• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.201-208
• /
• 2022

Emulsion Liquid Membrane (ELM) is a prominent technique for the separation of heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of the components (Surfactant and Carrier) of ELM is a very significant step for its preparation. In the ELM technique, the primary water- in-oil (W/O) emulsion is emulsified in water to produce water-in-oil-in-water (W/O/W) emulsion. The water in oil emulsion was prepared by mixing the membrane phase and internal phase. To prepare the membrane phase, the extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2- ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II). Emulsion Liquid Membrane (ELM) is a well-known technique for separating heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of ELM components (Surfactant and Carrier) is a very significant step in its preparation. In the ELM technique, the primary water-in-oil (W/O) emulsion is emulsified to produce water-in-oil-in-water (W/O/W) emulsion. The water in the oil emulsion was prepared by mixing the membrane and internal phases. The extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2-ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II).

• Korea-Australia Rheology Journal
• /
• 제15권3호
• /
• pp.125-130
• /
• 2003

The emulsion stability of cosmetic creams based on the water-in-oil (W/O) high internal phase emulsions (HIPEs) containing water, squalane oil and cetyl dimethicone copolyol was investigated with various compositional changes, such as electrolyte concentration, oil polarity and water phase volume fraction. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The slope change of complex modulus versus water phase volume fraction monitored in the linear viscoelastic region could be explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsions: the greater the increase of complex modulus was, the more the coalescence occurred and the less consistent the emulsions were. Emulsion stability was dependent on the addition of electrolyte to the water phase. Increasing the electrolyte concentration increased the refractive index of the water phase, and thus decreased the refractive index difference between oil and water phases. This decreased the attractive force between water droplets, which resulted in reducing the coalescence of droplets and increasing the stability of emulsions. Increasing the oil polarity tended to increase emulsion consistency, but did not show clear difference in cream hardness among the emulsions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.88-92
• /
• 2006

This study is intended to check the flame temperature to raise in burning grade C heavy fuel oil and emulsion fuel oil in a boiler and to measure the concentration of Dry Shoot(DS) and Soluble Organic Fraction(SOF) after collecting the Particulate Matters (PM). The flames temperature in boiler was measured by burning grade C heavy oil and oil-water emulsion (C heavy oil $70\%\;and\;30\%$ of water) Combustion characteristics of two fuels was also compared by trapping particulate matters (PM) in exhaust gas and measuring the generated quantities of DS and SOF in fuel gas.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.836-847
• /
• 2016

본 연구는 바이오매스를 열분해하여 생성된 수상오일(water soluble oil)을 얻었다. MDO(Marine Diesel Oil)와 수상오일을 유화시켜 생성된 에멀젼 연료의 특성과 배출가스를 연구 하였다. 바이오매스로는 톱밥을 사용하였고 $500^{\circ}C$에서 열분해하여 생성된 물과 탄화수소를 응축시켜서 수상오일을 얻었다. 수상오일을 MDO에 10~20% 까지 혼합 후 유화시켜 에멀젼 연료를 만들었다. 엔진 배출가스 측정은 엔진 dinamometer로 실시하였다. 유화연료는 연소실내에서 미세폭발을 일으켜 연료를 잘게 쪼개어 주어 smoke를 감소시킨다. 그리고 물이 연소실내의 기화열을 빼앗아 연소실 내부의 온도를 낮추어 NOx 생성을 억제하는 효과를 갖는다. ND-13모드의 각 모드별 배출가스온도가 MDO에 비해 유화연료를 사용했을 때 낮게 나온 것으로 뒷받침 될 수 있었다. 유화연료의 함수율이 증가함에 따라 NOx와 smoke의 배출량은 줄어들었으며, 출력도 함수율 증가에 따라 유화연료 자체의 발열량 감소로 인하여 줄어든 것으로 판단된다. ND-13모드에서 MDO 유화연료를 시험한 결과 바이오매스오일 함유량 20%인 유화연료의 NOx 감소량은 약 25%, smoke의 총감소량은 약 60%, 그리고 약 15%의 출력손실을 확인하였다.

• 한국식품조리과학회지
• /
• 제33권1호
• /
• pp.113-120
• /
• 2017

Purpose: Lipid autoxidation of a soybean oil-in-water emulsion with high oil content was studied under after basil extract and/or iron addition. Methods: The emulsion consisted of tocopherol-stripped soybean oil (40 g), citrate buffer (60 g, pH 4.0), and/or $FeSO_4$ (0.5 mg) with 75% ethanol extract (200 mg/kg) of basil (Ocimum basilicum). Lipid oxidation was evaluated using headspace oxygen content, hydroperoxide contents, and p-anisidne values of the emulsion. Polyphenol compound retention in the emulsion during oxidation was determined spectrophotometrically. Results: Addition of basil extract significantly (p<0.05) decreased reduced hydroperoxide contents of the emulsion, and iron significantly (p<0.05) increased anisidine values and decreased oxygen contents. Co-addition of basil extract and iron showed significantly (p<0.05) lower reduced hydroperoxide contents in the emulsion than compared to those of the emulsion with added iron and the control emulsion without basil extract nor or iron. During the emulsion oxidation, polyphenol compounds in the emulsion with added basil extract were degraded, but more slowlywhich was slowed degraded in the presence of iron. Conclusion: The iIron increased the lipid oxidation through hydroperoxide decomposition, and basil extract showed antioxidant activity through radical-scavenging and iron-chelation. Polyphenol degradation was decelerated by iron addition, which suggested suggests iron chelation may be more preferred topreferentially activated over radical scavenging in the antioxidant action by of basil extract in the oil-in-water emulsion with high oil content.

• 한국축산식품학회지
• /
• 제38권3호
• /
• pp.580-592
• /
• 2018

The formulation of an oil/water (o/w) emulsion made up of a mixture of perilla oil and canola oil (30/70 w/w) was optimized using a response surface methodology to find a replacement for animal fat in an emulsion-type meat product. A 12 run Plackett-Burman design (PBD) was applied to screen the effect of potential ingredients in the (o/w) emulsion, including polyglycerol polyricinoleate (PGPR), fish gelatin, soy protein isolate (SPI), sodium caseinate, carrageenan (CR), inulin (IN) and sodium tripolyphosphate. The PBD showed that SPI, CR and IN showed promise but required further optimization, and other ingredients did not affect the technological properties of the (o/w) emulsion. The PBD also showed that PGPR played a critical role in inhibiting an emulsion break. The level of PGPR was then fixed at 3.2% (w/w total emulsion) for an optimization study. A central composite design (CCD) was applied to optimize the addition levels of SPI, CR or IN in an (o/w) emulsion and to observe their effects on emulsion stability, cooking loss and the textural properties of a cooked meat emulsion. Significant interactions between SPI and CR increased the cooking loss in the meat emulsion. In contrast, IN showed interactions with SPI leading to a reduction in cooking loss. Thus, CR was also removed from the formulation. After optimization, the level of SPI (4.48% w/w) and IN (14% w/w) was validated, leading to a perilla-canola oil (o/w) emulsion with the ability to replace animal fat in an emulsion-type meat products.

• 농업과학연구
• /
• 제43권2호
• /
• pp.249-257
• /
• 2016

In this study, rapeseed extracts were obtained by supercritical carbon dioxide fluid extraction of defatted rapeseed to evaluate the stability and antioxidant activity of an oil-in-water (O/W) emulsion system. The oil-in-water emulsions were prepared from stripped soybean oil with different concentrations (0.3, 0.4, 0.5, and 0.6%) of rapeseed extract as an emulsifier. Their emulsion stability was compared to that of emulsions prepared with the commercial emulsifier, Tween 20 (Polysorbate 20, 0.2%). After stripping the soybean oil, the total tocopherol content was reduced from 51.4 g/100 g to 1.1 g/100 g. Emulsion stability and oxidative stability of emulsions prepared with Tween 20 and rapeseed extract as emulsifiers were evaluated. For 30 days droplet sizes of emulsions containing rapeseed extract (0.4, 0.5, and 0.6%) were not significantly different (p > 0.05). Similar results were obtained for emulsion stability (ES) and Turbiscan analysis, suggesting that the addition of rapeseed extract increased emulsion stability. The addition of rapeseed extract at more than 0.4% resulted in an emulsion stability comparable to the addition of 0.2% Tween 20. The antioxidative ability of rapeseed extract increased with the amount added in the emulsion. Moreover, the addition of 0.6% rapeseed extract resulted in the lowest emulsion peroxide values (10.3 mEq/L) among all treatments. Therefore, according to the stability of its antioxidative and physical stability properties, rapeseed extract from super critical extraction could be successfully applied to the food and cosmetic industries.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.111-115
• /
• 1998

We investigated the stability of all-trans-retinol on the liquid crystalline O/W emulsion composed of mainly alkyl polyglycerine, alkyl polyglucose and glycerine, and compared the activity of all-trans-retinol in the various forms of liquid crystal. Under certain conditions, novel liquid crystalline gel was formed around oil droplets, and layers of this liquid crystalline gel were very wide and rigid. (SWLC; Super Wide Liquid Crystal) SWLC was very helpful to stabilize retinol in O/W emulsion. After storage at 45 C for 4 weeks, all-trans-retinol in O/W emulsion composed of SWLC retained above 85% of the activity upon HPLC analysis, whereas those within no liquid crystalline emulsion gave 47% and normal liquid crystalline emulsion composed of fatty alcohols gave 40 60%. Retinol in oil phase is nealy insoluble in pure water, but in cosmetic emulsion systems can be slightly solubilized into water because emulsifiers and polyols in emulsion systems function as solubilizers. In this case, water in outer phase acts as a media for oxygen transporation$.$and thus destabilizes retinol. As a result, retinol in O/W emulsion has a tendency to become unstable. SWLC surrounding oil droplet which contains retinol is wide and rigid, therefore reduces contact between inner phase and outer phase To make SWLC, properties of emulsifiers are very important phase transition temperature should be high, and the structure of surfactants should be bulky, and their ratio should be suitable to make rigid and wide liquid crystalline gel layer in order to reduce contact between retinol in inner phase and water in outer phase.

• 대한화장품학회지
• /
• 제36권1호
• /
• pp.1-16
• /
• 2010

본 총설에서는 나노미터 크기의 고체 입자가 오일-물 계면에 흡착됨으로써 안정화된 에멀젼의 제조와 성질에 대하여 기술하였다. 이렇게 제조된 에멀젼을 Pickering 에멀젼이라 하며 이 에멀젼을 계면활성제로 안정화된 일반적인 에멀젼과 비교하였다. Pickering 에멀젼의 독특한 성질은 입자의 계면 흡착 에너지가 큰 점에 기인하며 일반 에멀젼과 주요한 차이점은 고체 입자가 비가역적으로 계면에 흡착한다는 사실이다. Pickering 에멀젼의 전상은 w/o (water-in-oil) 타입에서 o/w (oil-in-water)로 수상의 분율이 증가함에 따라 발생한다. 친수성의 입자는 o/w 에멀젼을 형성하는 경향을 보이고 친유성 입자는 w/o 에멀젼을 형성하는 경향을 보이며 이는 고체 입자의 오일-물 계면에서의 접촉각에 따른다. Pickering 에멀젼의 안정성은 많은 부분에서 일반적인 에멀젼과는 다른 거동을 보였다. 저자는 또한 Pickering 에멀젼의 화장품 응용 가능성에 대해서도 논의하였다.

• Journal of Pharmaceutical Investigation
• /
• 제23권3호spc1호
• /
• pp.19-30
• /
• 1993

The influence of emulsion type of tegafur, an oral anticancer agent, on lymphatic transport was studied in rats. The water-in-oil-type of emulsion and the oil-in-water-type emulsion of tegafur each in 50 mg, calculated in terms of tegafur, were prepared by adding tegafur aqueous solution to sesame oil containing hydrogenated castor oil following ultrasonic treatment, and then the prepared emulsions and aqueous solution as a comparative formulation were administered orally to rats (50 mg/5 ml/kg). The concentration levels of tegafur in plasma of femoral artery and lymph from thoracic duct cannula were measured simultaneously along a time course after administration and the pharmacokinetic parameters were investigated. At the same time, we examined the above described factors of 5-FU which is known as an active metabolite of tegafur. In comparison with tegafur solution, AUC and mean residence time of plasma tegafur were significantly increased in w/o-emulsion but significantly decreased in o/w-emulsion. Lymph flow rates were similar in both solution and w/o-emulsion but half in o/w-emulsion. Ratios between area under the lymph and plasma concentration time curves were always less than 1 reflecting the passive lymphatic delivery after oral administration of the prepared tegafur emulsions, but those to the 5-FU in the case of w/o-emulsion were more than 1. These results suggested that lymphatic delivery of tegafur by w/o-emulsion was more effective than that by o/w-emulsion due to its differences of formation ability of chylomicrons.