• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.153-154
• /
• 2017

Graphene is a nanomaterial and is known to have very high mechanical strength, thermal and electrical properties. However, graphene is known to be difficult to disperse among carbon-based materials due to van der Waals force. In this study, to solve the dispersion problem of graphene nanoplatelet, oxidized graphene nanoplatelet was prepared by oxidizing GNP in nitric acid. The prepared GO was dispersed in ethanol and distilled water before incorporation into the epoxy paint to confirm dispersibility. In addition, GNP/Epoxy and GO/Epoxy tensile specimens were prepared by mixing GNP and GO at 0.1, 0.3, 0.5 and 1.0 wt.% In epoxy coatings and tensile stress-strain characteristics were investigated.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.177-186
• /
• 2011

We can expect reduction of the sunlight absorption quantity to a structure and an earth surface, a decline of the surface temperature and a decline of the heat transport volume in what there is a method I give the sunlight reflectance in the aspect to the surface of the building by painting sunlight high reflectance paint, and to reduce the sunlight absorption quantity to a structure and an earth surface and does so, and, in addition, a method high water retentivity of tree planting and the road surface of the city space uses evaporation latent heat of the water by making it, and to restrain a rise in temperature is thought about. and It is thought that I reduce the sunlight absorption quantity to not only the structure but also other structures and attention gathers to the reflexive reflector reflecting in the direction again and it is wide as a marker of a board and the clothing of the traffic sign and is used the incidence energy from a source of light for this reflexive reflector now by there is it and devises surface structure again, and controlling reflection directivity for the sunlight for the purpose of raising night visibility.

• 화훼연구
• /
• 제19권4호
• /
• pp.187-191
• /
• 2011

지온상승억제 효과는 차광망(50%) + 냉각수순환 평균 $18.8^{\circ}C$(최고 $23^{\circ}C$)가 가장 좋았으며, 차광망(50%) + 지하수순환 $23.2^{\circ}C(28.5^{\circ}C)$, 차광도포제(30%)와 차광망(50%)이 각각 $24^{\circ}C$(최고 $30^{\circ}C$) 순으로 나타났다. 고온기 근권냉각수 순환 효과가 가장 큰 모데나 품종은 절화장이 95.9 cm, 생체중이 67.0 g으로 가장 좋게 나타났다. 처리별 수량증가는 차광망(50%)처리에 비해 차광망(50%) + 냉각수순환이 121%로 가장 많았고, 차광망(50%) +지하수순환, 차광도포제(30%)는 각각 59%와 65% 증가하였다. 하우스내부 야간온도를 $8^{\circ}C$로 관리하였을 때 근권온수 순환이 평균 $18^{\circ}C$ 유지하여 무처리에 비해 약 $8^{\circ}C$ 정도 지온상승효과가 있는 것으로 나타났다. 동절기 지하부 온수순환처리에 의한 알스트로메리아 생육은 아스펜, 모데나, 샤넬 품종에서 절화장, 생체중 등 생육이 가장 좋았으며, 보르도 품종은 절화장이 다소 작게 나타났다. 근권온수 순환처리가 생육을 증가시킨 결과로 아스펜 등 4품종 모두에서 꽃목길이, 꽃목경경, 꽃수 및 꽃무게 등 절화품질 또한 증가하였다. 생산량 또한 크게 증가하여 모데나 품종에서 38% 이상으로 가장 높았고, 아스펜, 보르도, 샤넬 순이었다.

• 멤브레인
• /
• 제8권2호
• /
• pp.77-85
• /
• 1998

알루미늄 전착공정중 도료정제장치에서 발생하는 도료계 폐수(COD$_{Mn}$ 1,500~2,000 ppm)를 역삼투압을 이용하여 농축수는 전착조로 보내 재사용하고 반면 투과수는 세정수로 사용할 목적으로 시스템을 설계하여 현장 설치하였다. 역삼투압시스템은 폴리아미드 재질의 나권형 모듈(직경 102 mm$\times$ 길이 1,016 mm)3개를 직렬로 연결하고 시스템회복율 30%, 운전압력 11.5 kg/$cm^2$, 그리고 실온에서 3일 주기로 발생하는 폐수량 20 m$^3$을 회분식조업으로 처리하였다. 원폐수를 42시간 연속가동하여 5배까지 농축하는 실험기간중 거의 일정한 투과 flux 390 l/m$^2$-hr을 유지하였고 그 투과수질이 COD$_{Mn}$ 300 ppm으로 나타났다. 이는 도료정제장치의 잔존 도료성분을 회수하기 위해 사용되는 순수대신 세정수로 사용하기에 적합하였다. 그리고, COD$_{Mn}$ 제거율은 83$\pm$5%이었으며, 각 용제성 분별 제거율은 feed 농도의 증가에 따라 감소하였는데 5배 농축시 ethyl cellusolve, butyl cellusolve 그리고 n-butanol은 각각 79, 87 그리고 70%로 나타났다.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.531-538
• /
• 2012

Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.217-219
• /
• 2006

This study focused an water quality response to land-based pollution loads and the appropriate pollutant load reduction in Chinhae Bay using an eco-hydrodynamic model. Land-based discharge foam urban areas, industrial complex and sewage treatment plant was the greatest contributor to cause red-tide blooms and summer hypoxia. Tidal currents velocity af the ebb tide was about 10 cm/s stronger than that of the flood tide. A residual current was simulated to. have a slightly complicated pattern with ranging from 0.1 to. 2.7 cm/s. In Masan Bay, pollutant materials cannot flaw from the inner to the outer bay easily because af residual currents flaw southward at surface and northward at the bottom. The simulation results of COD distribution showedhigh concentrations aver 3 mg/L in the inner part of Masan Bay related pollutant discharge, and charge, and lower levels less than 1.5mg/L in the central part of Chinhae Bay. For improvement water quality in Chinhae Bay, it is necessary to reduce the organic and inorganic loads from paint sources by mare than 50% and ameliorate severe polluted sediment.

• 공업화학
• /
• 제4권4호
• /
• pp.823-829
• /
• 1993

Linseed oil fatty acid(LOFA), phthalic anhydride(PAA) 및 trimellitic anhydride(TMA), trimethylol propane(TMP)을 사용하여 기본적인 유장(oil length) 50%의 중유성 알키드를 합성하고 trimethylol propane triacrylate (TMPTA)를 그라프트 공중합시켜 수용성 TMPTA 변성 알키드수지를 제조하였다. 알키드수지의 산가는 TMA함량으로 제어하였으며, 수용화에는 N,N-Dimethylethanol amino(DMEA)를 중화제로 사용하였다. TMA함량에 따른 산가별 내수성 및 수용화의 최적조건을 산출한 후, TMPTA의 첨가량 변화에 의한 분자량, 유리전이온도, 수용화 후의 점성도, 그라프트율을 측정하였으며, 멜라민 수지를 사용하여 가교시킨 막의 경화온도별 겔분율변화를 조사하였다. TMA첨가량 5.3~7.0%, 산가 40~50의 범위에서 알키드 수지의 내수성과 수용화가 가장 좋은 균형을 나타냈으며, 변성 알키드수지의 경우 TMPTA의 양이 증가할수록 분자량, 수용액의 점성도, 겔분율은 증가하였으나, 유리전이온도(Tg)는 감소하였다. 고형분 함량에 따른 점성도 변화는 고형분 40%일 때보다 50%일 때가 점성도가 낮게 나타났으며 중화도에 따른 수용액의 점성도 변화는 중화도가 높을수록 점성도는 낮아지나 중화도 100~110 사이에서는 거의 변화가 없음을 알 수 있었다. TMPTA의 그라프트율은 TMPTA의 첨가량이 4wt%인 때가 가장 높게 나타남이 확인되었다.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.311-319
• /
• 2002

Environmental friendly acrylic/urea high-solid paint(MUHC) were prepared through the curing reaction of acrylics resin(EBHC) containing 70wt% of solids content and butylated urea curing agent. The synthesis of EBHC Was done at $150^{\circ}C$ for 6 hours, and the results were obtained as follows : $M_{n}=1830{\sim}2190$, $M_{w}$ $3290{\sim}4000$, $M_{w}/M_{n}$=1.80{\sim}1.83$ viscosity=$110{\sim}352$ cps, and conversion=$82{\sim}92$%. After the film was coated with MUHC, the various physical properties were measured. They showed that enhancement of the coating properties such as adhesion, flexibility, abrasion resistance, impact resistance, and water resistance could be expected through introdl1cing caprolactone acrylate component in acrylics resin for the high-solids content acrylics/urea coatings.

• 보존과학연구
• /
• 통권6호
• /
• pp.247-258
• /
• 1985

Conservation laboratory was attached to Keimyung University Museum inMarch 1980 and ever since it has been devoted mainly to the processing andconservation of metal objects. A number of objects have been processed inthis laboratory during the period, including those already in the collection ofthe Museum, those which were discovered during the three major excavationsof Kaya tombs conducted by the Museum, and those processed on commissionfrom other museums in the country,The activities of this laboratory include: (1) conserving the objects againstfurther erosion; (2) raising the archaeological value of the objects by revealingthe structure of such parts of the objects as concealed under rust; and (3)recovering the original shape of damaged objects.The methods adopted by the laboratory include: (1) removing from theobjects the ionized chlorine which usually are the major cause of erosion; (2)strengthening the objects by soaking them in acrylic resins; and (3) applyingresins to the surface of the objects to protect them from further erosion.Chemicals much employed by the laboratory includes the acrylic resin(Ruschot; developed jointly by the Cultural Property Research Institute ofKorea and Samwha Paint Company), the sodium sesquicarbonate, the sodiumhydroxide, the lithium hydroxide, and the benzotriazole.Major apparatus in the laboratory includes the vacuum immersion tank, theairbrasive, the ultrasonic cleaner, the pH-ion meter, the water bath, the zoomstereo microscope, the drying oven, and the drill.

• 한국환경과학회지
• /
• 제13권9호
• /
• pp.799-806
• /
• 2004

The filtration tests were made in cell with a low concentrated suspension. The suspension with a concentration of $C_{M}$=1.14～2.67$\cdot$$10^{-3}$ g/g consists of paper paint and water. The particles in the suspension have a particle size x<1${\mu}m$. The used depth filters consists of glass fibres, which are coated by polymer. The filtration in depth filters accorded in different mechanism, which were explained by physical models. The model which would be allows to make a promise of the filtration reaction. This filter media allows to get a high filtration time and a good separation rate. The Particle distribution is measured by a photon correlation spectroscopy(PCS). PCS measures particle sizes 0.03 ${\mu}m$${\mu}m$ in the suspension. The filtered suspension has a very low concentration Co{\le}5{\times}10_{-4}$ g/g of solid in sample. The PCS also informs us about the number of the particles in the suspension. The makes it possible to calculate the concentration of the in sample.