly in particulate solids than dissolved ones. The first flush criteria results by mass first flush contained between 44.4% to 58.5% pollutant mass during the first 30% of runoff volume. Mass first flush ratio and particle size distribution obtained in this study are expected to provide the basic information for the design and operation of non-point source treatment facility.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.96-100
• /
• 2014

Recently, the management system of wastewater treatment facility has magnified due to the stringent regulations for the protection of the environment, and a sewage treatment plant efficiency and research of the car development are activated in large facilities or industrial park. however, the existing sewerage disposal system and specific water quality monitoring network reliability for real-time transmission of this building is insufficient. In this paper, we proposed a local wireless network design for sludge multi meter data collection and control for measuring the concentration of the sludge efficiently. Also, the collected data over the local wireless network to transmitted to the central monitoring system and accumulate the data in real time to calculate statistics is possible to monitor the status of the sewage treatment facilities. The proposed system uses a short-range wireless networks of IEEE 802.15.4 and configures an IEEE 802.11 network which can monitor real-time status in central system. Also, we install a sludge multimeter and communication network in sewage treatment facilities and confirm the usefulness of the proposed technique by demonstrating its effectiveness.

• Journal of Wetlands Research
• /
• v.20 no.1
• /
• pp.72-79
• /
• 2018

Two planter boxes were monitored during their initial year of operation to be able to assess their stormwater runoff and pollutant reduction capabilities and investigate on the design factors affecting their performance. One of the planter boxes provided 85-100% runoff volume reduction for rainfall less than 15 mm and rainfall intensities lower than 5 mm/hr. This reduced to 50-64% during higher rainfall intensities and depths of up to 50 mm. Suspended solids, organics, nutrients, and heavy metals were satisfactorily removed at a range of 40-95%. The other planter box, however, did not produce outflow in all the events and allowed total capture of stormwater. The uncertainty regarding the fate of the runoff in that case required an investigation of the planter box's actual drainage and underground conditions which was deemed outside the scope of the study. Nonetheless, several design improvements and retrofits were suggested based on the provisions of current design guidelines to ensure that the hydraulic and water quality goals are achieved without potential damage to nearby structures. Moreover, continuous monitoring data is required to provide more accurate design evaluation and can serve as a guide in the construction of similar facilities in the future.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.3
• /
• pp.161-183
• /
• 2017

The purpose of this study is to develop a concept map in a visual instructional strategy so that meaningful learning can be done by structuring knowledge in the section of eco-friendly clothing life and reform clothes. For this purpose, ten textbooks for the 2009 revised were analyzed, and 10 sub-area were selected to develop the concept map. The development was done by using Cmap Tools V6.02 and the study process has progressed content analysis, concept extraction, and concept map development. The analysis process and results of this study are as follows. First, in the course of setting standards, the analytical standards were set for the 2007 revision and 2009 revision curriculum achievement standards. Second, in the process of content analysis and concept extracting, through the analysis of textbooks, 'clothing selection and purchase', 'clothing care and management' and 'clothing reuse and eco-friendly'. The concept was extracted by subdividing on the basis of general and comprehensive core concepts. Third, the development process of concept map was developed and revised based on the extracted concepts, and the concept map developed was the 'clothing purchase plan', 'points to consider when buying clothing' 'quality', 'handle with care', 'classify laundry', 'remove stain', 'water washing', 'repair clothing', 'reform clothing', 'eco-friendly clothing life'.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.699-709
• /
• 2017

We measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in order to understand the spatial distribution and pollution level of organic matter and metals in surface sediment around Goseong Bay, a shellfish farming area, Korea. The surface sediments were composed of finer sediments such as mud and clay. The concentration of TOC, TN, and heavy metals were much higher in the innermost bay than in the mouth and outside of bay. The spatial distribution of organic matter and heavy metals and C/N ratio (5-10) in sediment showed that the organic matter and heavy metals in sediment of the study region were significantly influenced by oceanic origin organic matter and anthropogenic sources, respectively. Based on the results of four assessment techniques (sediment quality guideline, geoaccumulation index, pollution load index, ecological risk index), the sediments around the Goseong Bay were a little polluted for heavy metals and the high metal concentrations in the northern region of bay could adverse impact on benthic organisms in sediment. Thus, the systematic management plan for the improvement of water and sediment environment and the concentrated monitoring of pollutants for sustainable aquaculture and seafood safety around Goseong Bay are necessary in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.104-112
• /
• 2021

For extrusion processes in the process industry, the need to build smart factories is increasing. However, in most extrusion production sites, the production method is continuous, and because the properties of the data are undeed, it is difficult to process the data. In order to solve this problem, we present a methodology utilizing a near field communication (NFC) sensor rather than water-based data entry. To this end, a wireless network environment was built, and a data management method was designed. A non-contact NFC method was studied for the production performance-data input method, and an analysis method was implemented using the pivot function of the Excel program. As a result, data input using NFC was automated, obtaining a quantitative effect from reducing the operator's data processing time. In addition, using the input data, we present a case where a bottleneck is improved due to quality problems.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.241-262
• /
• 2021

This paper reviewed the necessity of a information and communication technology (ICT)-based smart livestock system as a development strategy for the animal life industry in the future. It also predicted the trends of livestock and animal food until 2050, 30 years later. Worldwide, livestock raising and consumption of animal food are rapidly changing in response to population growth, aging, reduction of agriculture population, urbanization, and income growth. Climate change can change the environment and livestock's productivity and reproductive efficiencies. Livestock production can lead to increased greenhouse gas emissions, land degradation, water pollution, animal welfare, and human health problems. To solve these issues, there is a need for a preemptive future response strategy to respond to climate change, improve productivity, animal welfare, and nutritional quality of animal foods, and prevent animal diseases using ICT-based smart livestock system fused with the 4th industrial revolution in various aspects of the animal life industry. The animal life industry of the future needs to integrate automation to improve sustainability and production efficiency. In the digital age, intelligent precision animal feeding with IoT (internet of things) and big data, ICT-based smart livestock system can collect, process, and analyze data from various sources in the animal life industry. It is composed of a digital system that can precisely remote control environmental parameters inside and outside the animal husbandry. The ICT-based smart livestock system can also be used for monitoring animal behavior and welfare, and feeding management of livestock using sensing technology for remote control through the Internet and mobile phones. It can be helpful in the collection, storage, retrieval, and dissemination of a wide range of information that farmers need. It can provide new information services to farmers.